• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.35-39
• /
• 2015

This study was presented the small action by the budge sonance function. An estimation of budge sonance function was acquired displacements across all condition with a variation of small action. The budge sonance function was to be indicated to express the flow rate of body motion. Their function was suggested an issue of the action condition by budge sonance. This system was proposed a combination of the body motion and small action. The acquired sonance signal was to render the small action of body motion with budge sonance function. The analysis of budge function was generally realized a variation from displacements on the fast body motion. Budge sonance signal of action that vision condition was acquired to a variation of the $Vi-{\beta}_{AVG}$ with $(-4.954){\pm}(-5.42)$ units, that vestibular condition was acquired to a variation for the $Ve-{\beta}_{AVG}$ with $(-2.288){\pm}0.212$ units, that somatosensory condition was acquired to a variation for the $So-{\beta}_{AVG}$ with $(-0.47){\pm}0.511$ units, that CNS condition was acquired to a variation for the $C-{\beta}_{AVG}$ with $(-0.171){\pm}(-0.012)$ units. Budge sonance function was proposed the small action from axial action on body control. We know a body motion response from axial action was not only variation of budge sonance, but also body motion of fast body motion.

• 한국컴퓨터산업학회논문지
• /
• 제8권3호
• /
• pp.181-186
• /
• 2007

폐쇄된 계 내부와 외부에서 작용되는 운동에는 선형 열린 운동과 닫힌 운동이 있고 비선형 열린 운동과 닫힌 운동이 있다. 선형 닫힌 운동이 마찰과 같은 외력을 받을시 갇힌 운동이 발생된다. 회전 닫힌 운동에도 마찰과 같은 외력을 받을시 회전 갇힌 운동이 있음을 해석 한다. 회전 닫힌 운동과 갇힌 운동을 액체 실험 장치를 통하여 정량적으로 고찰하고 회전 갇힌 운동이 있음을 분석하여 회전 열린 운동, 닫힌 운동 과 갇힌 운동에 대한 컴퓨터 씨뮬레이션 수식모델을 정한다. 그리고 간단한 운동 장치의 그래픽 구조를 고려 할 수 있도록 소개한다.

• 대한산업공학회지
• /
• 제37권1호
• /
• pp.10-18
• /
• 2011

Ergonomic product design considering users' natural use motion is of importance to improve the usability and satisfaction of a product. A five-step process of product design was developed in the present study by measuring and analyzing users' natural product-use motion with a motion capture system. The developed process was applied to ergonomic design improvement of a half guard installation part of refrigerator; new guard designs (diagonal and arc shape) were developed with the process and evaluated in terms of validity during the development as two measures (task satisfaction and similarity of natural motion). According to the evaluation result, the satisfaction at putting in- and out-task of new guard designs ($6.3{\pm}0.5$ points) was significantly higher than that of existing guard designs ($3.3{\pm}1.0$ points); the difference between natural motion and product-use motion in new guard designs ($1.0{\pm}0.3cm$) was significantly less than that of existing guard designs ($2.0{\pm}0.2cm$). The proposed process of natural motion analysis and product design is applicable to ergonomic product design and evaluation.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1343-1355
• /
• 1997

Full motion video data is the most effective data type that transmits information in multimedia enviornment. VOD service is system that uses network to transmit full motion video data interactively. Therefore VOD service system must satisfy the following requirements. First, it should transmit high quality full motion video. Second, it should be able to control a large quantity of full motion video. Third, a user should be able to retrieve the full motion vide effectively. However the existing VOD service system is established based n file system that not only does it have disadvantages in managment such as transaction control but also it is not suitable for distributed multimedia environment. The goal of this research is to build a VOD service system that provides high-quality full motion video assuming information retrieval. In order to mainly search video data's bibliographical information and to manage related information, VOD service system and DBMS system are to be closely related. Also, to transmit high quality full motion video data, we use MTP$^{TM}$(Media Transfer Protocol) developed by StarLight. MTP$^{TM}$ guarantees high bandwidth that is necessary to tansmit high quality full motion video data effectively. In other hand TCP/IP which is used for information search does not guarentee high bandwidth as that in MTP$^{TM}$. Therfore VOD service system that seraches information managed by DBMS and transmits requried full motion video data should control different kinds of protocol simultaneously. This paper describes the configuration of VODB system that has solved these problems, implementation and efficiency of data applied system.stem.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1144-1149
• /
• 2003

It is very important to measure circular motion accuracy of NC lathes it affects accuracy, performance, interchange ability and quality of machine parts machined by the NC lathes in industries. So, in this study, measuring units system to measure circular motion accuracy two axes circular motion accuracy of NC lathes was composed of two optical linear scales installed on the z and x-axes of work coordinate system on NC lathe and a computer inserted with PC counter card enables to obtain measuring data. Here, ATC(Automatic Tool Changer) and moving part of linear scales are fixed with magnet bases in order to measure circular motion accuracy of the ATC of NC lathe. And next, computer software was developed in order to measure the circular motion accuracy of NC lathe under resolution of 0.1 $\mu\textrm{m}$ using two linear scales, and also computer softwares were developed so that measuring data could be modeled on plots and be analyzed numerically,

