• Journal of Platform Technology
• /
• 제6권3호
• /
• pp.23-30
• /
• 2018

동작 패턴 생성이란 로봇이 어떤 동작을 안정하게 수행하기 위해 미리 안정적인 동작 궤적을 계산해 내는 것을 말하며 자세 제어는 미리 생성된 동작 패턴을 이용하여 동작을 수행하는 도중 발생하는 외란을 제거하여 로봇의 자세를 안정 하게 만들어주는 것을 말한다. 본 논문에서는 수치적 방법이나 로봇의 상체 구조를 간략화하여 근사적으로 생성하는 기존의 보행 패턴 방법과는 다르게 범용적으로 사용 가능한 뉴럴네트워크 학습기법을 이용한 로봇의 동작패턴 생성방법에 대하여 연구한다.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8563-8567
• /
• 2015

본 동작포착 및 매핑 기반의 인간-로봇상호작용 플랫폼을 제안한다. 사람의 동작을 포착하고 포착된 동작에서 운동을 계획하고 기기를 작동하게 하는 포착, 처리, 실행을 수행하는 플랫폼의 설계, 운용 및 구현 과정을 소개한다. 제안된 플랫폼의 구현 사례로 신뢰성과 성능이 뛰어난 Kinect 기반 포착기, 처리기에 구현된 상호작용 사이버 아바타 로봇과 처리기를 통한 물리 로봇 제어가 기술되었다. 제안된 플랫폼과 구현 사례는 동작포착 및 매핑 기반의 새로운 기기 제어 작동 방식의 실현 방법으로 기대된다.

• 한국항공우주학회지
• /
• 제34권12호
• /
• pp.75-81
• /
• 2006

민간항공안전국 등급 2를 만족하는 헬리콥터 시뮬레이터에 사용되는 6자유도 운동구현장치 개발에 관해 기술하였다. 운동판과 제어 구동장치의 기구학적 및 구조적 해석을 통해 설계 제작된 운동구현장치의 시험 평가로부터 규정에 만족하는 결과를 보였고 이로부터 실제 헬리콥터 시뮬레이터로의 적용 타당성을 확보하였다. 또한 동품의 개발 결과로 인해 그간 유압 구동체계를 사용한 운동구현장치의 단점을 전기식 구동장치 적용을 통해 새롭게 개선함과 동시에 국내 최초로 10 톤급의 적재하중 능력을 보유한 6자유도 운동구현장치를 보급하게 되는 계기를 마련하였다.

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.143-150
• /
• 2017

본 논문에서는 스마트 폰 추적 및 색상 통신을 이용한 새로운 동작인식 플랫폼을 개발한다. 카메라가 탑재된 PC 혹은 스마트 TV와 개인 스마트 폰 가지고 영상을 기반으로 한 객체 인식 기술을 이용하여 동작 인식 유저 인터페이스를 제공한다. 사용자는 손으로 스마트 폰을 움직여 모션 컨트롤러처럼 사용할 수 있으며, 플랫폼에서는 이 스마트폰을 실시간으로 검출하고, 3차원 거리와 각도를 추정하여 사용자의 동작을 인식한다. 또한, 스마트 폰과 서버의 통신을 위하여 색상 디지털 코드를 이용한 통신 시스템이 사용된다. 사용자들은 색상 통신 방법을 이용하여 텍스트 데이터를 자유자재로 주고받을 수 있으며, 동작을 취하는 도중에도 끊임없이 데이터를 전송할 수 있다. 제안한 동작인식 플랫폼 기반의 실행 가능한 콘텐츠를 구현하여 결과를 제시한다.

