• 제목/요약/키워드: Morter

검색결과 6건 처리시간 0.019초

염용액에 침지한 콘크리트의 열화에 대한 연구

  • 문한영;김기형;김성수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1989년도 가을 학술발표회 논문집
    • /
    • pp.25-30
    • /
    • 1989
  • In this paper, morter and concrete specimens made with four cements were immersed in Mgcl2, MgSO4 Solution and artifical Seawater which was corresponded with Seawater. The hydration products of immersed cement pastes were looked over by using SEM, EDS and X-ray diffraction method. The results show that the concrete made with domestic flyash cement and blast-frrnace slag cement is superior to that of ordinary portland cement in resistance to chloride and sulphate solution. Especially, it is found that the attack of Cl-ion on the concrete plays an important role of the deterioration of concrete.

  • PDF

AE를 이용한 탄소섬유시트 강화 모르타르의 파괴거동에 관한 연구 (A Study on the Failure Behavior of Carbon Fiber Sheet Reinforced Mortar Using Acoustic Emission Technique)

  • 이진경;이준현;장일영
    • 콘크리트학회논문집
    • /
    • 제12권3호
    • /
    • pp.67-75
    • /
    • 2000
  • It was well recognized that the damages associated mainly with the aging of civil infrastructures were one of very serious problems for assurance of safety and reliability. Recently carbon fiber sheet(CFS) has been widely used for reinforcement and rehabilitation of damaged concrete beam. However, the fundamental mechanism of load transfer and its load-resistant for carbon fiber sheet reinforced concrete are not fully understood. In this study, three point bending test has been carried out to understand the damage progress and the micro-failure mechanism of CFS reinforced mortars. For this purpose, four different types of specimens are used, that is, mortar, steel bar reinforced mortar, CFS reinforced mortar, and steel bar and CFS reinforced morter. Acoustic Emission(AE) technique was used to evaluate the characteristics of damage progress and the failure mechanism of specimens. in addition, two-dimensional AE source location was also performed to monitor crack initiation and propagation processes for these specimens.

Straingage법에 의한 정적 상태에서의 회전체 축정렬 방법 개선 (Improvement of Rotor Axes Arrangement under the Static State by using Straingage Method)

  • 김경석
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1998년도 춘계학술대회 논문집
    • /
    • pp.117-122
    • /
    • 1998
  • The misalignment state causes some problems in operating. These problems such as vibration, noise, make the reduce wear, as well as, a stress concentration on the coupling which is the very weakness point at the morter. In order to align the shaft, the dialgage method has used as a means of solution until now. The method using a dialgage require a great deal of labour and money due to making by hand, the accurate alignment is not up to the expectation. For aligning the shaft, all the rotor must come to accord. Also, the dialgage method cannot be compared with straingage measurement method, from the viewpoint, which can gage in short time.

  • PDF

폐주물사의 치환율 변화에 따른 모르타르의 특성 분석 (An analysis of the properties of mortar according to the change of the replacement rate of waste foundry sands)

  • 류현기;권용주
    • 한국건설순환자원학회논문집
    • /
    • 제4권4호
    • /
    • pp.99-104
    • /
    • 2009
  • 폐주물사의 재활용을 위하여 최근 연구자들은 매립에 의존하지 않고 리사이클링하기 위해 노력하고 있으며, 폐주물사의 효율적인 재활용방법으로 시멘트와 결합하여 각종 건설용 자재로 사용하는 방법을 연구하고 있다. 본연구에서는 폐주물사를 대체 잔골재로 사용하여 1:2, 1:3, 1:5의 배합으로 부 빈배합의 예비실험을 통해 폐주물사의 성상을 실험적으로 검토하여 폐주물사를 적용할 수 있는 범위를 배합비 1:3의 W/C 43%와 50%의 2개 수준에 대한 실험으로 폐주물사의 적정 대체율을 찾아 활용할 수 있는 방안을 제안한다. 실험결과 굳지않은 모르타르의 특성으로 유동성은 폐주물사의 대체율이 증가 할수록 플로우는 감소하는 것으로 나타났으며, 공기량도 유동성과 유사한 경향으로 폐주물사의 대체율이 증사 할수록 감소하는 것으로 나타났다. 경화모르타르의 강도특성은 폐주물사를 치환 할수록 강도는 증가하는 것으로 나타났고, 폐주물사를 치환함으로써 초기강도가 증가하는 것을 알 수 있다. 수밀특성으로 투수량과 흡수량은 폐주물사의 미립분에 의해 공극충전효과로 투수량이 감소하는 것으로 나타나 수밀성을 요구하는 구조물에 폐주물사의 치환은 효과적일 것으로 사료된다.

  • PDF

Lignosulfonic Acid계(系) 감수제(減水劑)가 모르터의 강도(强度)에 미치는 영향(影響) (The Influence of Admixture of Lignosulfonic Acid Type on the Strength of Mortar)

  • 김한영;김성완
    • 농업과학연구
    • /
    • 제12권1호
    • /
    • pp.75-85
    • /
    • 1985
  • 본(本) 연구(硏究)는 Lignosulfonic Acid계(系) 감수제(減水劑)를 첨가(添加)한 모르터의 유동성(流動性) 개선(改善)과 강도변화(强度變化)를 구명(究明)하고자 시행(施行)하였다. 1. Plastic 상태(狀態)에서 Pozzolith-84의 첨가량(添加量)을 늘리면 Flow가 증가(增加)하였다. 이는 Pozzolith-84의 첨가(添加) 시(時) 전기적(電氣的) 이중층(二重層)이 형성(形成)되어 시멘트 입자(粒子) 상호간(相互間)에 반발력(反撥力)이 생겨 분산(分散)된 것으로 이 분산작용(分散作用)은 술폰산기(酸基)의 계면활성작용(界面活性作用)에 기인(基因)되며, 시공성(施工性)이 개선(改善)됨에 따라 Precast 제품(製品) 생산(生産) 시(時) 비용절감(費用節減)의 효과(效果)가 있으며, 단위수량감소(單位水量減少)에 의(依)해 구조물(構造物)의 내구성(耐久性)이 개선(改善)된다. 2. 경화(硬化)된 상태(狀態)에서는 P/C가 0.2, 0.4%일 때 보통(普通)모르터의 강도(强度)보다 다소증가(多少增加)되었으며, P/C가 0.8% 이상(以上)일 때 보통(普通) 모르터의 강도(强度) 보다 감소(減少)된 것은 잔류(殘留) 술폰산(酸)($SO_3H$), 무수유산(無水硫酸)($SO_3$)의 화학반응(化學反應)에 의(依)한 것으로 생각된다. 3. 비중(比重)과 압축강도(壓縮强度) 분석(分析) 결과(結果) 고도(高度)의 유의성(有意性)이 있었으며 비중(比重)이 커짐에 따라 압축강도(壓縮强度)도 역시 증가(增加)되었고, 재령(材齡) 7일(日)과 28일(日)의 강도(强度) 분석(分析) 결과(結果) 고도(高度)의 유의성(有意性)이 있었으며, 재령(材齡) 7일(日)의 압축(壓縮) 강도(强度)가 클수록 인장(引張) 휩강도(强度)도 역시 크게 나타났다. 4. Pozzolith-84는 펄프공업(工業)의 폐기물(廢棄物)인 Lignosulfonic Acid Type이며 이를 실용화(實用化)하면 산업폐기물(産業廢棄物)의 활용(活用)에 유익(有益)하다고 생각된다.

  • PDF