• 제목/요약/키워드: Motion fraction

검색결과 223건 처리시간 0.025초

견관절 운동 분율의 측정 (Measurement of shoulder motion fraction and motion ratio)

  • 강영한
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제29권2호
    • /
    • pp.57-62
    • /
    • 2006
  • 연구 목적: 견관절 운동분율과 운동비의 측정과정을 이해하고, 견갑 흉곽관절과 관절와 상완관절의 운동비의 기준을 제시하고자 함이다. 연구대상 및 방법: 100명의 건강한 대상자를 연령대별(20, 30, 40, 50, 60대)로 20명씩 나누어 각각의 견관절 촬영과 분율을 계산하였다. 견갑극에 수직이고 관절와 면에 평행인 상을 재현하기 위하여 상완이 자연지위일 때 머리 방향 $15^{\circ}$, 90도 거상 시 $19^{\circ}$, 최대 거상 시 $22^{\circ}$로 입사각을 적용하였고, 몸의 회전 각도는 $40^{\circ},\;36^{\circ},\;22^{\circ}$로 시상면에서 외전시키며 촬영하였다. 관절운동 방향에 따른 운동 범위를 확인하기 위해, 측각도계(goniometer)를 이용하여 양측 견관절의 운동범위를 측정하였다. 전운동의 팔의 각도와 방사선 영상의 팔의 각도를 측정하여 상완관절 운동 각도와 견갑 흉곽관절의 운동 각도를 계산하였다. 결 과: 오른팔의 운동 분율은 $90^{\circ}$에서 남자 1.22, 여자 1.70 이었고, 최대 거상 시 1.63, 1.84였다. 왼팔은 $90^{\circ}$에서 1.31, 1.54, 최대 거상 시 각각 1.57, 1.32였다. 오른 우세팔은 $90^{\circ}$에서 1.58, 최대 거상 시 1.43이었고, 왼쪽 우세팔 각각 1.82, 1.94였다. 20대에서는 $90^{\circ}$ 거상 시 1.56, 최대 거상 시 1.52였고, 30대는 1.82, 1.43, 40대는 1.23, 1.16, 50대는 1.80, 1.28, 60대는 1.24, 1.75로 나타났다. 견관절의 운동 특성상 남녀에 따른 운동비, 우세팔과 비우세팔, 연령대에 따른 운동비를 측정하여 비교해 본 결과 유의한 차이가 없었다. 결 론: 견관절 운동 분율의 기준은 견관절의 운동장애를 확인하고 견관절 질환의 치료 후 정상적인 견관절 기능회복 여부를 확인하는데 도움을 줄 수 있을 것이다. 견관절 운동비 측정을 위한 운동 각도를 정확하게 측정할 수 있고, 실제 운동비를 계산할 수 있으면 방사선학적 자세와 입사각 설정에도 유용할 것이다.

  • PDF

폐암 환자의 정위적 체부 방사선 치료 시 IntraFraction CBCT를 이용한 치료 중 자세 오차 교정에 대한 고찰 (An investigation Of IntraFraction Motion Correction For Lung Stereotactic Body Radiation Therapy By Using IntraFraction Cone Beam Computed Tomography)

