• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.589-600
• /
• 2022

Investigations on the molten-pool sloshing behavior are of essential value for improving nuclear safety evaluation of Core Disruptive Accidents (CDA) that would be possibly encountered for Sodium-cooled Fast Reactors (SFR). This paper is aimed at synthesizing the knowledge from our recent studies on molten-pool sloshing behavior with solid particles conducted at the Sun Yat-sen University. To better visualize and clarify the mechanism and characteristics of sloshing induced by local Fuel-Coolant Interaction (FCI), experiments were performed with various parameters by injecting nitrogen gas into a 2-dimensional liquid pool with accumulated solid particles. It was confirmed that under different particle-bed conditions, three representative flow regimes (i.e. the bubble-impulsion dominant, transitional and bed-inertia dominant regimes) are identifiable. Aimed at predicting the regime transitions during sloshing process, a predictive empirical model along with a regime map was proposed on the basis of experiments using single-sized spherical solid particles, and then was extended for covering more complex particle conditions (e.g. non-spherical, mixed-sized and mixed-density spherical particle conditions). To obtain more comprehensive understandings and verify the applicability and reliability of the predictive model under more realistic conditions (e.g. large-scale 3-dimensional condition), further experimental and modeling studies are also being prepared under other more complicated actual conditions.

• 한국방사선학회논문지
• /
• 제16권7호
• /
• pp.879-887
• /
• 2022

본 연구에서는 체압 측정형 침대의 기계식 순차 상승 방식이 실제로 척추의 부분별 분절운동을 유도하는지 확인하고자 하였다. 이를 위해 측면 X-선 검사를 하여 순차적 압력을 주는 장치가 척추의 각 부분에 기계적 수직 상승을 주어 척추의 계단식 분절을 유도함을 확인하였다. 이후 요통을 인지하고 있는 대상자에게 통증, 보행 능력, 우울 척도를 측정하고 분석하였다. 10일 동안의 시각적 상사 척도(p<0.05), 요통 장애지수(p<0.05)는 침대 사용 후 평균이 감소하는 경향을 보였다. 보행 능력 검사(p<0.05)에서는 침대 사용 횟수가 증가함에 따라 검사에서의 이동 시간이 감소하였으며 이동 거리는 증가하였다. 또한, 침대 사용 후 노인 우울 척도(p<0.05)가 감소함을 나타냈다. 그 결과, 침대가 제공하는 온열과 지압으로 인한 척추의 분절은 통증의 완화와 더불어 보행과 우울감에도 영향을 미치는 것을 확인하였다.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1022-1030
• /
• 1999

A numerical study was carried out to analyze the effect of flow distribution of stirred part and plug flow part on combustion efficiency at the coal gasification process in an entrained bed coal reactor. The model of computation was based on gas phase eulerian balance equations of mass and momentum. The solid phase was described by lagrangian equations of motion. The $k-{\varepsilon}$ model was used to calculate the turbulence flow and eddy dissipation model was used to describe the gas phase reaction rate. The radiation was solved using a Monte-Carlo method. One-step parallel two reaction model was employed for the devolatilization process of a high volatile bituminous Kideco coal. The computations agreed well with the experiments, but the flame front was closer to the burner than the measured one. The flow distribution of a stirred part and a plug flow part in a reactor was a function of the magnitude of recirculation zone resulted from the swirl. The combustion efficiency was enhanced with decreasing stirred part and the maximum value was found around S=1.2, having the minimum stirred part. The combustion efficiency resulted from not only the flow distribution but also the particle residence time through the hot reaction zone of the stirred part, in particular for the weak swirl without IRZ(internal recirculation zone) and the long lifted flame.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1008-1013
• /
• 2003

This paper concerns the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system consisted of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.896-903
• /
• 2004

This paper proposes the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high-precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system composed of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.

• 로봇학회논문지
• /
• 제15권3호
• /
• pp.269-276
• /
• 2020

As we become an aging society, the number of elderly patients continues to increase. Pressure sores that can easily occur in patients with trauma cause serious socio-economic problems. In general, prevention of bedsores through predicting the patient's posture is being developed. Developed method usually use artificial intelligence techniques to estimate the patient's posture by measured pressure images in the mattress. In this method, it has a problem the reduction of estimation accuracy when posture of patient is changed. Therefore, it is necessary to use the filter of pressure images in the position transition of patient. In this paper, we propose an algorithm to predict the patient's posture, and an algorithm to reduce the ambiguity that can occur in the patient's posture transition section. By obtaining stable data through this algorithm, learning/prediction stability of the neural network can be expected, and prediction performance is improved accordingly. Through experiments, the effectiveness of the algorithm was verified.

