• 한국운동역학회지
• /
• 제22권4호
• /
• pp.379-386
• /
• 2012

The aim of this study was to investigate and identify the differences in lower extremity energy dissipation strategies between drop-landing and countermovement-jump maneuvers. Fourteen recreational athletes(Age : $23.3{\pm}2.1years$, Height : $172.3{\pm}4.0cm$, Weight : $69.2{\pm}4.7kg$) were recruited and instructed to perform drop-landing from 45 cm height and countermovement-jump from 45 cm to 20 cm height. The landing phase was taken as the time between initial contact and peak knee flexion. A motion-capture system consisting of eight infra-red cameras was employed to collect kinematics data at a sampling rate of 200 Hz and a force-plate was used to collect GRF data at a sampling rate of 2000 Hz. Paired t-test was performed to determine the difference in kinematics and kinetics variables between each task. During the countermovement-jump task, all of lower extremity joint ROM and the hip joint eccentric moment were decreased and the ankle joint plantarflexion moment was increased than drop-landing task. In the eccentric work during countermovement-jump task, the ankle joint displayed greater while knee and hip joint showed lesser than drop-landing. Therefore, the knee joint acted as the key energy dissipater during drop-landing while the ankle joint contributed the most energy dissipation during countermovement-jump. Our findings collectively indicated that different energy dissipation strategies were adopted for drop-landing and countermovement-jump.

• 한국운동역학회지
• /
• 제18권3호
• /
• pp.33-42
• /
• 2008

이 연구는 생횔체육 프로그램으로서의 태권에어로빅스 옆차기 동작의 운동학적 분석으로 대상자는 숙련자와 비숙련자 각 7명으로 하였다. 자료는 Qualisys사의 Proreflex MCU-240 카메라 7대를 샘플링 율(sampling rate), 100frames/sec로 촬영한 후 Qualisys System(SWEDEN)의 QTM(Motion Capture Software)으로 위치 좌표를 얻었으며 Visual3D를 사용하여 연구변인을 산출하였고, 두 집단간의 평균치 차이 검정은 SPSS 12.0K의 독립 t-test를 유의수준 p<.05로 실시하였다. 그 결과는 다음과 같다. 1. 구간별 소요시간은 전 구간에서 통계적으로 유의한 차이가 없었다. 2. 무릎 각도의 경우 제2 무릎최대굴곡순간(p=0.046, F=4.925)에서 통계적으로 유의한 차이가 있었다. 3. 무릎 각속도의 경우 제1 무릎최대굴곡순간(p=0.031, F=5.940)에서 통계적으로 유의한 차이가 있었다. 4. 힙의 굴곡/신전 각도는 제2 무릎최대굴곡순간(p=0.012, F=8.668)에서 통계적으로 유의한 차이가 있었다. 5. 힙의 외/내전 각속도는 무릎최소굴곡순간(p=0.019, F=7.324)에서 통계적으로 유의한 차이가 있었다. 6. 힙의 외/내측 회전각속도는 무릎최소굴곡순간(p=0.005, F=11.87)에서 통계적으로 유의한 차이가 있었다.

• 한국콘텐츠학회논문지
• /
• 제7권4호
• /
• pp.234-240
• /
• 2007

이 연구는 철봉 몸굽혀 휘돌기 동작의 최적 모델을 구축하는 것이다. 연구 대상자는 국가대표 남자체조선수(나이 18세, 신장 153cm, 질량 48kg) 1명을 선정하였고, K대학교 체조장에 기 설치된 Spieth사의 철봉을 이용하여 실험하였다. 먼저 대상자에게 연구의 목적과 주의 사항을 주지시키고 사전 서면동의를 받은 후 실험을 실시하였다. 인체를 2분절로 모형화한 몸 굽혀 휘돌기 동작의 영상분석을 위하여 Qualisys사의 카메라(MCU-240) 6대와 소프트웨어인 QTM(Qualisys Track Mannager)을 사용하였다. 이 동작을 이중진자(HAT/total leg)로 모형화하고 라그랑지 운동방정식의 파라메터에 실험에서 획득한 수치를 입력하여 시뮬레이션하였다. 데이터 처리와 모델(미분 연립 방정식)의 해는 Mathematicas5.0으로 프로그래밍하여 구하였다. 분석변인에 대한 모델치와 실험치의 비교 결과는 첫째, 철봉의 최대변위는 모델치(약 0.18 m)가 실험치(약 0.16 m)보다 약 0.02m 더 크게 나타났다. 둘째, 분절1(HAT)의 각변위 패턴은 모두 증가곡선을 보였으나 변곡점의 차이가 나타났다. 셋째, 분절2(total leg)의 각변위 패턴은 전반적으로 유사하게 나타났으나 최대 각은 약 $4^{\circ}$ 차이를 보였다. 결론적으로 실험치와 일치하는 최적모델을 도출하지는 못하였지만 라그랑지 모델을 통한 시뮬레이션의 가능성을 제시하였다. 향후 제한된 2분절 모형을 3, 4분절 모델로 확장하고 생체물성(근골격계)을 정확하게 표현하는 물리적 도구를 개발하는 연구와 인체시스템을 근골격계와 근신경계을 통합한 모델구축이 이루어져야 하겠다.