  • 송형석;조강철;박효국;윤종원;조정희
    • 대한방사선치료학회지
    • /
    • 제31권1호
    • /
    • pp.67-74
    • /
    • 2019
  • 목 적: 폐암 환자의 정위적 체부 방사선 치료를 시행하는 동안 발생할 수 있는 표적의 움직임을 치료 중 CBCT를 사용하여 표적의 위치 변화를 재보정함으로써 긴 치료 시간에 의해 발생하는 치료 중 자세 오차를 교정하는데 목적이 있다. 대상 및 방법: 본원에서 시행한 폐암 정위적 체부 방사선 치료 시 치료 계획상 치료 Arc가 2개로 구성된 환자 14명의 데이터를 후향적으로 분석하였다. 치료 중 CBCT를 사용하여 영상을 획득하여 발생한 치료 중 자세 변화(IntraFraction Motion; IFM)를 분석하고 발생한 오차만큼 Arccheck 팬텀에 역으로 오차를 만들어 선량 분석을 실시하였다. 결 과: 첫번째 치료 중 CBCT의 Translation(x, y, z) 방향의 평균, 표준편차 그리고 최대 오차 값은 x(LR) 축에서 $0.16{\pm}0.05cm$, 0.72 cm, y(SI) 축에서 $0.2{\pm}0.14cm$, 1.26 cm, z(AP) 축에서 $0.24{\pm}0.08cm$, 0.82 cm로 나타났다. Rotation(x, y, z) 방향은 x(pitch) 축에서 $0.84{\pm}0.23^{\circ}$, $2.8^{\circ}$, y(yaw) 축에서 $0.72{\pm}0.23^{\circ}$, $2.5^{\circ}$, z(roll) 축에서 $0.7{\pm}0.19^{\circ}$, $2^{\circ}$로 나타났다. 두번째 치료 중 CBCT의 Translation(x, y, z) 방향의 평균, 표준편차 그리고 최대 오차 값은 x(LR) 축에서 $0.1{\pm}0.04cm$, 0.37 cm, y(SI) 축에서 $0.14{\pm}0.17cm$, 2 cm, z(AP) 축에서 $0.12{\pm}0.04cm$, 0.5 cm로 나타났다. Rotation(x, y, z) 방향은 x(pitch) 축에서 $0.45{\pm}0.12^{\circ}$, $1.3^{\circ}$, y(yaw) 축에서 $0.37{\pm}0.1^{\circ}$, $1^{\circ}$, z(roll) 축에서 $0.35{\pm}0.1^{\circ}$, $1.2^{\circ}$로 나타났다. IFM 값만큼 오차를 적용한 선량 비교에서 점 선량 값은 평균 $5.2{\pm}4.2%$의 차이가 발생했으며 감마 값은 $82.64{\pm}10.51%$로 나타났다. 결 론: 정위적 방사선 치료를 시행하는 폐암 환자의 있어서 치료 시간이 길어짐에 따라 발생하는 치료 중 자세오차의 크기를 줄이기 위해 개별 Arc CBCT를 사용해 추가적 자세 오차 교정을 하는 것이 치료 정확성과 효율성을 높일 것으로 사료된다.

정상인의 견관절 운동범위 및 방사선 투시기를 이용한 운동분율측정 (Normal Range of Shoulder Motion and Fluoroscopic Analysis of Motion Fraction)

  • 최창혁;윤기현
    • Clinics in Shoulder and Elbow
    • /
    • 제1권2호
    • /
    • pp.221-229
    • /
    • 1998
  • 평균 나이 23세.의 건강한 남자 31명을 대상으로 하여 측각도계즐 이용한 견관절운동역을 측정한 결과 Dominant arm과 Non-dominant arm 모두에서 능동운동역에 비해 수동운동역이 증가되었고, 능동운동시 견갑외전, 중립신전, 수평신전, 수평굴곡, 그리고 중립 및 수평내회전에서, 수동운동의 격우에는 견갑외전, 수평굴곡, 그리고 중립 및 수평내회전에서 Non-dominant arm의 운동증가를 보였고, 수평외회전의 경우 Dominant arm의 운동증가소견을 보였다(p〈0.05) .또한 방사선투시기를 이용하여 관절와상완각과 견갑흉곽각의 비(θGH/θST)를 측정해 본 결과 첫째로 Dominant arm과 Non-dominant arm에서 모두 완전거상시 관절와상완각과 견값흥곽각의 비(θGH/θST)는 1.6이었으며 60도이상 150도 거상때까지 지속적으로 견값흉곽운동 분율이 커지는 양상이었다. 둘째천 30도에서 완전거상시까지 운동분율(θGH/θST)은 Dominant arm과 Non-domlnant arm에서 각각 1.2 및 1.3으로 나타났다. 견갑사위는 중립위에서 약 42도였고 거상에 따라 점차 작아졌으며 완전거상시에는 약 20도로 측정되었다. 이렇게 해서 얻어진 방사선조사 각도는 단순방사선 촬영에 적용하여, 견관절 질환 치료 후 운동범위의 회복의 경과를 판정하는데 도움을 줄 수 있을 것으로 생각되었다.

  • PDF

수직응고 시스템에서 밀도차와 냉각률이 열전달 및 열응력에 미치는 영향 (Effects of Density Change and Cooling Rate on Heat Transfer and Thermal Stress During Vertical Solidification Process)

  • 황기영;이진호
    • 대한기계학회논문집
    • /
    • 제19권4호
    • /
    • pp.1095-1101
    • /
    • 1995
  • Numerical analysis of vertical solidification process allowing solid-liquid density change is performed by a hybrid method between a winite volume method (FVM) and a finite element method (FEM). The investigation focuses on the influence of solid-liquid density change and cooling rates on the motion of solid-liquid interface, solidified mass fraction, temperatures and thermal stresses in the solid region. Due to the density change of pure aluminium, solid-liquid interface moves more slowly but the solidified mass fraction is larger. The cooling rate of the wall is shown to have a significant influence on the phase change heat transfer and thermal stresses, while the density change has a small influence on the motion of the interface, solidified mass fraction, temperature distributions and thermal stresses. As the cooling rate increases, the thermal stresses become higher at the early stage of a solidification process, but it has small influence on the final stresses as the steady state is reached.

