• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.9
• /
• pp.765-772
• /
• 2015

Aerodynamic force measurements and phase-locked PIV study were carried out to check the bio-mimetic MAV applicability of a swift flight. Two-rotational DOF robotic wing model and blowing-type wind tunnel were employed. The amplitude of twist angle were ${\pm}0$, ${\pm}5$, ${\pm}10$, and ${\pm}20$ deg. and stroke angles were manipulated by simple harmonic function with out-of-phase in regards to the stroke motion. It is acknowledged that the time-varying lift coefficients in accordance with the change of the twist angle did not result in any noticeable differences, just the small decrease and delay. However, the drag exhibited that the small change of the twist angle can produce large thrust. These findings imply why a swift uses small twist angle during flight. The PIV results displayed that the delay of aerodynamic forces is highly associated with the vortical structures around the wing. It is therefore indicated that a process of designing a swift-based Micro Air Vehicle should take the twist angle into consideration, as the essential parameter.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.11
• /
• pp.1314-1319
• /
• 2001

Objects : Because of the nonspecific nature of symptoms in tuberculous spondylitis, a delay in the diagnosis can result in progressive neurologic deficits. The authors evaluate the clinical and the radiological results of the 10 cases of surgically treated tuberculous spondylitis. Clinical materials & Methods : We retrospectively analyzed the medical records of 10 patients with tuberculous spondylitis who were treated between February 1996 and March 2000. Six patients were female, and four were male. Mean age was 43 years old, and mean follow-up period was 20.5 months. All patients were treated with 12 months of antituberculous medication postoperatively, and were followed by complete blood count, ESR, spine X-ray and MRI. Results : The lumbar spine was involved in 5 patients, the thoracic in 4, and the thoracolumbar in one. The infected vertebral bodies were 2.8 in average. The associated lesions were pulmonary tuberculosis in 3 cases, and renal tuberculosis in one. Five patients were treated by anterior debridement and fusion with bone graft using anterior instrumentation, 2 with anterior debridement and fusion with bone graft(Hong Kong procedure only), 1 with Hong Kong procedure with posterior spinal instrumentation, and 2 were managed with posterior debridement and posterior spinal instrumentation. All patients improved after operation, and the average kyphotic angle decreased postoperatively. Postoperatively, one patient had a fistula at the operative site. Conclusion : The debridement and minimal level fusion of motion segment with instrument fixation is one of surgical option for tuberculous spondyltis to preserve the spine motion segment as much as possible. Spine instability and kyphosis were prevented by anterior and posterior spinal instrumentation. But, large number of cases and longer period follow-up study in future will be needed to confirm the long term results.

• Archives of Reconstructive Microsurgery
• /
• v.6 no.1
• /
• pp.96-102
• /
• 1997

The gracilis that is frequently used as a donor of free muscle trasfer is appropriate in the muscular shape and vascular position. This muscle is belonged to the second type of muscle group by the classification of the pattern of muscular nutrient vessel. The adductor branch or first perforating branch of deep femoral artery which supplies the proximal 1/3 of this muscle is a dominant one and this is used for the microscopic anastomosis of muscle or musculocutaneous flap. The minor vascular pedicles which enter the distal 1/3 of this of this muscle are branches of the superficial femoral artery and it is 0.5mm in diameter, 2cm in length with two venae comitantes. These minor pedicles supplies distal half of the gracilis muscle. This island musculocutaneous flap using distal vascular pedicle can be used to cover the defect of soft tissue around the distal femoral supra-condylar area, knee joint and proximal tibial condyle area which cause limitation of motion of knee joint, or in the cases that usual skin graft is impossible. The important operative procedure is as follows; The dissection is carried proximally and distally and the entire gracilis muscle including proximal and distal pedicle is completely dissected. After temporary blocking of the proximal vascular pedicle, the adequate muscle perfusion by the distal pedicle is identified and it is rotated to the recipient site around knee joint. The advantages of this procedure are simple, no need of microscopic vascular anastomoses and no significant functional loss of donor site. Especially in the cases of poor condition of the recipient vessel, this procedure can be used effectively. From 1991 to 1996, we performed 4 cases; complete survival of flap in 3 cases and partial survival of flap with partial necrosis in 1 case. This procedure is though to be useful in the small sized soft tissue defect of distal femoral supra-condylar area, knee joint and proximal tibial condylar area, especially in the defect of anterior aspect which expected to cause limitation of motion of knee joint due to scar contracture. But the problems of this procedure are the diameter of distal vascular pedicle is small and the location of distal vascular pedicle is not constant. To reduce the failure rate, identify the muscular perfusion of distal vascular pedicle after blocking the proximal pedicle, or strategic delay will be helpful.

