• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.47-51
• /
• 2005

Using satellite images, an optimal solution to water motion has been presented in this study. Since temperature patterns are suitable tracers in water motion, Sea Surface Temperature (SST) images of Caspian Sea taken by MODIS sensor on board Terra satellite have been used in this study. Two daily SST images with 24 hours time interval are used as input data. Computation of templates correspondence between pairs of images is crucial within motion algorithms using non-rigid body objects. Image matching methods have been applied to estimate water body motion within the two SST images. The least squares matching technique, as a flexible technique for most data matching problems, offers an optimal spatial solution for the motion estimation. The algorithm allows for simultaneous local radiometric correction and local geometrical image orientation estimation. Actually, the correspondence between the two image templates is modeled both geometrically and radiometrically. Geometric component of the model includes six geometric transformation parameters and radiometric component of the model includes two radiometric transformation parameters. Using the algorithm, the parameters are automatically corrected, optimized and assessed iteratively by the least squares algorithm. The method used in this study, has presented more efficient and robust solution compared to the traditional motion estimation schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.963-968
• /
• 2005

For worm robots applied to pipe inspection and colonoscopy, earthworm-like robots that have a locomotion pattern in backward wave or green caterpillar-like robots that have a locomotion pattern in forward wave have been studied widely. Note however that a method using a single and fixed locomotion pattern is not desirable in the sense of mobility cost, if there are various changes in pipe diameter. In this paper, locomotion patterns are considered for a semi-looper-like robot, which adopts a locomotion pattern of green caterpillars as the basic motion and sometimes can realize a locomotion pattern of looper, whose motion approximately consists of two rhythms or relatively low rhythm.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.1014-1021
• /
• 2002

Analysis of two-dimensional secondary flows given by an oscillatory motion of a liquid with a free surface in a rectangular container subject to a linear reciprocating force is performed by numerical and experimental methods. FVM is used for the numerical computation of the two-dimensional flows. We considered the effects of the free-surface properties such as the surface tension and the dilatational viscosity. The boundary-layer analysis as well as an experiment is used in establishing the free surface properties. The secondary flow patterns are visualized by a laser sheet. It is shown that the secondary flow patterns predicted by the numerical methods are in good agreement with the experimental results.

• PNF and Movement
• /
• 제3권1호
• /
• pp.47-53
• /
• 2005

Purpose : To describes the important aspects of scapular movement and function used when applying PNF technique to the upper limb and scapular. Method : The scapular was a very important roles in the upper limb movement. This study summarizes the physiologic movement of scapular to the PNF upper extremity patterns or scapular patterns. Result : The shoulder joint has the most freedom of range of motion in the human body, composed of the glenohumeral joint, the subacromial joint, the acromioclavical joint, the sternoclavicular joint, the scapulothoracic joint, the costosternal joint, and the costovertebral joint. During upper limb movement, the scapular position change at the sternoclavicular joint and the acromioclavical joint. This concerted motion was characterized by scapulohumeral rhythm. In clinical situations, it is import to understand factors affect the scapulohumeral rhythm so that optimal evaluation and therapeutic intervention can be devised. Conclusions : The scapular movement depend on the proper and coordinated contraction of muscles. Physical therapists need to understand the normal scapular movement relationships of the scapulohumeral rhythm under different interventions for PNF techniques application.

• 디지털콘텐츠학회 논문지
• /
• 제9권2호
• /
• pp.305-315
• /
• 2008

기제안된 적응형 계층 육각 탐색은 적응형 육각 탐색에 기반한 고속의 계층형 블록 정합 알고리즘의 일종이다. 적응형 계층 육각 탐색은 고속 움직임 탐색이 가능한 적응형 육각 탐색의 장점을 유지하면서도 시공간 움직임 활동도가 높은 비디오 시퀀스에서 흔히 발생되는 국부 최소 문제를 적응적으로 경감시킬 수 있는 것이 특징이다. 본 논문은 적응형 계층 육각 탐색의 예측 화질을 개선하기 위해 이 탐색의 수평 편향 패턴과 수직 편향 패턴을 효과적으로 확장하는 방법을 제안함에 그 목적이 있다. 본 논문에서는 서로 다른 움직임 특성을 갖는 복수의 동영상 시퀀스들에 대한 컴퓨터 시뮬레이션 결과를 토대로 예측 화질과 연산 시간 측면에서 제안된 방법의 성능을 분석 평가하였다. 시뮬레이션 결과는 제안된 방법이 작은 움직임 탐색과 큰 움직임 탐색에 모두 적합함을 보여주었다. 제안된 방법은 육각 탐색 패턴의 확장 과정에서 추가적인 연산량 증가를 초래했지만 이 연산량의 증가에 상응하는 예측 화질 개선을 기할 수 있었다.