Effect of Brownian Motion in Heat Transfer of H2O-Cu Nanofluid using LBM

  • Li, Kui-Ming;Lee, Yeon-Won
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제34권7호
    • /
    • pp.981-990
    • /
    • 2010
  • The main objective of this study is to investigate the fluid flow and the heat transfer characteristics of nanofluids using multi-phase thermal LBM and to realize theenhancement of heat transfer characteristics considered in the Brownian motion. In multi-phase, fluid component($H_2O$) is driven by Boussinesq approximation, and nanoparticles component by the external force gravity and buoyancy. The effect of Brownian motion as a random movement is modified to the internal velocity of nanoparticles(Cu). Simultaneously, the particles of both the phases assume the local equilibrium temperature after each collision. It has been observed that when simulating $H_2O$-Cu nanoparticles, the heat transfer is the highest, at the particle volume fraction 0.5% of the particle diameter 10 nm. The average Nusselt number is increased approximately by 33% at the particle volume fraction 0.5% of the particle diameter 10 nm when compared with pure water.

Time-domain analyses of the layered soil by the modified scaled boundary finite element method

  • Lu, Shan;Liu, Jun;Lin, Gao;Wang, Wenyuan
    • Structural Engineering and Mechanics
    • /
    • 제55권5호
    • /
    • pp.1055-1086
    • /
    • 2015
  • The dynamic response of two-dimensional unbounded domain on the rigid bedrock in the time domain is numerically obtained. It is realized by the modified scaled boundary finite element method (SBFEM) in which the original scaling center is replaced by a scaling line. The formulation bases on expanding dynamic stiffness by using the continued fraction approach. The solution converges rapidly over the whole time range along with the order of the continued fraction increases. In addition, the method is suitable for large scale systems. The numerical method is employed which is a combination of the time domain SBFEM for far field and the finite element method used for near field. By using the continued fraction solution and introducing auxiliary variables, the equation of motion of unbounded domain is built. Applying the spectral shifting technique, the virtual modes of motion equation are eliminated. Standard procedure in structural dynamic is directly applicable for time domain problem. Since the coefficient matrixes of equation are banded and symmetric, the equation can be solved efficiently by using the direct time domain integration method. Numerical examples demonstrate the increased robustness, accuracy and superiority of the proposed method. The suitability of proposed method for time domain simulations of complex systems is also demonstrated.

호흡 동조 췌장 암 용적 세기조절 회전 치료 시 Inter-fraction Intra-fraction 분석 (Analysis of inter-fraction and intra-fraction errors during volumetric modulated arc therapy in Pancreas Ca)

  • 조영필;서동린;홍택균;강태영;백금문;홍동기;윤인하;김진산
    • 대한방사선치료학회지
    • /
    • 제26권2호
    • /
    • pp.247-256
    • /
    • 2014
  • 목 적 : 췌장 환자 방사선 치료 중 기점(Fiducial) 대상 내부 및 외부 종양 움직임의 오차를 정량화 하고자 한다. 또한 cone beam computed tomography (CBCT) 를 기반으로 호흡 시 췌장의 움직임 분석하고자 한다. 대상 및 방법 : 용적 세기변조 회전조사 (V-MAT)를 적용, 정위적 방사선 치료를 국소 진행성 췌장암 환자 11명을 대상으로 하였다. CBCT 및 직교 투시이미지를 적용하여 기점(Fiducial Marker)의 Inter, intra-fraction 움직임 변화를 치료 전, 치료 진행 시 분석하였다. 결 과 : 치료 후 프로토콜을 오프라인 교정 프로토콜을 사용하여, CBCT 와 직교투시 간의 평균 오차(범위)는 0.0(-1.7~4.0), 0.3(-0.5~3.0) and 0.0(-4.1~6.6)mm 측방 (LR), 세로 (AP) 및 종 방향 (SI) 이였다. 무작위 Inter-fraction Setup 오차 결과는 -0.1, -2.3 and -1.1 mm: 95% Fiducial포함 마진은 각 9.9, 7.8, 12.5mm로 수식되었다. 결 론 : 위 분석으로 뼈 일치 정렬 후 잔류 불확실성이 있으며, SI 방향에 큰 임의의 움직임은 적합한 여백이 필요하다. 주변 내부 장기를 보호, 내부 장기 문제점을 최소화, 호흡편차를 고려, 치료 시 정기적으로 측정하여야 한다.

