• 한국지능시스템학회논문지
• /
• 제17권5호
• /
• pp.582-590
• /
• 2007

천정주행 크레인의 고속 권상작업 및 흔들림 억제 궤적추종을 위한 비선형 적응제어 방법을 제시한다. 천정주행 크레인의 흔들림 운동은 트롤리의 가속도. 권상로프의 길이 및 권상속도와 강하게 결합되어 있다. 이는 비간섭 제어 기반의 흔들림 억제 궤적추종 제어법칙을 설계하는데 있어 장애요인으로 작용한다. 이러한 문제를 해결하기 위해, 트롤리의 가속도와 권상속도의 영향을 최소화하는 방법으로 불확실성이 존재하는 경우에도 흔들림 운동의 궁극적 균일 유계성을 보장하는 퍼지 비선형 적응형 흔들림 억제 궤적추종제어법칙을 제안한다. 특히, 제안한 방법은 파라미터 변화. 외란 등을 포함한 시스템 불확실성을 퍼지 불확실성 관측기를 이용하여 보상한다. 따라서, 퍼지관측기의 근사화 오차가 영으로 수렴할 때 추종오차 및 흔들림 각도의 궁극적 한계치는 영으로 감소한다. 끝으로 제안한 방법의 성능검증을 위한 모의실험 견과를 제시한다.

• 방송공학회논문지
• /
• 제7권2호
• /
• pp.181-191
• /
• 2002

능동 감시 카메라에서 얻어진 연속 영상에는 카메라의 움직임에 의해 발생하는 전역 움직임과 이동 물체의 국부 움직임이 동시에 존재한다. 따라서 이동 물체의 자동 추적을 위한 영상 기반의 실시간 감시 시스템의 구현을 위해 이동 물체의 국부 움직임만을 검출하고 추적할 수 있는 효과적인 알고리즘이 요구된다. 이 논문에서는 연속 영상의 차영상을 이용하는 빠르고 효율적인 움직임 검출 및 추적 알고리즘을 제안한다. 이 알고리즘은 우선 물체의 속도를 고려하여 이전 영상을 선택하고. 현재 영상과 선택된 이전 영상에 존재하는 전역 움직임을 빠르고 정확하게 추정하기 위해 신뢰성 있는 소수의 정합 블록만을 선택하여 사용한다. 마지막으로 현재 영상과 전역 움직임이 보상된 이전 영상의 차영상을 얻고, 현재 영상과 차영상의 상관 관계를 이용하여 차영상에 존재하는 강한 잡음을 효과적으로 제거하여 이동 물체 영역을 추출한다. 팬틸트 유닛과 AMD 800MHz 프로세서가 내장된 PC로 구성된 능동 카메라 시스템에 제안한 알고리즘을 적용하였다. 이 시스템은 320$\times$240 크기의 영상을 처리하며 수평 수직 방향의 $\pm$20 탐색 영역에서 전역 움직임을 추정할 때 약 50 frames/sec 의 속도로 움직임 검출이 가능하므로 빠른 이동 물체의 실시간 추적에 적합하다.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.155-163
• /
• 1996

This paper presents vibration and position tracking control of a smart structure using shape memory alloy(SMA) actuators. A governing equation of motion of the proposed structure is obtained via Hamilton's princeple. The dynamic characteristics of the SMA actuator are experimentally identified and incorporated with the governing equation to furnish a control system model. Subsequently, a sliding mode controller which has inherent robustness to external disturbances is formulated on the basis of the sliding mode conplacement, and also for the position tracking control of desired trajectories with low-frequency sine and square waves.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.140-146
• /
• 1995

In case the uncertainty existing in a system is assumed to satisfy the matching condition and to be come-bounded. Y. H. Chen proposed an adaptive robust control algorithm which introduced adaptive sheme for a design parameter into robust deterministic controls. In this paper, the adaptive robust control algorithm is applied to the position tracking control of direct drive robots, and simulation and experimental studies are conducted to evaluate control performance.

