• 제목/요약/키워드: Morphology change

검색결과 956건 처리시간 0.028초

소형펀치시험에 의한 5종의 고강도 DP강 수소취성 평가 (Evaluation on Hydrogen Embrittlement of 5 Types of High Strength Dual Phase Steels by Small Punch Test)

  • 최종운;한경구;박재우;강계명
    • 한국가스학회지
    • /
    • 제18권5호
    • /
    • pp.40-46
    • /
    • 2014
  • 전기화학적 방법으로 수소 주입시킨 5종의 고강도 DP강의 수소취성화 정도를 소형펀치시험으로 평가하였다. SP시험 후 SP흡수에너지는, $200mA/cm^2$ 전류밀도 조건의 DP5 시험편에서 수소주입시간이 5hr에서 50hr으로 증가함에 따라 363 kgf-mm에서 209 kgf-mm로 현저히 저하되는 것을 알 수 있었다. 전류밀도와 수소주입시간의 증가에 따라 수소주입량과 SP에너지 저하는 선형적인 상관관계를 갖는 것으로 조사되었다. 또한 SP시험에 의해 생성된 bulb의 높이 변화는 1.79 mm에서 1.59 mm로 낮아지는 것으로 조사되었다. 이는 앞서의 SP 흡수에너지 결과와 유사한 경향으로 나타나, 수소취성평가의 지표로 활용 가능할 것으로 사료된다. 균열 파단부위의 SEM 관찰에서 수소주입량 증가에 따라 파단면은 취성파면 형태로 진행되는 것을 확인할 수 있었다.

비드형 이온교환체의 합성 및 담배 주류연 중 카보닐 화합물의 선택 흡착 특성 (Synthesis of Bead Type lon Exchangers and Selective Adsorption Properties of Carbonyl Compounds in Cigarette Mainstream Smoke)

  • 이존태;박진원;이문수;황건중;황택성
    • 폴리머
    • /
    • 제29권1호
    • /
    • pp.74-80
    • /
    • 2005
  • 담배 주류연 중 카보닐 화합물의 감소를 위한 필터 물질로 비드 형상의 양이온 및 음이온교환체를 glycidylmethacrylate(GMA)와 d9ivinylbenzene(DVB)의 현탁중합에 의해 중합체를 합성한 후 설폰화 반응 및 아민화 반응에 의해 합성하였다. 합성한 이온교환체의 구조는 FT-IR/ATR을 이용하여 확인하였으며 SEM을 이용하여 주류연 흡착에 따른 이온교환체의 표면을 관찰하였다. 또한 이온교환용량, 관능화율 및 담배 주류연 중 카보닐 화합물의 흡착 특성을 확인하였다. 관능화율과 이온교환용량은 공단량체 중 DVB의 함량이 5 wt%에서 최대를 나타내었다. 이온교환체에 의한 담배 주류연 중 카보닐 흡착량은 카보닐기 내의 전자 편재화에 의한 음이온교환반응이 더 용이하여 음이온교환체에서 더 높게 나타났으며, 수분 존재 시 더 많은 흡착량을 나타내었다. 또한 짧은 접촉 시간에서도 높은 흡착량을 가지고 있어 궐련 필터의 적용 가능성을 확인할 수 있었다.

키토산 섬유를 첨가한 종이의 물성 및 기능성의 변화에 관한 연구 (Study on the Change in Physical and Functional Properties of Paper by the Addition of Chitosan)