• Explosives and Blasting
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2013

In blasting demolition, a method would be chosen among many depends on shape and system of a structure and its surround. To demolish using explosives a structure, which is asymmetric and with high aspect ratio, pre-weakening, explosive locations, detonating delay, and surround conditions are needed to be considered in front to design blasting demolition plan. In this study, to over turn asymmetric and high aspect ratio structure in safe, a simulation using a software named Extreme Loadings for Structures, ELS, had performed. In results, it is achieved optimized pre-weakening shapes and locations, which prevent kick back motion of the structure when it collapse, by analyzing moment distribution caused by pre-weakening. And of structural collapse and by minimizing asymmetric structure's torsional moment. Also, after the demolition, simulation results are also compared with actual collapse behavior. In results, it is confirmed the accuracy of collapse behaviour simulation results, and in blasting demolition, kick back motion can be controled by adjusting pre-weakening shape and location, and the torsional moment of an asymmetric structure also can be solved by optimizing detonation locations and its time intervals.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.227-234
• /
• 2018

Researches regarding measurement and control of the dynamic behavior of liquid such as sloshing have been actively on undertaken in various engineering fields. Liquid vibration is being measured in the study of tuned liquid dampers(TLDs), which attenuates wind motion of buildings even in building structures. To overcome the limitations of existing wave height measurement sensors, a method of measuring liquid vibration in a TLD using a laser Doppler vibrometer(LDV) and galvanometer scanner is proposed in this paper: the principle of measuring speed and displacement is discussed; a system of multi-point measurement with a single point of LDV according to the operating principles of the galvanometer scanner is established. 4-point liquid vibration on the TLD is measured, and the time domain data of each point is compared with the conventional video sensing data. It was confirmed that the waveform is transformed into the traveling wave and the standing wave. In addition, the data with measurement delay are cross-correlated to perform singular value decomposition. The natural frequencies and mode shapes are compared using theoretical and video sensing results.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.483-488
• /
• 2015

Objective : The purposes of this study was to analyze the locomotive movement of forelimbs according to changes in velocities in the quadruped cadence of horses. Methods : Horses selected as subjects consisted of Jeju pony horses (heights of withers: $1.23{\pm}0.51$). Two camcorders (HDR-HC7/HDV 1080i, Sony Corp, Japan) were used to capture the movement of the horses' forelimbs at a rate of 60 frames/sec. Additionally, raw data was collected from Kwon3D XP motion analysis package ver 4.0 program (Visol, Korea) with DARTFISH (DFKREA., Korea) video software solution. The variables analyzed consisted of 1 step lengths, 1 stride lengths, stance time, swing time, 1 stride time, velocity while walking, and trot of the horses. A two-way ANOVA and paired t-test of the variables by velocity and phase were treated at .05 level of significant difference, statistically. Results : The time elapsed of walk(stance: 0.63 sec[63.86%], swing: 0.35 sec[36.14%], 1 stride time: 0.99 sec respectively) showed significant difference with more delay than that of trot(stance: 0.29 sec[45.73%], swing: 0.34 sec[54.27% ], 1 stride time: 0.63 sec respectively), and also showed significant difference at trot in interaction (stance time>tort swing>walk swing>walk stance). The 1 step lengths and stride lengths in trot showed significant difference with longer than that of walk. Velocity of Trot showed significant difference statistically with higher than that of walk Conclusion : The horses' velocity during 1 step lengths and 1 stride lengths showed a proportional relationship, but the correlation between the horses' velocity and stance time showed a negative relationship during the quadruped cadence.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.1
• /
• pp.12-20
• /
• 1994