• 한국운동역학회지
• /
• 제25권4호
• /
• pp.483-488
• /
• 2015

Objective : The purposes of this study was to analyze the locomotive movement of forelimbs according to changes in velocities in the quadruped cadence of horses. Methods : Horses selected as subjects consisted of Jeju pony horses (heights of withers: $1.23{\pm}0.51$). Two camcorders (HDR-HC7/HDV 1080i, Sony Corp, Japan) were used to capture the movement of the horses' forelimbs at a rate of 60 frames/sec. Additionally, raw data was collected from Kwon3D XP motion analysis package ver 4.0 program (Visol, Korea) with DARTFISH (DFKREA., Korea) video software solution. The variables analyzed consisted of 1 step lengths, 1 stride lengths, stance time, swing time, 1 stride time, velocity while walking, and trot of the horses. A two-way ANOVA and paired t-test of the variables by velocity and phase were treated at .05 level of significant difference, statistically. Results : The time elapsed of walk(stance: 0.63 sec[63.86%], swing: 0.35 sec[36.14%], 1 stride time: 0.99 sec respectively) showed significant difference with more delay than that of trot(stance: 0.29 sec[45.73%], swing: 0.34 sec[54.27% ], 1 stride time: 0.63 sec respectively), and also showed significant difference at trot in interaction (stance time>tort swing>walk swing>walk stance). The 1 step lengths and stride lengths in trot showed significant difference with longer than that of walk. Velocity of Trot showed significant difference statistically with higher than that of walk Conclusion : The horses' velocity during 1 step lengths and 1 stride lengths showed a proportional relationship, but the correlation between the horses' velocity and stance time showed a negative relationship during the quadruped cadence.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.678-683
• /
• 2006

본 논문에서는 휴대 단말을 위한 새롭고 직관적인 응용 프로그램 구동 방식을 제안한다. 핵심 아이디어는 사용자가 휴대 단말을 사용할 때 자연스럽게 발생하는 파지 형태를 응용프로그램 구동의 근거로 활용하는 것이다. 이를 위해 정전 용량 방식 터치 센서 시스템을 제작하고 이를 휴대 단말의 케이스 하부에 장착을 해 사용자의 파지 형태를 취득한다. 획득된 파지 형태의 인식을 위해 제안한 시스템에 특화된 인식기 및 전처리와 후처리 알고리즘을 개발하였다. 제안된 사용자 인터페이스 시스템의 효용성을 검증하기 위해 인식률 테스트를 수행한다.

• 한국운동역학회지
• /
• 제27권3호
• /
• pp.171-179
• /
• 2017

Objective: The purpose of this study was to perform a kinematic and kinetic analysis of double-under jump rope technique according to skill level and sex. Method: Participants comprised a skilled group of 16 (9 males, 7 females), and an unskilled group of 16 with 6 months or less of experience (9 males, 7 females). Five consecutive double-under successes were regarded as 1 trial, and all participants were asked to complete 3 successful trials. The data for these 3 trials were averaged and analyzed after collecting the stable third jump in each trial. The variables used in the analysis included phase duration, total duration, flight time, vertical toe height, stance width, vertical center of mass displacement, and right lower limb ankle, knee, and hip joint angles in the sagittal plane during all events. Results: The skilled group had a shorter phase and total duration and a shorter flight time than the unskilled group. The vertical center of mass displacement and ankle dorsiflexion angle were significantly smaller in the skilled group. The male group had a shorter phase duration than the female group. The vertical toe height was greater, the stance width was smaller, and the ankle and hip flexion angles were smaller in the male group. Conclusion: Variables that can be used to distinguish between skill levels are phase and total duration, flight time, vertical center of mass displacement, and ankle dorsiflexion angle. Differences between sexes in double-under jump rope technique may be related to lower limb flexion angle control.