  • 박성철;강진하;임현아
    • 펄프종이기술
    • /
    • 제42권5호
    • /
    • pp.37-46
    • /
    • 2010
  • This study was carried out to develop new application field and obtain the basic data of mixed paper with wood pulp and chitosan fiber for producing functional paper. Two types of wood pulp, such as SwBKP and HwBKP, were mixed with chitosan fiber. Physical and optical properties, water vapor absorption, air permeability, antibacterial activity and ash were measured. And the surface morphology of manufactured paper was observed using SEM. The results are as follows. It was revealed that density, breaking length, burst index, tear index, folding endurance and brightness were reduced but water vapor absorption and air permeability were on the rise in the structural view of SwBKP according to increasing the chitosan fiber ratio. Those HwBKP added chitosan fiber were great not only in the strength but also water vapor absorption and air permeability except for brightness. The water vapor absorption was lower and the air permeability was higher in the HwBKP added various chitosan fiber ratios than those with no chitosan fiber. It is estimated that these properties were related with various mixed rate of chitosan fiber. Particularly, air permeability was strongly dependent on the mixed rate of chitosan fiber. The chitosan fiber has superior antibacterial property, comparing with wood fiber. Adding chitosan fiber to the wood pulp was found to have an excellent antibacterial activity, more than 90%. The ashes were determined within 0.5%. Special bonds between chitosan fiber and wood pulp was observed by SEM and it means that the chitosan fiber were combined equally in the interior of wood pulp. In conclusion, mixing wood pulp with chitosan fiber can not only improves the quality of paper but also extend the usage of paper as a functional paper by using inherent property of chitosan. After all, production of functional paper added chitosan fiber is expected for new valuable industry of paper.

PZT 박막 캐퍼시터의 특성에 기여하는 PZT-전극계면층의 영향 (Effects of PZT-Electrode Interface Layers on Capacitor Properties)

  • 김태호;구준모;민형섭;이인섭;김지영
    • 한국재료학회지
    • /
    • 제10권10호
    • /
    • pp.684-690
    • /
    • 2000
  • Metal-Ferroelectric-Metal(MFM) 구조의 개퍼시터에서 $Pb(Zr,Ti)O_3(PZT)$-전극 계면층이 PZT 박막 특성에 기여하는 영향을 알아보기 위하여 Pt/PZT/계면층/Pt/$TiO_2/SiO_2$/Si 구조의 캐퍼시터를 제작하였다. 계면층으로 사용될 물질들 중에서 $PbTiO_3(PT)$ 층을 sol-gel 방법으로 형성하였으며, PbO, $ZrO_2,\;TiO_2$ 층들을 reactive sputtering 방법으로 형성하였다. PZT박막을 구성하는 원소들로 이루어진 단순 산화물들의 특성을 평가하기 위하여 PbO, $ZrO_2,\;TiO_2$를 계면층으로 사용하여 $600^{\circ}C$에서 열처리를 실시하였고, 이 경우에는 $TiO_2$가 가장 우수하게 PZT의 결정립 크기를 미세하게 하는 효과를 보였으나, 두께가 증가함에 따라 표면 거칠기가 증가하고 anatase 상으로 남기 때문에 강유전특성이 열화되었다. 반면에 PT 박막을 계면층으로 사용한 경우에는 결정립 크기의 감소와 더불어 전기적인 특성도 향상되었다. 또한 PZT의 핵생성 위치를 판단하기 위하여 PT 삽입층의 위치를 변화하며, 실험한 결과, 하부전극과 PZT 박막의 계면에 PT 삽입층을 형성하였을 경우에 가장 효과적인 seed로서의 역할을 하였다.

  • PDF

LBL법에 의해 TiO2막이 코팅된 광촉매 글라스 비드 제조 (Fabrication of Photocatalyst Glass Beads Coated with TiO2 Thin Film by a Layer-by-Layer Process)

