• 한국재료학회지
• /
• 제11권10호
• /
• pp.841-845
• /
• 2001

The steam generator tubes of power plant damaged by sliding wear due to flow-induced motion of foreign object. Amount of wear have been predicted by Achard's wear equation until now. However, there are large error and low reliability, because this equation regards wear coefficient(k) as constant. The sliding wears tests have been performed at room temperature to examine parameters of wear (wear distance, contact stress). The steam generator tube material for wear test is used Inconel 600 and foreign object material is used 304 austenite stainless steel. The sliding wear tests show that the amount of wear is not linearly proportional to the wear distance(for 374 austenite stainless steel). According to experimental result, wear coefficient is not constant k but function k(s) of wear distance. The newly modified wear predictive equation V=k(s)F have small error and high reliability.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.157-167
• /
• 2007

The purpose of this study was to analyze kinematic techniques in the woman's 100m hurdle. In order to find the kinematic parameters, a 3-D video system for kinematic analysis-kwon3d 3.1(Kwon3D Motion Analysis Program Version 3.1)-was used. Eight JVC video cameras(GR-HD1KR) were used to film the performance of Lee Yeon-Kyoung at a frame rate of 60fields/s. The kinematic characteristics from the first hurdle to last hurdle were analyzed at the clearing hurdle spots such as distance, velocities, heights and angles. The real-life three-dimensional coordinates of 20 body landmarks during each phases were collected using a Direct Linear Transformation procedure. After analyzing the kinematic variables in the 100m hurdle run, the following conclusion were obtained; Lee Yeon-Kyoung had to maintain constant stride lengths between hurdles and increase takeoff distance before clearance and shorter landing distance after clearance. She also had to hit the correct takeoff point in front of the hurdle and extend the lead leg at the moment of landing in order to minimize the loss of velocity. She had to sprint between hurdles as fast as possible over 8m/s and run powerful first stride and shortened third stride preparing for the following hurdle clearances.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.19-26
• /
• 2001

The wear characteristic of Zircaloy-4 tube, which is used for a cladding of light water reactor fuel rod, is investigated experimentally. The experiment is conducted with contacting the crossed tube specimens in air as well as in water at room temperature with various combination of contact normal force and sliding distance of reciprocating motion. The contour and the volume of each wear are examined to study the effect of contact condition and environment on wear. As a result, it is found that the wear volume in the water environment is larger than that in the air for all the contact (i.e., force and sliding distance) conditions. However, the wear depth is greater in air than in water if the contact normal force and the sliding distance are larger. These are explained by the ease of detachment of wear particles from the contact surface. On the other hand, workrate model is applied with the contact shear force range measured by our wear tester. Investigated is the correlation between the workrate and the wear volume increase rate of the present experiment. The parabolic curve is found to fit well for the present wear data.

• 한국운동역학회지
• /
• 제31권3호
• /
• pp.199-204
• /
• 2021

Objective: The purpose of this study was to present a new idea of methodology to evaluate Poomsae performance using inertial measurement unit (IMU) sensors in terms of signal processing techniques. Method: Ten collegian Taekwondo athletes, consisting of five Poomsae elite athletes (age: 21.4 ± 0.9 years, height: 168.4 ± 11.3 cm, weight: 65.0 ± 10.6 kg, experience: 12 ± 0.7 years) and five breaking demonstration athletes (age: 21.0 ± 0.0 years, height: 168.4 ± 4.7 cm, weight: 63.8 ± 8.2 kg, experience: 13.0 ± 2.1 years), voluntarily participated in this study. They performed three different black belt Poomsae such as Goryeo, Geumgang, and Taebaek Poomsae repeatedly twice. Repeated measured motion data on the wrist and ankle were calculated by the methods of cosine similarity and Euclidean distance. Results: The Poomsse athletes showed superior performance in terms of temporal consistency at Goryeo and Taebaek Poomsae, cosine similarity at Geumgang and Taebaek Poomsae, and Euclidian distance at Geumgang Poomsae. Conclusion: IMU sensor would be a useful tool for monitoring and evaluating within-subject temporal variability of Taekwondo Poomsae motions. As well it distinguished spatiotemporal characteristics among three different Poomsae.

• 수산해양기술연구
• /
• 제28권1호
• /
• pp.10-20
• /
• 1992

The new course distances of a ship are considered to be the indices to indicate directly her abilities of course altercation. Generally, they have long been calculated by using the maneuvering indices obtained from her Z test. However, at sea actually the maneuvering indices can not sometimes be obtained according to ship's condition or circumstances and the new course distances can not be calculated. To find out other method to calculate the new course distances, in this paper the author analyzed them from a viewpoint of ship motion, and worked out a numerical formula to calculate them easily, using the data of ship's heading test. In order to check whether the presented method is applicable to actual ships or not, the experiment by them were also performed. The results obtained are summarized as follow: 1. The mean difference of the distance between two new course distances by the heading test and the maneuvering indices of the experimental ship was about 0.98% values of the ones by the maneuvering indices, when her heading were 10。, 20。 and 30。, using the rudder angle of 15。. These new course distances were therefore found to be almost same in values of the distance. 2. The mean difference of the distance between two new course distances by the heading test and the observation of experimental ship was about 1.16% values of the ones by the observation, when her headings were 10。, 20。 and 30。, using the rudder angle of 15。. These new course distances were therefore found to be almost same in values of the distance. 3. It is confirmed that the new course distances can be calculated easily by using the method of ship's simple heading test, without the observation or using the maneuvering indices. 4. It is considered to be helpful for the safety of shiphanding to draw curves of new course distances by ship's heading test and utilize them at sea.

