• Journal of the Korean institute of surface engineering
• /
• v.42 no.2
• /
• pp.59-62
• /
• 2009

Antireflection pattern, moth-eye structure, was fabricated on lens using Ultra Violet nanoimprint lithography and flexible template. Ni template with conical shaped structure was used as a master template to molding. The flexible poly vinyl alcohol template was fabricated by molding. This poly vinyl alcohol template was used as an imprint template of imprint at lens. Using Ultra Violet nanoimprint lithography and poly vinyl alcohol template, polymer based moth-eye structure was formed on lens and its transmittance was increased up to 94% from 92% at 550 nm wavelength.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.389-390
• /
• 2012

In this study, we fabricate a superhydrophobic surface made of hierarchical nanostructures that combine wax crystalline structure with moth-eye structure using vacuum cluster system and measure their hydrophobicity and durability. Since the lotus effect was found, much work has been done on studying self-cleaning surface for decades. The surface of lotus leaf consists of multi-level layers of micro scale papillose epidermal cells and epicuticular wax crystalloids [1]. This hierarchical structure has superhydrophobic property because the sufficiently rough surface allows air pockets to form easily below the liquid, the so-called Cassie state, so that the relatively small area of water/solid interface makes the energetic cost associated with corresponding water/air interfaces smaller than the energy gained [2]. Various nanostructures have been reported for fabricating the self-cleaning surface but in general, they have the problem of low durability. More than two nanostructures on a surface can be integrated together to increase hydrophobicity and durability of the surface as in the lotus leaf [3,5]. As one of the bio-inspired nanostructures, we introduce a hierarchical nanostructure fabricated with a high vacuum cluster system. A hierarchical nanostructure is a combination of moth-eye structure with an average pitch of 300 nm and height of 700 nm, and the wax crystalline structure with an average width and height of 200 nm. The moth-eye structure is fabricated with deep reactive ion etching (DRIE) process. $SiO_2$ layer is initially deposited on a glass substrate using PECVD in the cluster system. Then, Au seed layer is deposited for a few second using DC sputtering process to provide stochastic mask for etching the underlying $SiO_2$ layer with ICP-RIE so that moth-eye structure can be fabricated. Additionally, n-hexatriacontane paraffin wax ($C_{36}H_{74}$) is deposited on the moth-eye structure in a thermal evaporator and self-recrystallized at $40^{\circ}C$ for 4h [4]. All of steps are conducted utilizing vacuum cluster system to minimize the contamination. The water contact angles are measured by tensiometer. The morphology of the surface is characterized using SEM and AFM and the reflectance is measured by spectrophotometer.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.2
• /
• pp.50-55
• /
• 2015

$Al_2O_3$ thin films were deposited on the moth eye anti-reflective nanostructured polycarbonate films by atomic layer deposition (ALD) techniques. Without ALD-$Al_2O_3$ thin films, moth eye anti-reflective nanostructured films had a high optical transmittance of 95.47% at a wavelength of 550 nm and a very poor hardness of 0.1381 GPa. With increasing the thickness of $Al_2O_3$ thin films from 5 to 25 nm, the transmittance of moth eye anti-reflective nanostructured films was gradually decreased from 94.94 to 93.12%. On the other hand, the hardness of the films was greatly increased from 0.3498 to 0.7806 GPa with increasing the thickness of $Al_2O_3$ thin films. This result shows that ALD thin films can be applied to improve mechanical properties with an adequate optical transmittance of the conventional moth eye anti-reflection nanostructure films.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1838-1843
• /
• 2014

Nanoimprint lithography (NIL) fabrication process is regarded as the main alternative to existing expensive photo-lithography in areas such as micro- and nano-electronics including optical components and sensors, as well as the solar cell and display device industries. Functional patterns, including anti-reflective moth-eye pattern, photonic crystal pattern, fabricated by NIL can improve the overall efficiency of such devices. To successfully imprint a nano-sized pattern, the process conditions such as temperature, pressure, and time should be appropriately selected. In this paper, a cavity-filling process of the moth-eye pattern during the thermal-NIL within the temperature range, where the polymer resist shows the viscoelastic behaviors with consideration of stress relaxation effect of the polymer, were investigated with three-dimensional finite element analysis. The effects of initial thickness of polymer resist and imprinting pressure on cavity-filling process has been discussed. From the analysis results it was found that the cavity filling can be completed within 100 s, under the pressure of more than 4 MPa.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.176-177
• /
• 2015