• Journal of Computing Science and Engineering
• /
• 제7권2호
• /
• pp.122-131
• /
• 2013

The MPI CyberMotion Simulator provides a unique motion platform, as it features an anthropomorphic robot with a large workspace, combined with an actuated cabin and a linear track for lateral movement. This paper introduces the simulator as a tool for studying human perception, and compares its characteristics to conventional Stewart platforms. Furthermore, an experimental evaluation is presented in which multimodal human control behavior is studied by identifying the visual and vestibular responses of participants in a roll-lateral helicopter hover task. The results show that the simulator motion allows participants to increase tracking performance by changing their control strategy, shifting from reliance on visual error perception to reliance on simulator motion cues. The MPI CyberMotion Simulator has proven to be a state-of-the-art motion simulator for psychophysical research to study humans with various experimental paradigms, ranging from passive perception experiments to active control tasks, such as driving a car or flying a helicopter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.413-416
• /
• 2004

The tracking antenna system must be always pointed to a satellite for data link among moving vehicles. Especially, for an antenna mounted on a moving vehicle, it needs the stabilized the antenna system. So, software and hardware, signal processing of motion detection sensors, real-time processing of vehicle dynamics, trajectory estimation of satellite, antenna servo mechanism, and tracking algorithm, are unified in the antenna system. The purpose of this paper is to design the embedded tracking antenna control system for satellite communication. The embedded OS(Operating System) based stabilization and tracking algorithm was implemented. The performance of the designed embedded control system was verified by the real satellite communication test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1917-1920
• /
• 2003

Automatic tracking of a moving object such as a person is a demanding technique especially in surveillance. This paper describes an experimental system for tracking a moving object on the ground by using a visually controlled aerial robot. A blimp is used as the aerial robot in the proposed system because of its locality in motion and its silent nature. The developed blimp is equipped with a camera for taking downward images and four rotors for controlling the progression. Once a camera takes an image of a specified moving object on the ground, the blimp is controlled so that it follows the object by the employment of the visual information. Experimental results show satisfactory performance of the system. Advantages of the present system include that images from the air often enable us to avoid occlusion among objects on the ground and that blimp’s progression is much less restricted in the air than, e.g., a mobile robot running on the ground.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.140-147
• /
• 2008

This paper describes a Neural Network based PD control scheme for motion control of pneumatic servo cylinder. Pneumatic systems have inherent nonlinearities such as compressibility of air and nonlinear frictions present in cylinder. The conventional linear controller is limited in some applications where the affection of nonlinear factor is dominant. A self-excited oscillation method is applied to derive the dynamic design parameters of linear model. Based on the parameters thus identified, a PD feedback compensator is designed first and then a neural network is incorporated. The experiments of a trajectory tracking control using the proposed control scheme are performed and a significant reduction in tracking error is achieved by comparing with those of a PD control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.798-802
• /
• 2003

The robustness and reliability of vision algorithms is the key issue in robotic research and industrial applications. In this paper, the robust real time visual tracking in complex scene is considered. A common approach to increase robustness of a tracking system is to use different models (CAD model etc.) known a priori. Also fusion of multiple features facilitates robust detection and tracking of objects in scenes of realistic complexity. Because voting is a very simple or no model is needed for fusion, voting-based fusion of cues is applied. The approach for this algorithm is tested in a 3D Cartesian robot which tracks a toy vehicle moving along 3D rail, and the Kalman filter is used to estimate the motion parameters, namely the system state vector of moving object with unknown dynamics. Experimental results show that fusion of cues and motion estimation in a tracking system has a robust performance.

• Wind and Structures
• /
• 제14권6호
• /
• pp.517-536
• /
• 2011

The assessment of wind-induced motion plays an important role in the development and design of the majority of today's structures that push the limits of engineering knowledge. A vital part of the design is the prediction of wind-induced tall building motion and the assessment of its effects on occupant comfort. Little of the research that has led to the development of the various international standards for occupant comfort criteria have considered the effects of the low-frequency motion on task performance and interference with building occupants' daily activities. It has only recently become more widely recognized that it is no longer reasonable to assume that the level of motion that a tall building undergoes in a windstorm will fall below an occupants' level of perception and little is known about how this motion perception could also impact on task performance. Experimental research was conducted to evaluate the performance of individuals engaged in a manual tracking task while subjected to low level vibration in the frequency range of 0.125 Hz-0.50 Hz. The investigations were carried out under narrow-band random vibration with accelerations ranging from 2 milli-g to 30 milli-g (where 1 milli-g = 0.0098 $m/s^2$) and included a control condition. The frequencies and accelerations simulated are representative of the level of motion expected to occur in a tall building (heights in the range of 100 m -350 m) once every few months to once every few years. Performance of the test subjects with and without vibration was determined for 15 separate test conditions and evaluated in terms of time taken to complete a task and accuracy per trial. Overall, the performance under the vibration conditions did not vary significantly from that of the control condition, nor was there a statistically significant degradation or improvement trend in performance ability as a function of increasing frequency or acceleration.