• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.367-372
• /
• 2006

When we design a linear motor, the thermal behavior investigation is one of great important considerations with respect to uniform thrust force and thermal deformation of a linear motor. In this study, we conduct the research for the structural design of the linear motor for LMTT(Linear Motor-based Transfer Technology) which is the next generation of container horizontal transfer system in order to automate a container terminal. After the dimensions of main parts for a linear motor were set up, we carried out the thermal-structural analysis of the linear motor considering the thermal analysis of the stator module.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.60-63
• /
• 1991

Nowadays inverters are widely used for energy-saving and factory automation. Accordingly the characteristics and functions of the inverter are well understood. To our surprise, the characteristics and functions of the inverter-driven induction motor are not well understood. In this technical review, the electrical and mechanical characteristics of the inverter-driven motor, the optimal combination of the inverter with motor, the special design of the inverter-driven motor, and the application of the inverter with the existing motor are given, based on ABB Drives' experiences and technical data.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1998.11a
• /
• pp.192-197
• /
• 1998

This study has been focused on the selection of optimal electric motor load, which takes a lot of portions of motor driving factor in the building. Based on the past design data for existing electric motor load and method of calculation, it is known that in general electric machine load has been estimated excessively. For the accurate calculation, it is important apply to motor driving factor to be actually provided.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1126-1128
• /
• 2005

In this paper, electromagnetic vibration soruce of BLDC motor is analyzed, and a method of reducing vibration is presented. The vibration sources of BLDC motor are cogging torque and commutation torque ripple. The effectiveness of the proposed method were verified with experiments on FFT analysis.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.2
• /
• pp.213-221
• /
• 2012

Purpose : The purpose of this study was to investigate the effect of Vojta therapy on Gross Motor Function Measurement(GMFM) and Selective Voluntary Motor Control (SVMC) in children with Spastic diplegia. Methods : During this experiment, the subject of four children diagnosed with spastic diplegia was tested using ABA design for Single-subject Experimental Research Design. The procedure consisted of baseline, intervention and follow-up phase which was held thirty minutes each for three times a week for a total of 24 times. Gross motor function was measured using GMFM and selective voluntary motor control was measured using SCALE. Results : According to this study, the gross motor function and selective voluntary motor control of all subjects were improved from their intervention phase to their baseline phase. During the follow phase which the intervention was removed, the ability that was enhanced during the prior phases was still either maintained or only reduced slightly. Conclusion : The Vojta therapy used on children diagnosed with spastic diplegia was effective on both GMFM and SVMC. In other words, the therapy was effective on coordination. However, this study is difficult to be generalized due to the insufficient number of subject. In further studies, it will be necessary to increase the number of trials with a control group in order to generalize the effectiveness of Vojta therapy.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.10
• /
• pp.1065-1072
• /
• 2008

A HDD adopts a sensorless brushless DC (BLDC) motor as a spindle motor. Because there is no direct sensor measuring rotor position. open loop commutations with inductive sensing are used to increase the rotor speed up to a certain speed where the zero crossings of the back electromotive force (EMF) voltage are measurable. Therefore, successful open loop commutations are necessary for the stable start-up control of the spindle motors. In this paper, the time scale and the number of the open loop commutations are employed for design parameters to guarantee robustness to torque constant variation and initial rotor position. The design results are verified by experiments on a very low current start-up of the spindle motor with various environment. The experimental results show that the design results can decrease the start-up failure rate considerably.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.315-317
• /
• 2002

The value of I$_{c}$(critical current) in HTS (High Temperature Superconducting) tape has a great influence on B(equation omitted) (magnetic field amplitude applied perpendicular to the tape surface). Therefore, I$_{c}$ of HTS magnet is determined by not only operating temperature but also the B(equation omitted). In shape design of field coil for the HTS motor, a method to reduce the B(equation omitted) and to determine operating current should be considered in order to optimal design. On the basis of the magnetic field analysis, this paper deals with various field coil shape to obtain operating current of HTS motor by using analytical method. And also this paper discusses the operating current of 100hp class HTS motor by using I$_{c}$-B(equation omitted) curve.curve.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.158-160
• /
• 2006

The structure of interior permanent magnet type brushless DC motor (IPM type BLDC motor) has high saliency ratios that produce additional reluctance torque. But this structure has a significant cogging torque that may cause acoustic noise and vibration. In this paper describes an optimization of flux barrier in order to reduce cogging torque and torque ripple in IPM type BLDC motor using the Taguchi methods. The optimal design consider- ed noises such as manufacturing tolerances of permanent magnet size. So, optimal design ensures that torque performance is insensitive to noise.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.13-15
• /
• 2003

This paper presents a design and characteristics analysis of a SRM drive for EPS application. A rack mounted EFS system is considered in this paper. A conventional driving room space and mechanical structure are suggested in design stage. In the restricted design conditions, motor parameters are determined for sufficient torque and speed. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis designed motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by the manufactured prototype motor drive tests.

• Journal of Power Electronics
• /
• v.1 no.1
• /
• pp.19-25
• /
• 2001

A high speed, three phase, 12/8 pole, 225 kW switched reluctance motor (SRM) has been designed and analyzed. A circuital approach has been used to find the geometry, windings parameters and electromagnetic loading. Then, the 3D finite element method (FEM) has been used to calculate the static torque more accurately and optimize the design. The efficiency of the designed SRM is almost constant over wide range of speed and its phase current is less sensitive to the speed than that of an induction motor of the same rating. Recommendations for manufacturers and users are given.