심근경색으로 좌심실 벽 운동장애를 가진 환자들에서 관상동맥 우회술 후 장기생존율 (Long-term Survival after CABG in Patients with Abnormal LV Wall Motion after MI)

  • 이미경;최순호;최종범
    • Journal of Chest Surgery
    • /
    • 제38권10호
    • /
    • pp.685-692
    • /
    • 2005
  • 배경: 좌심실 벽 운동장애는 관상동맥 우회술 후 장기생존율에 영향을 줄 수 있다. 이 연구는 심근경색증 후 발생한 좌심실 벽 운동장애가 관상동맥 우회술 후 장기생존율에 어떠한 영향을 주는가를 알아보았다. 대상 및 방법: 관상동맥 우회술 후 9년이 넘은 환자들 133예(남/여, 92/41)를 대상으로, 심근경색 후 좌심실 벽 운동장애가 있는 환자 56예(남/여 42/14, 평균연령 $59.2\pm9.2$세)와 좌심실 벽 운동장애가 없는 환자 77예(남/여 50/27,평균연령 $58.0\pm7.6$세)로 나누어 비교 분석하였다. 대부분의 환자들(l12/133, $84.2\%$)에서 체외순환 하에 좌측 속 가슴동맥과 하지 큰 두렁정맥을 이용하여 수술하였고 대동맥 차단 상태에서 근위연결 및 원위연결을 시행하는 방법으로 수술하였다. 걸과: 좌심실 벽 운동장애가 있는 환자들의 좌심실 구혈률은 평균 $48.7\pm13.2\%$로 좌심실 벽 운동장애가 없는 환자들(평균$57.1\pm10.1\%$)보다 감소되어 있었다(p=0.0001). 운동장애가 없는 환자군에서 평균 $135.1\pm18.0$개월의 추적으로 5년, 10년, 13년의 생존율은 각각 $85.7\pm4.0\%,\;76.2\;4.9\%,\;57.2\pm10.3\%$였고, 좌심실 운동장애가 있는 환자군에서 평균 $122.8\pm22.7$개월의 추적으로 5년, 10년, 13년의 생존율은 각각 $80.4\pm5.3\%,\;58.7\pm7.3\%,\;11.9\pm7.9\%$이었다(p=0.1). 심근경색에 의한 좌점실 벽 국소 운동장애가 있는 환자의 장기생존율에 영향을 미치는 인자는 좌심실 구혈률과 외래 치료였다. 다변량 분석에서 좌심실 벽 운동장애가 있는 환자군의 장기생존율은 외래 치료를 한 환자에서 우수하였고 좌심실 벽 운동장애가 없는 군의 장기생존율은 여성에서 우수하였다. 결론: 심근경색 후 좌심실 벽의 운동장애가 있는 경우 장기 생존율은 운동장애가 없는 경우보다 떨어지는 경향을 보이며, 그런 환자들에서 수술 후 외래 치료가 장기 생존에 매우 중요하다고 생각한다.

사각형 탱크 내에서의 2차원 슬로싱에 대한 전산유체 역학적 연구 (Computational Fluid Dynamics Study on Two-Dimensional Sloshing in Rectangular Tank)

  • 곽영균;고성호
    • 대한기계학회논문집B
    • /
    • 제27권8호
    • /
    • pp.1142-1149
    • /
    • 2003
  • The present study describes a numerical analysis for simulation of the sloshing of flows with free-surface which contained in a rectangular tank moving in harmonic or pitching motion. The VOF function, representing the volume fraction of a cell occupied by the fluid, is calculated for each cells, which gives the location of the free-surface filling any some fraction of cells with fluid. The time-dependent changes of free-surface height are used for visualization subject to several conditions such as fluid height, horizontal acceleration, sinusoidal motion, and viscosity. The free-surface heights were used for comparing wall-force, which is caused by sloshing of flows. Damping effects by baffles were extensively investigated for various conditions in terms of baffle shape and position.

정적연소기내 유동형태가 화염전파에 미치는 영향 연구 (An Experimental Study of the Effect of Flow on Flame Propagation in a Constant-Volume Combustion Chamber)

  • 정동수;오승묵;서승우;장영준
    • 한국자동차공학회논문집
    • /
    • 제3권2호
    • /
    • pp.136-145
    • /
    • 1995
  • The aim of this study is to gain a better understanding of the effect of a flow motion on the flame development by means of an optically-accessible constant-volume combustion chamber and the visualization technique of a combustion flame. At first, the characteristics of a flame propagation are investigated in the combustion field of the two kinds of flow conditions such as a quiescent and a flowing condition, and methane-air mixture is used as fuel. Then the same investigation is performed in two flow configurations : bulk flow motion type and turbulence generating type. In this study, the combustion phenomena are analyzed by measuring the combustion pressure, flame propagation speed, mean velocity, turbulent intensity, and mass fraction burned.

  • PDF