• 해양환경안전학회지
• /
• 제11권2호
• /
• pp.77-82
• /
• 2005

지금까지 국내에서 제작된 요트는 선체의 재질이 FRP로 제작되어 왔으나 FRP는 환경오염 및 해양안전에 관한 법규 규제가 강화되고 있는 국제사회의 인식에 따라 중소형 조선소를 중심으로 강철 재료나 알루미늄 재료들 사용한 선박건조로 변화하고 있는 실정이다. 강선요트의 구조상 강선재료를 주로 사용함으로서 여러 가지 강도적인 측면에 대한 검토가 필요하지만, 소형선박이므로 종강도, 횡강도 부분은 규정에서의 허용 응력치에 안전율(Safe Factor)만을 주어서 설계를 하여도 충분히 안정된 구조를 이를 수가 있다. 그러나, 소형선박에서 가장 문제시되는 것은 국부강도(Local Strength)의 평가이다. 본 구조해석에서는 선수에 작용하는 슬래밍 동작하중 및 선수충격에 의한 선수부의 손상 여부와 선수부의 국부강도 만족 여부를 확인하고, 기관받침(Engine bed) 부분에서의 중량하중과 횡파하중에 대한 검토를 수행하였다.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.925-936
• /
• 2020

To ascertain the characteristics of pool sloshing behavior that might be encountered during a core disruptive accident of sodium-cooled fast reactors, in our earlier work several series of experiments were conducted under various scenarios including the condition with mono-sized solid particles. It is found that under the particle-bed condition, three typical flow regimes (namely the bubble-impulsion dominant regime, the transitional regime and the bed-inertia dominant regime) could be identified and a flow-regime model (base model) has been even successfully established to estimate the regime transition. In this study, aimed to further understand this behavior at more realistic particle-bed conditions, a series of simulated experiments is newly carried out using mixed-size particles. Through analyses, it is verified that for present scenario, by applying the area mean diameter, our previously-developed base model can provide the most appropriate predictive results among the various effective diameters. To predict the regime transition with a form of extension scheme, a correction factor which is based on the volume-mean diameter and the degree of convergence in particle-size distribution is suggested and validated. The conducted analyses in this work also indicate that under certain conditions, the potential separation between different particle components might exist during the sloshing process.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.183-191
• /
• 2002

해수교환이 우수하고, 조차에 따라 상·하로 자유롭게 운동하며, 연약지반과 대수심역에도 설치될 수 있다는 것을 일반적인 부방파제의 주요한 특징으로 들 수 있다. 본 연구는 말뚝계류된 부방파제에 의한 3차원파랑제어와 동적인 거동을 경계적분법과 고유함수전개법을 병용하는 수치해석법으로부터 논의한다. 여기서, 말뚝계류시스템은 연직운동만이 허용되고 다른 운동성분들은 모두 구속되며, 체인계류시스템보다도 파랑에너지의 흡수가 많은 것으로 알려져 있다. 본 연구에서는 말뚝계류에 있어서 말뚝과 본체인 폰툰과의 사이에 작용하는 마찰력과 같은 저항력은 고려되지 않는다. 수치해석결과에 따르면 부방파제의 홀수와 폭의 변화는 파랑제어에 큰 영향을 미치고, 입사파의 주기가 길면 부방파제를 통한 전달파가 크다는 것을 알 수 있다. 그리고, 부방파제의 연직운동은 단주기파에서 크게 나타난다.

• 한국지진공학회논문집
• /
• 제15권1호
• /
• pp.57-63
• /
• 2011

본 연구에서는 중저준위 방사성 폐기물 처분장의 지진위험도 평가를 위한 평가용 입력지반운동을 도출하였다. 방사성 폐기물 처분장 부지를 대상으로 한 지진재해도 평가를 수행하여 재해도 곡선을 도출하였으며 도출된 재해도 곡선을 바탕으로 등재해도 스펙트럼을 산정하였다. 등재해도 스펙트럼에 부합하는 30개의 인공지진파를 생성하여 해당 부지의 지반을 대상으로 한 부지응답해석을 수행하였다. 대상부지에 대한 부지응답해석을 통하여 지표면과 처분동굴의 상단과 하단부에서의 입력지진운동을 구하였고 각각의 평균값을 구하여 방사성 폐기물 처분장의 리스크 평가를 위한 평가용 응답스펙트럼을 제시하였다.