• 한국의상디자인학회지
• /
• 제5권1호
• /
• pp.73-83
• /
• 2003

Out of a total of 437 subjects surveyed, 83.3 put on motocycle suits when they drive. Though the suits are not comfortable, many motocycle riders put them on for safty reasons. To protect a driver's body, motocycle suits should be patched with protective bands or safty pads in various areas like part of waist, backbone, pelvis and knees. The ratio of dissatisfaction with the preceding motocycle suits was great owing to inconvenience in washing and in posture, especially heavy suits. Their favorite suits were found to be linking or coupled types among two piece styles. Leather was shown to be the preferable material and they wanted designs which the protective bands, or pads can be attatched on each portion for needs of safty against impact but designed for comfort and ease of movenment.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.277-282
• /
• 2006

With the aim of achieving half the regulated value of EURO-3 Emission Regulations, an ultra low emission motorcycle has been developed based on a motorcycle with an 1800 $cm^3$, horizontal opposed 6-cylinder engine. For the fuel supply system, an electronically controlled fuel injection system was applied. For the emission purification system, three-way catalysts, a feedback control system with a LAF(Linear Air-Fuel ratio) sensor, and a secondary air induction system were applied. To reduce CO and HC emissions during cold starting, an early catalyst activation method combining RACV(Rotary Air Control Valve) and retarded ignition timing was applied. After the catalyst activation, air-fuel ratio was controlled to maximize the purification ratio of the catalyst according to vehicle speed. For the air-fuel ratio control system, the LAF sensor was used. Furthermore, fine adjustment by the LAF feedback control reduced torque fluctuation due to the air-fuel ratio change. As a result, smooth ride feeling was maintained. Owing to these technologies, half the regulated value of EURO-3 has been achieved without any negative impact to the large-scaled motorcycles' drivability. This paper presents the developed ultra low emission technologies including the control method using an LAF sensor.

• 한국대기환경학회지
• /
• 제30권5호
• /
• pp.449-460
• /
• 2014

Since the emergence of domestically produced automobiles in 1964, the number of automobiles in circulation in South Korea has increased constantly. With this rapidly increasing number of automobiles, automobile-induced environmental pollution has become an issue of great concern, especially with regard to air pollution. Of the carbon composites contained in automobile exhaust gas, PAHs are known to be carcinogenic and highly deleterious to humans and thus need to be urgently mitigated. To address this issue of PAHs, this study was conducted to estimate qualitative of particulate PAHs contained in carbon composites in automobile exhaust gas, by capturing all particulate matter discharged from the latter. To allow for differentiated analyses, the automobiles investigated were divided into 4 groups: gasoline vehicle, motocycle, diesel vehicle, and LPG vehicle. Samples were analyzed using two methods. First, in-depth analysis was performed on organic carbon (OC) and elemental carbon (EC) composites with analysis parameters, using the Thermal Optical Transmittance Method (NIOSH 5040). Second, for the examination of particulate PAHs, GC/MSD was used to analyze the 16 PAH species specified by the Environmental Protection Agency (EPA). The analyses yielded the findings that diesel vehicles had the highest mass concentration ($2,007{\mu}g/m^3$), followed by motocycle ($1,066{\mu}g/m^3$), LPG vehicle ($392{\mu}g/m^3$), and gasoline vehicles ($270{\mu}g/m^3$). The highest carbon concentrations in total particulate matter by vehicle weight were produced from LPG vehicle (79.8%), followed by gasoline vehicle (77.4%), motocycle (69.8%), and diesel vehicle (59.1%).

• 전기학회논문지
• /
• 제65권1호
• /
• pp.165-170
• /
• 2016

Recently, IoT(Internet of Things) technology is widely applied in not only our everyday lives but also in industry, medical field and security system. NFC system, the basis of IoT, is in the spotlight which can be an alternative solution of a anti-theft system for motorcycle as they basically have practicality and security issues. Anti-theft system for motorcycle using the NFC smart devices based on RFID has been proposed. because Progress of Smart Device If someone get the Key for motorcycle theft, he can be easily stolen motorcycle. We thought about the concept of NFC security devices as a wireless key and automatic solenoid valve for setting the lock and unlock module. In this study, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.108-114
• /
• 2007

This research represents the catalytic converter for application in the motorcycle. We have to consider about catalytic converter for reducing exhaust gas strength regarding the displacement volume enlargement. The catalytic converter has been widely used to satisfy the regulations of pollutant emissions from automobiles. Recently, all catalytic converter researches are about automobile. Study about motorcycle catalytic converter has not been conducted yet. In this study, flow uniformity and pressure distribution were simulated in the monolithic inlet of catalytic converter for motorcycle. Exhaust pulsation pressure was set as transient condition about. It was found that flow uniformity shown in base model (0.85) was lower than megaphone model (0.98).

