• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.11-15
• /
• 2002

This paper presents the thermal characteristic analysis of a high-speed HMC with spindle speed of 50,000rpm. The spindle is supported by two radial and axial magnetic bearings. and the built-in motor is located between the axial and rear radial magnetic bearings. The X-axis and Y-axis feeding systems are composed of linear motor and linear motion guides, and the Z-axis feeding system is composed of servo-motor, ballscrew and linear motion guide. The thermal analysis model of high-speed HMC is constructed by the finite element method, and the thermal characteristics in the design stage are estimated based on the temperature distribution and thermal deformation under the conditions related to the heat generation of built-in motor, magnetic bearings, linear motors, servo-motor, ballscrew, and so on.

• 대한전자공학회논문지SP
• /
• 제43권1호
• /
• pp.75-84
• /
• 2006

NTSS 알고리즘 (New Three-Step Search Algorithm)은 대표적인 고속 블록 정합 알고리즘(Block Matching Algorithm: BMA)의 하나인 TSS 알고리즘 (Three-Step Search Algorithm)에 동영상이 갖는 중앙 편향적(Center-Biased) 특성을 반영한 방법이다. 그러나 NTSS는 움직임이 작은 동영상인 경우에는 TSS보다 개선된 성능을 보여주지만, 움직임이 큰 동영상에 대해서는 TSS와 큰 차이가 없으며, 탐색범위가 커질수록 오히려 성능이 떨어지는 단점이 있다 본 논문에서는 움직임 벡터의 특성에 따라 적응적으로 탐색범위를 결정하여 탐색범위의 증가로 발생되는 NTSS의 단점을 보완함으로써 움직임이 큰 동영상에 대해서도 향상된 성능을 갖는 방법을 제안한다. 제안한 방법을 적용하였을 때 움직임이 작은 동영상에서는 기존 NTSS 방법과 동일한 화질을 유지하면서 움직임이 큰 동영상에서는 최대 0.5dB 이상 성능이 개선되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.507-512
• /
• 1993

In this paper we discuss the nonlinear motion of a conservative two-link arm using first integrals, which includes one integral constant. In the analysis of the motion, the constant plays important role. First, we give some discussion on the free motion by focusing on the integral constant. As the result, the free motion can be classified into two types-the one is oscillation and the other is rotation. Second, we discuss the forced motion of the arm actuated only at the second joint. We take the first integral in a more general form, and show that the forced motion of the second link can be expressed as a variation of the integral constant. Also, the characteristic of the forced motion actuated by arbitrary constant torques is discussed.

• 한국CDE학회논문집
• /
• 제19권1호
• /
• pp.68-79
• /
• 2014

Human model simulation has been widely used in various industrial areas such as ergonomic design, product evaluation and characteristic analysis of work-related musculoskeletal disorders. However, the process of building digital human models and capturing their behaviors requires many costly and time-consuming fabrication iterations. To overcome the limitations of this expensive and time-consuming process, many studies have recently presented a markerless motion capture approach that reconstructs the time-varying skeletal motions from optical devices. However, the drawback of the markerless motion capture approach is that the phenomenon of occlusion of motion data occurs in real-time human simulation. In this study, we propose a systematic method of discriminating missing or inaccurate motion data due to motion occlusion and interpolating a sequence of motion frames captured by a markerless depth camera.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.681-684
• /
• 2008

Motion interpolation is adopted and has been spread widely into market since it is effective in reducing motion blur, which is considered as weak characteristic due to slow response time of liquid crystal and hold-type display. 120Hz driving using interpolated frames achieves better moving picture quality with less motion blur and less motion judder. However, errors in the interpolated frames can cause visual artifacts such as static text breakup, halos, and occlusions. This paper focuses on categorizing characteristics of visual artifacts and on reducing side-effects by using information from original frames in special cases.

• 한국인터넷방송통신학회논문지
• /
• 제14권2호
• /
• pp.135-140
• /
• 2014

본 논문은 광마우스의 패턴 잡음에 대한 움직임 벡터 값에 대해서 디지털 필터링을 통하여 특성 개선 내용을 기술한다. 설계된 회로는 PS2나 USB로 출력되기 전에 x축과 y축 움직임 벡터에 대해 필터링과 평균값을 취하여, 광마우스의 이동을 부드럽게 하고 떨림 현상을 개선하였다. FPGA를 이용해서 각각의 기능을 검증하고 $0.35{\mu}m$ 표준 CMOS 공정을 이용하여 칩으로 제작해서 성능을 측정하였다. 시스템 클럭 주파수는 6MHz를 사용하여 1/1700sec 마다 +6에서 -6사이의 움직임 벡터 값을 출력한다. 테스트는 카테시안 로봇을 이용하여 특성에 대한 측정을 실시하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 춘계학술대회
• /
• pp.41-42
• /
• 2018

이 연구는 선박의 내항성능 평가 요소로 사용되는 횡동요 운동특성의 예측에 관한 연구로, 운항중인 선박의 횡동요 RAO를 실시간으로 도출하기 위하여 기계학습 기반의 근사모델을 사용하였다. 근사모델에 의한 예측결과를 테스트데이터와 비교분석함으로서, 횡동요 운동 특성 예측에 적합한 근사모델을 생성하기 위한 근사기법과 데이터 샘플링 조건에 대하여 제시하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.691-694
• /
• 2000

In this paper, a motion control algorithm is proposed by using neural network system, which makes a robot arm successfully avoid unexpected obstacle when the robot is moving from the start to the goal position. During the motion, if there is an obstacle the vision system recognizes it. And in every time the optimization-algorithm quickly chooses a motion among the possible motions of robot. The proposed algorithm has a good avoidance characteristic in simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.323-327
• /
• 2002

In order to control the railway noise, the radiation characteristic of the noise during the train passage should be analyzed. Generally, the major noise sources for Korean Train Express are the rolling noise and power unit noise up to 300km/h. In this paper, we describe on a train model that is considered to be a row of point sources to calculate the radiation characteristic. The calculation results are compared with short distance measurement. It is shown that the radiation characteristic of the rolling noise is dipole type. The noise generated by the power unit is radiated as the cosine type. The noise level at an observer is increased in the direction of motion and reduced in the direction opposite to the motion with increasing of the train speed. The calculation results including the moving effect of the noise source at 300km/h show in good agreement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.288-297
• /
• 1994

The sewing machine is one of the oldest machine that has ever used, which is related with clothes' life. Modern sewing machines are divided into three groups by the sititch character, which are the lock stitch sewing machine group, the over lock sewing machine group and the specical sewing machine group. The lock stitch sewing machine have being used more than any others, which is also good model to study. This work is part of the improvement of an industrial lock stitch(ILS) sewing machine's design. The research objectives are the kinematic analysis and evaluations of stitch performance. The feed dog and the needle extreme's motion, which are important two part's motion in the sewing machine, are characterized by the stitch process and the needle trace. The needle trace is formulated as the stitch spacing, the stitch spacing's ratio(the static characteristic), and the stitch's phase difference(the dynamic characteristic). The tested ILS sewing machine is evaluated as a good static characteristic and a bad dynamic characteristic. Namely, a stitch spacing's ratio is 0.01~0.063(mm/mm) and a stitch's phase difference ratio is 0.06~0.13(mm/mm).