• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.213-214
• /
• 2011

This study investigates the fundamental properties of bast furnace-based mortar made with recycled fine aggregate. Results showed that increasing recycled fine aggregate accelerated setting time, proportionally increased the compressive and flexural strength of mortar specimens. However, it is concluded that for quality and cost effectiveness, the optimum content of this recycled fine aggregate in mortar was found to be 80%.

• 콘크리트학회지
• /
• 제2권3호
• /
• pp.89-95
• /
• 1990

모르타르와 콘크리트의 파괴특성 연구에 있어 할열인장실험 방법의 가능성을 알아보았다. 이를 위하여 할열인장 실험을 통해 초기노치가 주어져 있는 원형 공시체의 크기가 커질 때 모르타르와 콘크리트의 파괴하중의 변화를 구하였다. 이로부터 SEL방법에 의한 수렴정도가 가장 빠른 것으로 나타났으며 SEL방법이 모르타르와 콘크리트의 파괴에너지 및 파괴인성을 구하는 데 매우 효과적인 방법이 될 수 있음을 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.217-222
• /
• 2003

The steel slag, a by-product which is produced during the manufacture of steel by refining pig iron, is mainly used as road materials after aging it. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the expansion of volume. This problem prevents steel slag from being used as aggregate for concrete. But steel slag used in this study was controled by an air-jet method which rapidly cools substance melted at a high temperature. Rapid cooling prevents from generation of free-CaO in steel slag. In this study, properties of steel slag manufactured by air-jet method and mortar used it were investigated. As results of this study, free-CaO contents were controled under 1%. Mortar used this steel slag demanded to lower water contents, higher compressive strength and lower drying shrinkage than the basic mortar in the same condition.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.87-88
• /
• 2016

In the current construction market usage cement and aggregate is increasing continuously. This is progressing serious environmental pollution due to the carbon dioxide generated during cement production. Further, by using a large amount of aggregate, they tend to have even reduced natural resources. As a result, the reduction of carbon dioxide through the United Nations Framework Convention on Climate Change, the energy saving has been positioned as a global trend. Therefore, in this study, instead of fine aggregate fix the cement, by the use to increase the proportion of the tidal flats, to try to reduce the amount of cement and fine aggregate. Accordingly, according to increasing the proportion of the mud flat be analyzed for properties the compressive strength, tensile strength, flow, chloride test, workability of the mortar.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.52-53
• /
• 2016

Mechanical properties and durability of recycled aggregate concrete was known to decrease due to the adhesive mortar of recycled aggregate. But in this study, As the result of chloride diffusion resistance of recycled fine aggregate mortar, the mechanical properties are reduced according to the increase of the substitute ratio of recycled fine aggregate. But the chloride diffusion coefficient was almost same with natural fine aggregate mortar.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.117-122
• /
• 2005

Prepacked polymer mortar that is mainly composed of MMA monomer and used for the patching and restoring materials of concrete structures was developed, and its hardening and strength properties were experimentally surveyed. Results of study show that the permeance of binder into the aggregate was excellent for the case of PMMA mixing ratio of below 10%, the surface hardening inferiority was not generated for the case of the ratio of over 5%. Working time of the prepacked polymer mortar and hardening shrinkage tended to decrease as the PMMA mixing ratio increased. On the other hand, the ratio turned out not to decisively affect on compressive and flexural strengths. Regardless of PMMA mixing content, the adhesive strength was about 2.5 MPa. Occurring the desquamation on the substrate of cement concrete showed the adhesive strength of MMA prepact polymer mortar was excellent.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.209-210
• /
• 2016

Mechanical properties and durability of recycled aggregate concrete was known to decrease due to the adhesive mortar of recycled aggregate. But in this study, As the result of chloride diffusion resistance of recycled fine aggregate mortar, the mechanical properties are reduced according to the increase of the substitute ratio of recycled fine aggregate. But the chloride diffusion coefficient was almost same with natural fine aggregate mortar.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1267-1272
• /
• 2000

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. These are problems on cold weather concrete. One of the solution methods for resolving these problems has been to reduce the freezing temperature of concrete by the use of chemical admixtures called Accelerators for freezing resistance. Therefore, in this study, we executed freezing temperature of mortar, setting and strength properties with using water reducing accelerator and accelerators for freezing resistance which are producted internationally. As a result of this experiment, the freezing temperature of mortar is lower and the setting property is promoted when the admixing content of accelerators for freezing resistance is increased. Moreover, the compressive strength of mortar used accelerators for freezing resistance represented the result which is similar with result of analysis of compressive strength increase with using logistic curve formula, but in the case of plain and using water reducing accelerator, there is no relation between logistic curve formula, maturity and compressive strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.281-284
• /
• 2005

This research is a study on development of section restoration mortar by multi-functional slag aggregate. Compressive strength, flexural strength and other physical properties on five standards are measured to obtain optimal addition rate (of multi-functional aggregate) and to investigate applicability of multi-functional aggregate in developing repair mortar. As the study result, the properties of repair mortar, such as compressive strength and flexural strength etc. are improved by addition of multi-functional aggregate and confirmed reduction effect of air content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.825-828
• /
• 2004

The objective of this study is to examine mechanical properties of ductile fiber-reinforced mortar designed based on micromechanics. This mortar was produced by employing raw materials commercially available in Korea. To verify property level of this material in uniaxial tension, a series of direct tensile tests were performed with varying water cement ratio. In addition to this, flexural tests as well as compressive tests were carried out. Experiments revealed that the fiber reinforced mortar exhibited high ductility represented by strain hardening behavior in uniaxial tension. Significant enhancements of ductility, in terms of strain at peak stress and post-peak behavior, were also observed during the tests in compression and in bending.