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 추계학술발표대회
• /
• pp.1348-1351
• /
• 2012

본 연구는 오토바이에서 생성되는 유선통신 신호와 GPS를 이용한 속도를 수집하여 헬멧에 전송하여 스마트폰을 이용해 현재 위치정보와 오토바이에서 전달되는 속도 정보 등을 저장한 블랙박스 App과 무전 기능인 멀티통신 App을 개발했다. 또한 오토바이에서 생성된 속도 데이터나 신호 데이터값을 거치대를 통해 헬멧으로 전달되어 헬멧에 Headup Display를 통해 운전자에 전달하는 Headup Display를 탑재한 헬멧을 연구개발 하였다. 본 연구의 결과물은 오토바이 등 여러 사람이 함께 이동하면서 서로의 정보를 실시간으로 공유할 수 있어서 효과적으로 활용할 수 있다. 연구의 한계점은 연구소에서 실험적으로 개발 운용한 모델로서 상업적인 접근에 대한 구체적인 방안이 필요하다.

• 대한물리치료과학회지
• /
• 제3권2호
• /
• pp.1011-1019
• /
• 1996

The incidence of spinal cord injury increase due to traffic accident, industrial accident and leisure sports. Spinal cord injury damages motor and sensory function below the injury level, also affects autonomic functions associated with voiding and defecation. Sexual dysfunction and psychosocial, vocational maladaptations are also some of the unwanted consequences of injury. The purpose of this study is look for means to prevent and to manage complications in spinal cord injury through investigation and analysis. The subjects of this study in spinal cord injured patients were admitted to the department of physical therapy, Kwangju christian Hospital, Nam Kwang Hospital, Chun Nam university Hospital and Cho Sun university Hospital, from April, 1, 1995 to March, 31, 1996. The results are as follows: 1. The subjects comprised 96 cases of spinal cord injury, ranging from 17 to 85(mean-40.8 yrs) and included 72 males and 24 females. Among these patients, 58 were cervical injury, 20 were thoracic injury and 18 were lumbar injury. 2. As for a major causative of spinal cord injury were traffic accident(59.4%), fall down (27.1 %), and motocycle(4.2%).. 3. The bladder control were taken by indwelling cathetar(41.7%), Crede maneuver(37.5%) and self voiding(16.7%). The bowel control were taken by all aid(61.5%), assitance(32.3%) and self defecation(6.2%). 4. Possible of sexual function were 35 cases (47.9%). 5. The device of transfer used wheel chair(69.8%) and bed(16.7%). 6. The patients with higher cord lesion got more serious pain than lower cord lesion. Also the patients with higher cord lesion got a serious spasticity. 7. The incidence of decubitus ulcer among 96 patients were in case 46(47.9%). The largest group of the pressure sore sites were sacral portion(82.0%), less than 1 month of onset occured a large numbers(50%). Incidence of pressure sore by spasticity occured many patients in case of mild or moderate. Incidence of pressure sore by pain occured many patients in case of severe pain.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.161-170
• /
• 2008

본 연구는 차종별 사고모형을 다루고 있다. 연구의 목적은 청주시 143개 4지 신호교차로에서 발생한 차종별 사고모형을 개발하는 것이다. 이를 위해 이 연구는 EPDO(대물피해환산법)와 교통 및 기하구조 요인과의 관계를 설명하는데 중점을 두고 있다. 분석된 주요결과는 다음과 같다. 첫째, 신뢰수준 90% 이내에서 통계적으로 유의한 6개의 음이항 회귀모형이 개발되었다. 둘째, 모형의 ${\rho}^2$값은 0.14307(승용차), 0.35556(대형승합차), 0.21684(소형승합차), 0.205152(이륜차), 0.32338(소형트럭), 0.29046(대형트럭)으로, 이는 모두 통계적으로 의미있는 것으로 분석된다. 마지막으로 모든 모형의 공통된 사고요인은 ADT(일평균교통량)이며, 승용차의 특정 사고요인으로는 주도로차로폭합, 대형승합차의 경우 평균황색시간, 그리고 소형승합차의 경우 주도로와 부도로의 차로수 차이로 분석되었다.

• 한국인터넷방송통신학회논문지
• /
• 제21권1호
• /
• pp.141-148
• /
• 2021

일부 네거리나 혼잡도로에서 특정 시간대에 행인이 많고 도로가 막혀서 발생하는 교통사고가 적지 않다. 특히 인근에 학교교차로가 있어 바쁜 시간에 학생들의 교통안전을 지키는 것이 중요하다. 과거에는 교통 신호등을 설 계 했을 때 행인의 안전성을 고려하지 않고 자동차 인식과 교통 최적화에 대하여 연구 했다. 행인, 특히 학생들의 안전을 확보하는 전제에서 가능한 한 도로의 소통을 유지하는 것이 본 연구의 중점적인 연구 방향이다. 본 연구는 사람, 오토바이, 자전거, 자동차, 버스의 식별문제를 중점적으로 연구할 것이다. 조사와 비교를 통해 본 연구는 YOLO v4 네트워크로 목표물의 위치와 수량을 식별하는 것을 제시한다. YOLO v4는 작은 목표물의 식별 능력이 강하고 정밀도가 높으며 처리속도가 빠르다는 특징을 가지고 있으며, 데이터 수집 대상을 설정하여 이미지 집합을 훈련하고 테스트 한다. 움직이는 영상에서 목표물의 정확도, 실수율과 누락율에 대한 통계를 사용하여, 본 연구에서 훈련된 네트워크는 움직이는 이미지 속의 사람, 오토바이, 자전거, 자동차와 버스를 정확하게 식별 할 수 있다.