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.643-644
• /
• 2006

The purpose of this study is to experimentally analyze swing motion with soft golf clubs and compare with that with normal golf clubs. Soft golf is newly devised recreational sport based on golf but focus on the playability for the elderly. The subject fur the experiment performed swing motion using a normal golf club and a soft golf club in turn. The swing motion of the subjects was tracked using an opto-electric three-dimensional motion analysis system. The results were compared against those obtained with a normal golf club. The range of motion was analyzed along with top head speed for two cases. It was found that higher club head speed could be achieved with reduced range of motion at lumbar joint using soft golf club when compared against the swing using regular club. The lower range of motion fur lumbar bending means reduced risk of injury at the joint. So, it is projected that we can reduce the risk of injury with soft golf while maintaining the club head speed.

• The Journal of Korean Physical Therapy
• /
• 제27권2호
• /
• pp.89-95
• /
• 2015

Purpose: The purpose of this study is to determine the effects of visual information on movement time and each angular velocity of trunk and lower extremity joints while healthy adults are in sitting and squat motion. Methods: Participants consisted of 20 healthy male and female adults; movement time and each angular velocity of trunk, pelvis, hip, knee and ankle of sitting and squat motion according to common vision, visual task and visual block were analyzed using a three dimensional motion analysis system. Results: Each angular velocity of the trunk, pelvis, hip, knee and ankle in phase 2 of the sitting showed significant difference according to the types of visual information (p<0.05). Movement time and each angular velocity of pelvis and hip in phase 2 of squat motion showed significant difference according to the types of visual information (p<0.05). According to the common vision, each angular velocity of knee and ankle in phase 1 was significantly fast in sitting (p<0.05). According to the common vision, each angular velocity of trunk, pelvis, hip, knee, and ankle in phase 2 was significantly fast in sitting (p<0.05). Conclusion: Visual information affects the angular velocity of the motion in a simple action such as sitting, and that in more complicated squat motion affects both the angular velocity and the movement time. In addition, according to the common vision, visual task and visual block, as angular velocities of all joints were faster in sitting than squat motion.

• 한국항공우주학회지
• /
• 제34권3호
• /
• pp.6-13
• /
• 2006

본 연구에서는 저 레이놀즈수 유동에서 flapping운동을 하는 익형이 가질 수 있는 2차원 평면상의 운동궤적에 따른 공력특성을 연구하였다. 익형이 유동흐름방향으로 왕복 운동하는 lead-lag운동과 plunging운동의 조합으로 2차원 평면상에 나타날 수 있는 여러 운동궤적을 합성하여 flapping 주파수 변화에 따른 공력계수들의 변화를 살펴보았다. 상하방향의 순수 plunging운동에 lead-lag운동을 추가함으로써, 평균추력계수와 평균양력계수를 증가시킬 수 있는 운동궤적이 존재함을 확인하였다. 아울러 운동주기 동안 나타나는 추력계수와 양력계수의 변화를 비교하여 upstroke와 downstroke시 나타나는 공력특성을 파악하였다.

• 한국해양공학회지
• /
• 제14권4호
• /
• pp.35-42
• /
• 2000

The sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. But in this paper, we introduce and synthesize a new type of swing motion control system. In this control system, a small auxiliary mass is installed on the spreader. And the actuator reacts against the auxiliary mass, applying intertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we apply the LMI approach and simultaneous optimization design method to design the anti-swing motion control system for the controlled plant. And the simulation result shows that the proposed control strategy is shown to be robust to disturbances like winds and initial sway motion.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.39-47
• /
• 2011

The motion of a conductive spherical particle under uniform electric field is investigated in order to find a suitable method for removing the conducting solid impurities contained in liquid plastic. When the positive dc voltage applied to the upper electrode, the vertical up-and-down motion of a charged particle by electrostatic force is observed by a charge-coupled device (CCD) camera or a high-speed video camera. The experimental data of the static threshold voltage by which the particle starts to move toward the counter electrode in air or silicone oil are in good agreement with theoretical value. When the applied voltage is larger than the static threshold voltage, the particle motion pattern in silicone oil consists of four stages: upward motion, stopping at the upper electrode, downward motion and stopping at the lower electrode. The stopping motion on the electrode is thought to be caused by the liquid flow accompanied by the particle motion. The particle charge calculated by integrating the pulse current, which is generated by the charge exchange between the electrode and the particle, is approximately 0.1~0.25 times of the theoretical value. This study is expected to help understand the electric properties of microparticles in oil circuit breaker (OCB) and oil transformer and improve their performance and longevity.