  • 이지선;채유진;이미재;김세기;황종희;임태영;현승균;김진호
    • 한국재료학회지
    • /
    • 제22권7호
    • /
    • pp.379-383
    • /
    • 2012
  • $TiO_2$ thin films consisting of positively charged poly(diallyldimethylammonium chloride)(PDDA) and negatively charged titanium(IV) bis(ammonium lactato) dihydroxide(TALH) were successfully fabricated on glass beads by a layer-by-layer(LBL) self-assembly method. The glass beads used here showed a positive charge in an acid range and negative charge in an alkaline range. The glass beads coated with the coating sequence of(PDDA/TALH)n showed a change in the surface morphology as a function of the number of bilayers. When the number of bilayers(n) of the(PDDA/TALH) thin film was 20, Ti element was observed on the surface of the coated glass beads. The thin films coated onto the glass beads had a main peak of the (101) crystal face and were highly crystallized with XRD diffraction peaks of anatase-type $TiO_2$ according to an XRD analysis. In addition, the $TiO_2$ thin films showed photocatalytic properties such that they could decompose a methyl orange solution under illumination with UV light. As the number of bilayers of the(PDDA/TALH) thin film increased, the photocatalytic property of the $TiO_2$-coated glass beads increased with the increase in the thin film thickness. The surface morphologies and optical properties of glass beads coated with $TiO_2$ thin films with different coating numbers were measured by field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD) and by UV-Vis spectrophotometry(UV-vis).

한국산 바지락(Ruditapes philippinarum) 혈구의 분류 (The Morphology of the Hemocytes of the Clam, Ruditapes philippinarum (Mollusca: Bivalvia))

  • 강선구;박성우;김영길
    • 한국어병학회지
    • /
    • 제13권2호
    • /
    • pp.129-136
    • /
    • 2000
  • 한국산 바지락(Ruditapes philippinarum) 혈구에 의한 생체 방어 기작의 과정을 이해하기 위해 혈구의 분류와 혈구의 계절적 변동을 조사하였다. 바지락은 1998년 6월부터 1년간 전북 고창군 줄포만에서 채집하여 실험에 사용하였다. 후패각근에서 채혈한 혈구를 형태학적 관찰과 탐식능을 조사한 결과 과립을 가진 호염기성과립구, 호산성과립구 그리고 노쇠한 세포인 fibrocyte의 3종류와 과립이 없는 무과립구로 구분되었다. 초미세구조의 관찰에 의한 과립구의 특징으로는 전자밀도가 높은 공포가 무과립구보다 훨씬 많았다. 무과립구는 작은 액상 공포가 세포질내에 산재해 있었다. 광학현미경적 식작용 관찰에서는 zymosan을 탐식한 혈구의 핵은 세포질의 가장 자리로 편재되었으며 식작용 비율에서는 호산성과립구가 호염기성과립구보다 높은 비율을 나타내었고 무과립구는 거의 탐식하지 않았다. 월별 혈구수에서 총혈구수는 4~7월이 많았으며 10~12월에 적게 나타났다. 각 혈구수의 조성은 호염기성과립구가 50-60%로 가장 높았고 호산성과립구는 25-40%, 무과립구는 10-20%의 순으로 나타났다.

  • PDF

효모에서 분리한 멜라닌 생성 억제 물질의 세포분화 억제 (Inhibition of Melanoma Differentiation by Melanogenesis Inhibitor Isolated from Yeast)

  • 최태부;이승선;정호권;오철
    • 대한화장품학회지
    • /
    • 제31권1호
    • /
    • pp.25-33
    • /
    • 2005
  • 본 연구에서는 효모에서 분리한 melanoston이라고 명명된 멜라닌 생성을 억제하는 물질의 작용 기전을 밝히기 위한 것이다. $\alpha$-MSH를 처리한 B16 melanoma 세포에서 melanoston은 tyrosinase mRNA 발현양을 $10\%$ 정도 저해되는데 그쳤으며 western blotting을 이용한 단백질 측정에서도 이와 비슷한 정도의 단백질 생성 억제를 보였다. 그러나 B16 세포 배양액에 melanoston을 첨가할 경우 세포내 tyrosinase 활성이 $30\%$까지 감소되는 것으로 나타나 melanoston이 tyrosinase inhibitor는 아니지만 세포내 tyrosinase 활성화(activation) 과정을 억제하는 것으로 추측할 수 있었다. 또한 광학 현미경을 이용한 morphology 관찰에서 $\alpha$-MSH를 처리한 세포에서는 많은 dentrite가 형성되면서 세포분화가 일어나는 반면 melanoston를 처리한 경우에는 dendrite가 감소하면서 세포형태가 대조군과 비슷하게 회복되는 것을 알 수 있었다. 또 FITC-anti-tyrosinase-Ab를 이용한 형광염색을 통해서는 $\alpha$-MSH만 처리한 세포에서는 tyrosinase의 분포가 dendrite를 포함한 세포 전체로 퍼져나가는 것을 관찰 할 수 있었고 $\alpha$-MSH와 melanoston을 동시에 처리한 세포에서는 대조군과 비슷하게 tyrosinase가 핵 주변에서만 관찰되어 melanoston이 B16 melanoma 세포의 분화과정에서 이를 억제하는 효과를 주고 있음을 알 수 있었다. 이상의 결과들을 종합해 볼 때 melanoston은 $\alpha$-MSH에 의해 진행되는 B16 세포의 분화를 억제하고 이 과정에서 멜라닌 생성의 주된 효소인 tyrosinase의 활성화를 억제하며 결과적으로는 멜라닌 생성을 저해하는 것으로 사료된다.

