• Journal of the Korean Geotechnical Society
• /
• v.34 no.1
• /
• pp.5-16
• /
• 2018

In this study, seismic performance of geotechnical seismic isolation system capable of primary seismic isolation in the ground was evaluated. 1-G shaking table test was used to assess the performance of Teflon or steel slag as geotechnical seismic isolation systems installed beneath superstructure foundation. Response acceleration and response spectra were analyzed considering different input motions. The results were compared with those of fixed foundation structure without seismic isolation system. The steel slag-type seismic isolation system showed significant reduction in acceleration. The teflon-type seismic isolation system did not show significant effects on acceleration reduction in low-to-moderate seismicity condition, but it did show better effects in case of strong seismic condition. As input motion was transferred to the upper mass, the response spectrum of the fixed foundation structure was amplified in the short period range. In contrast, the response spectrum of the structure with seismic isolation using teflon or steel slag amplified in the long period range. It is found that the change of periodicity and the friction characteristics between isolation materials and foundations affected acceleration reduction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.162-163
• /
• 2018

This study introduces the R&D project of development of the 1st LNG bunkering barge in Korea. The Design and pilot test of Barge-To-Ship 500cbm LNG bunkering barge system for coastal trading LNG-fueled ship is proposed. The following technologies will be developed from the project ; Basic/Detail design and pilot test of LNG Bunkering barge system, Basic/Detail design and pilot test of LNG bunkering process system considering LNG loading/unloading, Basic/Detail design and pilot test of 500cbm LNG tank in type-C, Evaluation of bunkering performance according to conditions (environment, SIMOPs) by numerical simulation, Performance evaluation of bunkering barge, towed barge and Barge-To-Ship motion considering ocean environment load, and scenario in Barge-To-Ship LNG bunkering. This project will contribute expansion to LNG-fueled ship industry and pave the way to establish LNG bunkering hub port.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.563-572
• /
• 1997

E-mail has been eidely used for unformation delivery as an Inernet serive. As multimedia etchnologies are developed rapidly, most of the recent Unternet infornation servies support multimedia data. E-mail system also needs to suport multimedia nesage. But Internet mail servise using simple maiol transfer protocol(SMTP) speci-fied in RFC 821/822 handles only ASCII text messages repressented with 7-bit code. Each line the message has the length limitation as well. Those are why it cannot satisfy the diverse user'w demands. Multipuepose Unternet mail extensions(MIMZE), which is a modification and supplement of RFC 822,was proposed for supporting transportation of multimedia data.It can solve the limitations of sizes and types in contents of a message. In this study the E-mail system has been designed and implemented according to the MIME standard in order to solve the limitations of transpotation of messages regardless of the message content type. Hypertext markup language(HTML)syntax is applied to the mail system, and so it is possible to display a message consisting of differnt media as an intergrated from for the purpose of better understanding a message. No application program is needed for displaying a message including image data,and convenience for user is considered in the system. The futuer work is to improve the E-mail system so that it may support motion pictures and sound information,Thereby tge perfor multimeda E-mail system providing inergrated user's wiew will be developed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6B
• /
• pp.930-939
• /
• 2010

Recently, many researches for making more comfortable input device based on gaze detection have been vigorously performed in human computer interaction. However, these previous researches are difficult to be used in IPTV environment because these methods need additional wearing devices or do not work at a distance. To overcome these problems, we propose a new way of controlling IPTV interface by using a detected face and eye positions in single static camera. And although face or eyes are not detected successfully by using Adaboost algorithm, we can control IPTV interface by using motion vectors calculated by pyramidal KLT (Kanade-Lucas-Tomasi) feature tracker. These are two novelties of our research compared to previous works. This research has following advantages. Different from previous research, the proposed method can be used at a distance about 2m. Since the proposed method does not require a user to wear additional equipments, there is no limitation of face movement and it has high convenience. Experimental results showed that the proposed method could be operated at real-time speed of 15 frames per second. Wd confirmed that the previous input device could be sufficiently replaced by the proposed method.

• Journal of the Korean Chemical Society
• /
• v.62 no.4
• /
• pp.288-298
• /
• 2018

In this study, we surveyed pre- and post-perceptions of fourteen science teachers related to the atmosphere composition of molecules with different masses by the developed test. As a result of the test, the teachers were classified into two types of thoughts; One of them is considered the atmosphere to be a homogeneous solution, and the other is a thought that the composition ratio of the atmosphere was not homogeneous considering the different weights of particles. The two types were reclassified into three categories; one of them is considering large gravity effect, another is considering small gravity effect, and the other is considering medium scale gravity effect. Total six types of thoughts were found from the pre-test. After introducing crosscutting concepts which are related to the composition of atmosphere. The teachers discussed the phenomena with the molecular motion by weights of atoms and temperature, the homogeneity of the solution of air in chemistry domain. They also discussed with the relationship between mass and gravity and distance in physics domain. And the discussion included distribution of the atmosphere, convection phenomena, etc. After the discussion, the teachers changed their pre-conceptions to post-concoctions considering combined perspectives of gravity, mass, temperature, altitude etc. Through these changes, we are able to confirm the importance of crosscutting concepts covered in various disciplines. In the integrated science, we should help teachers to provide students with these types of thinking in order to form a coherent world-view and to carry out inquiry thinking as an intellectual tool.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.500-509
• /
• 2013