• 한국컴퓨터정보학회논문지
• /
• 제23권8호
• /
• pp.17-23
• /
• 2018

In this paper, we implemented a flight posture simulator that intuitively understands aircraft flight posture and visualizes the principle of motion. The proposed system operates the 6 - axis motion platform according to the change of the navigation information and transmits the flight attitude to the simulator using the gyro sensor. A gyro sensor and an acceleration sensor are used together to analyze the attitude of the aircraft. The reason is that the gyro sensor has a cumulative error in the integration process. And the accelerometer sensor was compensated by using the complementary filter because noise was serious due to short term vibration. Using the compensated sensor information, the motion platform is operated by calculating the angle to be transmitted to the 6-axis motor. And visualization result is implemented using OpenGL. The results of this study can be used as teaching materials for students related to aviation in the future.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1841-1846
• /
• 2003

The mobile platform-manipulator discussed in this paper is a three link manipulator mounted on a mobile platform. This mobile manipulator is used for welding operation and it is able to operate in a narrow space. The task of the torch, which is mounted at the end effector of the manipulator, is to track along the seam line and the task of the mobile platform is to move the origin point of the manipulator in order to go away from the singularity of the manipulator’s configuration. In this paper, the path planning for the motion of two subsystems (i.e., the manipulator and the mobile platform) was presented by the decentralized control method. Two controllers for the mobile platform and the manipulator were designed, and the relationship between the independent controllers is its state information. The simulation results are also presented to demonstrate the effectiveness of the control method.

• 로봇학회논문지
• /
• 제12권2호
• /
• pp.184-193
• /
• 2017

This work shows how to create an algorithm and implementation for motion and image matching between a vehicle simulator and Unity 3D based virtual object. The motion information of the virtual vehicle is transmitted to the real simulator via a RS232 communication protocol, and the motion is controlled based on the inverse kinematics solution of the platform adopting rotary-type six actuators driving system. Wash-out filters to implement the effective motion of the motion platform are adopted, and thereby reduce the dizziness and increase the realistic sense of motion. Furthermore, the simulator system is successfully designed aiming to reducing size and cost with adaptation of rotary-type six actuators, real driving environment via VR (Virtual Reality), and control schemes which employ a synchronization between 6 motors and 3rd order motion profiles. By providing relatively big sense of motion particularly in impact and straight motions mainly causing simulator sickness, dizziness is remarkably reduced, thereby enhancing the sense of realistic motion.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1379-1394
• /
• 2002

In case of a single input single output (SISO) system with a nonlinear term, a signal compression method is useful to identify a system because the equivalent impulse response of linear part from the system can be extracted by the method. However even though the signal compression method is useful to estimate uncertain parameters of the system, the method cannot be directly applied to a unique system with hysteresis characteristics because it cannot estimate all of the two different dynamic properties according to its motion direction. This paper proposes a signal compression method with a pre-processor to identify a unique system with two different dynamics according to its motion direction. The pre-processor plays a role of separating expansion and retraction properties from the system with hysteresis characteristics. For evaluating performance of the proposed approach, a simulation to estimate the assumed unknown parameters for an arbitrary known model is carried out. A motion platform with several single-rod cylinders is a representative unique system with two different dynamics, because each single-rod cylinder has expansion and retraction dynamic properties according to its motion direction. The nominal constant parameters of the motion platform are experimentally identified by using the proposed method. As its application, the identified parameters are applied to a design of a sliding mode controller for the simulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1611-1616
• /
• 1991

A high power stewart platform is designed and manufactured to simulate the 6 degrees of freedom motion of moving vehicle. This paper describes the design of such a motion system including kinematic and kinetic analysis, real time servo control mechanical and hydraulic system configuration, and techniques of regeneration of test records. Discussions are also presented for an algorithm called remote parameter control, which has been developed to compensate the dynamic delay of the electro-hydraulic servo actuators and the nonlinearities of stewart platform.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1158-1161
• /
• 2004

This paper describes the construction of a half sphere screen driving tilting simulator that can perform six degree-of-freedom (DOF) motions simulator to a tilting train. The mathematical equations of Tilting Train dynamics are first derived from the 6-DOF bicycle model and incorporated with the bogie, carbody, and suspension subsystems. The equations of motion are then programmed by visual C++ code. To achieve the simulator functions, a motion platform that is constructed by six electric-driven actuators is designed, and its kinetics/inverse kinetics analysis is also conducted. Driver operation signals such as carbady angle, accelerator, and tilting positions are measured to trigger the Tilting dynamics calculation and further actuate the cylinders by the motion platform control program. In addition, a digital PID controller is added to achieve the stable and accurate displacements of the motion platform. The experiments prove that the designed simulator is adequate in performing some special rail road driving situations discussed in this paper.