• 전자공학회논문지CI
• /
• 제37권6호
• /
• pp.10-21
• /
• 2000

거리 변환(Distance Transform)을 수행할 수 있는 셀룰라 비선형 네트워크 구조와 특징 점들의 제적 상에서 거리 변환을 이용한 optical flow 검출 방법을 제안하였다. 움직이는 물체의 추적이나 카메라의 움직임 파악 같은 응용 분야에서는 수가 적더라도 정확하고 확실한 optical flow가 더 중요하다. 본 연구는 특징점들의 이동 궤적 상에서 거리 변환 기법을 이용하여 거리 변환 필드(Distance Transform Field)를 생성시키고 거리 변환 필드상에서 궤적의 움직인 거리 값과 방향을 추출함으로써 optical flow를 구하는 방법이다. 이 방법은 영상 정보를 거리 정보로 변환하여 사용하게 되므로 잡음의 영향을 적게 받으며 필요한 연산들이 아날로그 회로에 의해 처리되므로 처리 속도가 빠르고, 지역적 처리 특성을 갖기 때문에 하드웨어 구현이 용이하다는 특징이 있다. 또한, 본 연구에서는 제안한 알고리즘의 핵심부분을 하드웨어로 구현하기 위해 셀룰라 비선형 네트워크(Celluar Nonlinear Neural Network)구조를 제안하였다. 제안한 구조와 알고리즘을 검증하기 위해 다양한 영상과 환경에 대한 시뮬레이션을 수행하여 결과를 제시하였다.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.83-98
• /
• 2004

The purpose of this study was to determine the kinematic variables of the hurdling for a korea record holder (A) and a national hurdle representative (B). after the kinematic variables such the distance and the distance and height of C.G, the velocity and the angle were analyzed about the hurdling. The results were summarized as follows; 1. In terms of the distance and the height of C.G, subject A showed long in horizontal distance from C.G to the take-off phase, but showed short in the landing phase. Subject B showed short in horizontal distance from C.G to the take-off phase, and showed long in the landing phase. 2. In terms of the velocity of C.G, Subject A showed fast C.G velocity in horizontal direction to the braking phase, Subject A and B showed slower C.G velority in the landing phase, but Subject A showed height C.G velocity in vertical direction to the to the take-off, the landing, and propulsion phase 3. In terms of the angle of C.G and lean of C.G to front at the braking and the take-off phase. Subject A kept the less angle in the maximum trunk lean to front at the flight phase as comparison with Subject B. 4. In terms of the velocity of the knee and the ankle joint. Subject A showed fast in the resultant velocity of the left ankle joint the take-off phase, but showed slow in the left knee joint. Subject B showed fast in the resultant velocity of the left knee joint the take-off phase, but showed slow in the right knee and the right ankle joint.

• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.1-8
• /
• 2021

본 연구에서는 골프 드라이버 스윙 시 운동역학적 변인들이 비거리와 어떠한 관련성이 있는지를 분석하는 것이 목적이었다. 연구대상자는 신체 건강한 15명의 KPGA 골프 선수들이 참여하였다. 8대의 VICON 모션 캡쳐 카메라(250 Hz), 2대의 지면반력기(1000 Hz), 그리고 Trackman을 이용하여 운동학적 및 운동역학적 자료를 수집하였으며, 통계 분석은 Pearson 상관관계를 실시하였다. 드라이버 비거리와 볼 스피드, 클럽 헤드 스피드, 엑스 펙터, 그리고 지면반력 간 유의한 상관관계가 나타났으나, 스매쉬 팩터와 무릎 토크는 비거리와 상관관계가 나타나지 않았다. 볼 스피드, 클럽 헤드 스피드, 엑스 펙터, 지면반력은 비거리에 영향을 미치는 것으로 나타났으나, 스매쉬 팩터와 무릎 토크는 비거리에 영향을 미치지 않는 것으로 나타났다.

• Journal of Photoscience
• /
• 제3권3호
• /
• pp.147-151
• /
• 1996

Dynamics of contact ion-pair between 1, 2, 4, 5-tetracyanobenzene anion and cation of biphenyl derivatives was investigated on the picosecond time scale. Solvent effect on the electron transfer was observed and electron transfer rates were examined using Marcus equation which contains distance dependence of the electron transfer rate in the frequency factor, along with the consideration of molecular shape. From the discussion based on disk model for molecular shape, contribution of interring torsional motion of biphenyl to the inner-sphere reorganization energy is strongly suggested, which leads to the physical explanation for the observed solvent effect on the rate of electron transfer.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1014-1020
• /
• 1990

Iterative algorithms for detecting the collision of convex objects whose motion is characterized by a path in configuration space are described. They use as an essential substep the computation of the distance between the two objects. When the objects are polytopes in either two or three dimensional space, an algorithm is given which terminates in a finite number of iterations. It determines either that no collision occurs or the first collision point on the path. Extensive numerical experiments for practical problems show that the computational time is short and grows only linearly in the total number of vertices of the two polytopes.