This study reports a numerical analysis of the internal flow characteristics of the integrated urea-SCR muffler system with the various geometries of the multi-perforated tube which is set up between the muffler inlet and in front of SCR catalysts. The multi-perforated tube is generally used to disperse uniformly the urea-water solution spray and to make better use of the SCR catalyst, resulting in the increased $NO_x$ reduction and decreased ammonia slip. The effects of the multi-perforated tube orifice area ratios on the velocity distributions in front of the SCR catalyst, which is ultimately quantified as the uniformity index, were investigated for the optimal muffler system design. The steady flow model was applied by using a general-purpose commercial software package. The air at the room temperature was used as a working fluid, instead of the exhaust gas and urea-water solution spray mixture. From the analysis results, it was clarified that the multi-perforated tube geometry sensitively affected to the formation of the bulk swirling motion inside the plenum chamber set in front of the SCR catalyst and to the uniformity index of the velocity distribution produced at the inlet of the catalyst.

• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.40-46
• /
• 2006

Hepatoma is one of 3 most common malignancies in Korea, the survival rate is not improved since last decades because of delayed diagnosis and limited treatment conditions. Radiation was one of treatment options but the impact on the survival is not remarkable. High dose exposure to target area was suggested for improved effect but low tolerance dose of normal liver tissue is the main limited factor. IMRT is the advanced form of 3DCRT, for focusing high dose on target with minimal dose to surrounding normal tissues. Motion of the tumor by respiration, cardiac pulsation and peristalsis is the main treatment harrier of IMRT for treatment of hepatoma patients. Development of QA technique for acceptable geometrical uncertainties and dose error on target volume is essential for IMRT in clinical treatment but proper QA technique is not yet developed. This study compared the verification film dosimetry with measured dose in phantom and calculated dose in planning computer on exactly same conditions of patient treatments. Within 3% dose differences between 3 groups were confirmed. We suggest that our verification QA technique is easy, economic, iterative and acceptable in clinical application for advanced hepatoma patients.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1131-1136
• /
• 2015

In a diesel engine, the wear of the cylinder liner occurs because of the continuous reciprocating motion of the piston ring. This wear reduces the performance of the diesel engine and shortens its service life. This study evaluated the wear characteristics of GT metal and a conventional metal used for cylinder liners using a ship's diesel engine. Wear tests were performed at temperatures of $25^{\circ}C$, $175^{\circ}C$, and $325^{\circ}C$, and under loads of 10 N, 30 N, and 50 N. The amount of wear, specific wear rate, and friction coefficient were evaluated for each condition. To analyze the wear mechanism, observations were made on an SEM. In the case of both metals, abrasive and adhesion wear occurred on the wear surfaces at room temperature, and corrosion wear was observed at high temperatures. The amount of wear and the specific wear rate of the GT metal were lower than those of the conventional metal at all temperatures, and hence it can be concluded that the wear characteristics of the GT metal are much better.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.137-147
• /
• 2008

Fault rupture directivity of the Odaesan earthquake, which was inferred to be the main cause of the high PGAvalue (> 0.1 g) unusually observed at the near-source region, was analyzed by using the data from the nearby (R < 100 km) dense seismic stations. The Boatwright's method (2007) was adopted for this purpose in which the azimuth and takeoff angle of the unilateral rupture directivity function could be estimated based on the relative peak ground-motions of seismic stations resulting from the nature of the rupture directivity. In this study, the approximate values of the relative peak ground-motions was derived from the difference between the log residuals of the point-source spectral model (Boore, 2003) for the main and secondary events based on the Random Vibration Theory. In this derivation, the spectral difference for a frequency range between the source corner frequencies of main and secondary events was considered to reflect only the effect of the fault directivity. The inversion result of the model parameters for the fault directivity function showed that the fault-plane of NWW-SEE direction dipping steeply to the North with high rupture velocity near upward in SE direction is responsible for the observed high level of ground-motion at the near-source region.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.339-345
• /
• 2016

While a game market has been growing consistently world widely, a market of arcade or video game has been detained. In this stagnation, the latest one in 2015, "Super Mario Maker" of Mario series that's been running in good for 30 years, the notable sale and growth of which are extraordinary. As for a study in customizing, a literature of game customizing and studies that are foregone were mostly handling contents about a game character. In the survey that's done in this thesis about knowledge and needs in customizinge game users have, it was shown they want to customize sides of a rule and a character. I analyzed what the main factors are in this game which uses a main concept of customizing and the reason for high profits and popularity. As a result of the analysis, four features, possibility to customize a game rule, share data among users, collaboration in marketing with NFC figure characters, offering updates with sustained and new customizing features were found out. I am certain a game customizing will be helping to meet users and be used for various industries without limit of existing character.