• 한국운동역학회지
• /
• 제25권1호
• /
• pp.29-37
• /
• 2015

Objective : The purpose of this study was to investigate the biomechanical properties of shock absorption strategy and postural stability during the drop landing for each types. Methods : The motions were captured with Vicon Motion Capture System, with the fourteen infra-red cameras (100Hz) and synchronized with GRF(ground reaction force) data(1000Hz). Ten male soccer players performed a drop landing with single-leg and bi-legs on the 30cm height box. Dependent variables were the CoM trajectory and the Joint Moment. Statistical computations were performed using the paired t-test and ANOVA with Turkey HSD as post-hoc. Results : The dominant leg was confirmed to show a significant difference between the left leg and right leg as the inverted pendulum model during Drop Landing(Phase 1 & Phase 2). One-leg drop landing type had the higher CoM displacement, the peak of joint moment with the shock absorption than Bi-leg landing type. As a lower extremity joint kinetics analysis, the knee joint showed a function of shock absorption in the anterior-posterior, and the hip joint showed a function of the stability and shock absorption in the medial-lateral directions. Conclusion : These findings indicate that the instant equilibrium of posture balance(phase 1) was assessed by the passive phase as Class 1 leverage on the effect of the stability of shock absorption(phase 2) assessed by the active phase on the effect of Class 2 leverage. Application : This study shows that the cause of musculo-skeletal injuries estimated to be focused on the passive phase of landing and this findings could help the prevention of lower damage from loads involving landing related to the game of sports.

• 한국운동역학회지
• /
• 제25권2호
• /
• pp.149-155
• /
• 2015

Purpose : Recently, many researchers and golf coachers demonstrated that X-factor and X-factor stretch had a co-relationship with driving distance. However, its relationship is still controversial and ambiguous. Thus, the aim of this study was to examine the relationship among X-factor, X-factor stretch and swing-related factors, including driving distance in elite golfers. Method : Seventeen male elite golfers (handicap: ${\leq}4$) with no history of musculo-skeletal injuries participated in the study. Thirty spherical retro-reflective markers were placed on including the middle point of PSIS, the right/left ASIS, the right/left lateral acromion of the scapula, driver head and shaft grip. All motion capture data was collected at 100Hz using 6 infrared cameras. Carry distance, club speed, ball speed, smash factor, launch angle, and spin rate were collected from radar-based device, TrackMan. Results : Pearson's correlation coefficient method was used to find the correlations among X-factor, X-factor stretch and swing-related factors. Positive correlations between driving distance and other swing-related factors which include club speed(r=.798, p<.001), and ball speed(r=.948, p<.001) were observed. In contrast to the swing-related factors, X-factor and X-factor stretch had no relationship to driving distance. Conclusion : These results indicate that X-factor and X-factor stretch are not key regulators in driving distance.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.153-160
• /
• 2017

보행 분석은 다양한 지형에서 수행되고 있으나 지형이 변화되는 시점에서의 보행 분석 연구는 보고된 바 없다. 본 연구의 목적은 삼각경사 보행 시 지형이 변화되는 시점에서 발목 및 무릎 관절의 운동학과 운동역학을 평지 보행과 비교 분석하는 것이다. 3차원 동작분석 시스템과 지면 반력기를 사용하여 성인 남성 18명의 하지 운동학 및 운동역학 자료를 획득하였다. 삼각경사 보행에서 최대 발목 배측굴곡각 및 모멘트와 최대 무릎 신전 모멘트가 평지보행과 비교하였을 때 증가하였다(p<0.05). 삼각경사의 상승경사 보행 시 $50^{\circ}$가 넘는 무릎 굽힘각과 그 시기에 발생하는 큰 무릎 신전 모멘트는 슬개대퇴증후군의 위험을 높일 수 있을 것으로 보인다. 또한 삼각경사의 하강경사 보행에서 증가된 발목 배측굴곡 운동범위는 비복근과 아킬레스건 부상 위험을 높일 수 있을 것으로 보인다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.551-555
• /
• 2010

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models. In level set method, in the mean time, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We viscosity, thermal conductivity, electrical conductivity, and permittivity, can be an alternative. I.e., the WHM gives more accurate results than the WAM method in certain circumstances. The interpolation scheme should be selected considering various characteristics including type of property, ratio of property of two fluids, geometry of interface, and so on.