• PNF and Movement
• /
• 제6권3호
• /
• pp.29-35
• /
• 2008

Purpose : To describes the important aspects of the foot and ankle movement and function used when git and balance strategy. Method : The foot and ankle was a very important roles in the lower limb movement and gait. This study summarizes the physiologic movement of knee to the PNF lower extremity patterns. Result : The ankle joint composed of the talocural joint, the subtalarl joint, transverse tarsal joint, talocalcaneonavicular joint. The onset of dorsiflexion muscle activity starts in pre swing gait patterns. First contract muscle is the extensor hallucis. Activity of tibialis anterior and extensor digitorum longus quickly follows in mid swing gait phase. During stance phase, the soleus and gastrocnemius muscle provided plantar flexor torque, which muscle reacts quickly to restrain ankle dorsiflexion, and contributes modulated control of the ankle motion in gait patterns. Conclusions : The understanding of ankle kinematics, could provide a good therapeutic approach for improving gait patterns in patients with various pathological condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2451-2454
• /
• 2005

In recent years, the importance of the characterization of fall for a fracture prevention system keeps increasing since fracture from a fall can lead to serious health problems. Fall is one of the major sources which increase morbidity in elderly people. In terms of the cost and the influence to the quality of life, the most serious injury with hip fractures is caused by falls. The traditional methods in characterizing fall patterns have been mainly by the epidemiological surveys. With surveys, the exact data of fall patterns can not been acquired. In this paper, we measured and analyzed with the parameters related to fall pattern such as velocities and accelerations during the motion of falls using 3D motion capture program. We acquired the parameters of the fall pattern of intentional and unexpected fall. The result showed that the variation of velocity and acceleration during fall was very important in characterizing fall pattern, which of vital importance for the development of a fracture prevention system and for the safety of the elderly.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.179-190
• /
• 2017

Hand Accelerometer는 인간신체 운동 패턴을 실시간으로 파악하는데 널리 사용되고 있다. 그러므로 행동 유형을 정확하게 파악하는 것은 아주 중요하다. 이 과정에서 각 행동유형의 형태를 미리 정확하게 파악하는 것이 중요하다. 인간의 신체 행동은 센서를 통해 수집된 시계열 데이터로 표현된다. 이 데이터는 비안정적, 비선형적 성격을 가지고 있다. 그래서 이런 성격의 데이터의 유형을 효율적으로 추출하는 방법을 찾는 것은 매우 중요하다. 힐버트-황 변환은 비안정적 비선형적 요소를 시계열데이터에서 효율적으로 추출하는 방법이다. 이 방법을 위의 시계열 데이터에 적용한 결과 핵심패턴이 성공적으로 추출되었다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제18권1호
• /
• pp.23-28
• /
• 2012

본 논문은 동작 포착 장비를 통해 각각 따로 포착된 얼굴과 동작 데이터의 자동 동기화 기술에 대해 다룬다. 광학식 동작 포착 기기를 사용할 때 얼굴 표정과 동작의 포착은 별도로 이루어지는 경우가 많으며, 이 경우 두 데이터 간의 동기화 수행하여야 자연스러운 애니메이션을 만들 수 있다. 본 연구에서는 두 데이터 간의 공통 부분인 목 및 얼굴의 전체적인 움직임 데이터를 기준으로 비선형 시간 변형을 통해 동기화를 수행하는 기법을 제안한다. 연구 결과를 간단한 실험 시나리오에 적용하여 기술의 효과성 여부를 검증하였다.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.126-137
• /
• 1993

This paper presents an efficient method for the identification of motion error sources in NC machine tools by making use of the circular interpolation test, which is often used in estimating the motion accuracy of NC machine tools. Mathematical formulae are described for motion errors due to various kinds of error sources. Two identification formulae are proposed: one is based on the frequency analysis and the other is formulated with the weithted residual method. Motion error signal is classified into two patterns, mean errors(mean of CW and CCW test signals from mean errors). The sources of the mean errors are identified by using the frequency analysis technique and the sources of the deviation errors by the weighted residual formulaltion. A menu driven, user oriented, computer program is written to realize the full steps of the proposed identificationprocedure. Then, the identification method is applied to two NC machine tools.