최근 자연계에 존재하는 광학 구조체를 모사하여 우수한 반사 방지 효과를 표면에 구현하고자 하는 연구가 이루어지고 있으며, 특히 우수한 무반사 특성을 가지고 있는 나방의 눈 구조를 모사하여 응용하고자 하는 연구가 활발히 진행되고 있다. 하지만, 주로 폴리머를 기판으로 하여 구현되는 모스아이 구조의 필름은 기계적 성질이 좋지 않아 문제가 되고 있다. 따라서, 본 연구에서는 모스아이 나노구조가 형성된 폴리머 기판에 비해 기계적 물성이 우수한 $Al_2O_3$ 물질을 적용하여, 모스아이 패턴의 기계적 특성을 향상 시키면서도, 모스아이 패턴이 가지는 고유의 우수한 광학적 성질을 유지시키기 위한 실험을 진행하였다. 모스아이 패턴의 광학적 성질을 유지하기 위해서는 나노구조 돌기상에 위치에 따른 두께 차이가 최소화된 균일한 코팅층을 형성하여 그 구조를 유지시킬 필요가 있으므로 이러한 구조물상에 단차피복성(Step Coverage)이 우수하고 sub-nm 단위의 정밀한 두께 조절이 용이한 원자층 증착법(Atomic layer deposition, ALD)을 이용하여 박막을 증착하였다.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.87-94
• /
• 2009

KNI3126 which is the eco-friendly material made by plant extracts - neem and matrine - have been evaluated for efficacies against 6 main pests and toxicity on natural enemies. Insecticidal efficacies of KNI3126 against plant hopper were above 95% at 5 days after treatment (DAT), whereas pesticidal effects against the cotton aphid were above 95% at 3 DAT and slightly decreased at 5 DAT. Insecticidal efficacy against the palm thrips resulted in lower control value as 68.1% than that of chemical insecticides. KNI3126 showed more than 95% control value against diamond back moth, suggesting that it could suppress the population of pest hard to control as eco-friendly material. Mortalities against two-spotted spider mite were about 80% at 1 DAT and over 90% at 5 DAT, respectively. For evaluation of the toxicity on natural enemies, effect against predatory natural enemy was classified as moderate selective toxicity based on the criterion of International Organization of Bio-Control (IOBC), whereas against parasitic natural enemies was found to be relatively safe. Repellent effect was weak against plant hopper, but strong against two-spotted spider mite. In the toxicity test for safety, KNI3126 was classified as the lowest level at acute oral, acute dermal and fish toxicity test and did not induce the irritancy at skin irritation test and eye irritation test.

• The Korean Journal of Pesticide Science
• /
• v.4 no.1
• /
• pp.38-43
• /
• 2000

As the first step of a research on the establishment of control strategy for grapevine diseases and insects, the current status of pest control and yield losses by them were surveyed from grapevine growers of Korea. For insects, the most difficult to control was a grapevine stem borer and a grapevine clearwing moth was the next. On the other hand, several diseases including anthracnose, downy mildew, powdery mildew, bird's eye rot, leaf blight, were answered by the growers. The occurrence of the pests varied to the cultural practices. Yield loss was more serious in rainfall intercept culture than in plastic film house culture and diseases caused more loss in yield than insects did. However, the grapevine grower's potential for the identification of the kinds of pests was not high enough. When the pest was observed, the growers consulted mainly with local pesticide dealers or neighbouring growers and usually applied the pesticides prescribed by the dealer. More than half of the growers did not use pest control calendar, and most of the growers applied pesticides before any symptom appeared. Also, more than half of the growers applied mixture of at least more than 1 kind of pesticide and nutrients. Insecticides were applied less than 5 times during the season, but it was more than 6 times for fungicides. In the pesticide selection, the growers checked control effect first, regardless of the registration, and the pest control cost per unit area varied very much depending on the growers.