Generally, the totally paralyzed face can never be made normal by any of the current methods of reconstruction. Careful selection of patients based on sound judgment of what can and cannot be achieved by the proposed surgical technique is paramount to a successful operation and a satisfied patient. The results are related to time of delayed between injury and repair ; the shorter the delay the better are the results. The objectives in correcting facial paralysis are to achieve normal appearance at rest ; symmetry with voluntary motion ; control of the ocular, oral, and nasal sphincter ; symmetry with involuntary emotion and controlled balance when expressing when expressing emotion ; and no significant functional deficit secondary to the reconstructive surgery. It must be employed a number of concepts, for treatment of the paralyzed face by surgeon, depending on the cause, time interval, and wound characteristics, as well as the availability of and necessity for neuromuscular substitution. Nerve grafts, crossovers, muscle transfers, free muscle and nerve-muscle grafts, micronuerovascular muscle transfers, and regional muscle transposition are the principal methods being developed. We applied the temporal musle transposition for reanimation of unilatrally paralyzed faces for long times on two patients. The results of muscle transposition can be enhanced by the patient's learning to activate the transposed muscle by voluntary effort, and are best in patients who are motivated to learn the necessary motor-sensory coordination techniques.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.3 s.24
• /
• pp.14-22
• /
• 2004

Bileaflet mechanical valves have the complications such as hemolysis and thromboembolism, leaflet damage, and leaflet break. These complications are related with the fluid velocity and shear stress characteristics of mechanical heart valves. The first aim of the current study is to introduce fluid-structure interaction method for calculation of unsteady and three-dimensional blood flow through bileaflet valve and leaflet behavior interacted with its flow, and to overcome the shortness of the previous studies, where the leaflet motion has been ignored or simplified, by using FSI method. A finite volume computational fluid dynamics code and a finite element structure dynamics code have been used concurrently to solve the flow and structure equations, respectively, to investigate the interaction between the blood flow and leaflet. As a result, it is observed that the leaflet is closing very slowly at the first stage of processing but it goes too fast at the last stage. And the results noted that the low pressure is formed behind leaflet to make the cavitation because of closing velocity three times faster than opening velocity. Also it is observed some fluttering phenomenon when the leaflet is completely opened. And the rebounce phenomenon due to the sudden pressure change of before and after the leaflet just before closing completely. The some of time-delay is presented between the inversion point of ventricle and aorta pressure and closing point of leaflet. The shear stress is bigger and the time of exposure is longer when the flow rate is maximum. So it is concluded that the distribution of shear stress at complete opening stage has big effect on the blood damage, and that the low-pressure region appeared behind leaflet at complete closing stage has also effect on the blood damage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1435-1440
• /
• 2017

Recently, VR and AR are emerging as an area of interest in ICT. In virtual reality to feel like a real, many people are looking for them because of its charm. However, the motion of the VR image and the moving object are not synchronized exactly, and a problem of feeling nausea is also occurring. The problem should be solved by the application of Attraction in the VR system. In this paper, we propose a module that minimizes delay time by synchronizing movement of VR image and moving object. The proposed module calculates the moving distance using the direction and the acceleration sensor that the user views through the VR device. The module proposed in this paper will pay attention to the fact that the movement of the attraction moves along a fixed path, so that the accurate travel distance can be calculated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.185-194
• /
• 2008

In this paper, an efficient technique is proposed to integrate the 3D user interface with the tiled display system in PC cluster environment. In the developed 3D user interface software, various menus are provided to increase the user friendliness of the interface, including the several model-control-commands. To eliminate the noise produced from the 3D user interface devices, the box filtering algorithm is employed. Further, a communication splitting algorithm, which is a kind of asynchronous communication method, is proposed to reduce the motion delay between the 3D interface and the tiled display system, and its efficiency is validated through the benchmarking tests.