Co2Z-type Barium Hexaferrite의 합성방법에 따른 결정구조 및 자기적 특성 (Structure and Magnetic Properties on Synthesis Route of Co2Z-type Barium Hexaferrite)

  • 백인승;남인탁
    • 한국자기학회지
    • /
    • 제24권1호
    • /
    • pp.1-10
    • /
    • 2014
  • $Co_2Z$-type hexaferrite 시편을 다양한 합성법을 이용하여 제조하였다. 수열합성법을 이용하여 M-type, $Co_2Y$-type, $Co_2Z$-type을 제조하였으며, 제조된 M-type과 $Co_2Y$-type을 출발물질로 하여 고상반응법(ball milling)과 수열합성법(hydrothermal)으로 $Co_2Z$-type을 제조하였다. 제조된 시편의 결정구조와 미세구조 자기적 성질은 XRD, FESEM, VSM, impedance analyzer를 이용하여 조사하였다. M-type과 $Co_2Y$-type은 단일상의 결정구조를 얻을 수 있었다. 여러 합성법 중에 M+Y ball milling, M+Y hydrothermal에서 제조한 시편이 $Co_2Z$-type hexaferrite의 단일상과 대체로 일치하는 것을 알 수 있었으며, $Co_2Z$-type의 모든 시편들은 이론적인 포화 자화값(50 emu/g)과 비슷한 값을 나타내었다. 소결한 시편들의 투자율은 시약을 precusor로 하여 제조한 $Co_2Z$-type의 투자율이 가장 높았으며, 열처리 온도가 증가함에 따라 투자율은 낮아졌다. 다른 합성법에서는 열처리 온도에 따른 변화가 거의 나타나지 않는 것을 확인할 수 있었다.

철에 의한 버네사이트의 결정도 및 화학적 활성의 변화 (Crystallinity and Chemical Reactivity of Bimessite(δ-MnO2) Influenced by Iron)

  • 김재곤
    • 한국토양비료학회지
    • /
    • 제32권4호
    • /
    • pp.327-332
    • /
    • 1999
  • 산화망간이 영양소물질과 오염물질과의 반응 및 망간이 식물의 필수 미량원소 등으로 인해 토양학에서 산화망간은 중요한 연구의 대상이 되어왔다. 토양 내에서 가장 흔한 산화망간 광물중의 하나인 버네사이트를 철의 존재 하에서 합성하였다. 토양 내에서 흔한 원소의 하나인 철이 버네사이트의 결정도, 형태 및 화학적 활성에 미치는 영향을 X-선회절, 전지현미경, 양이온 교환능력 및 크롬 산화력을 이용하여 연구하였다. 침전용액내의 철의 함량이 증가할수록 버네사이트의 결정도와 입자의 크기는 감소하였다. 침전된 버네사이트는 낮은 철의 농도에서 육각 판상형이 우세하였으나 농도가 증가 할 수록 미세입자로된 입단이 증가하였다. 그리고 크롬 산화능력은 철의 농도가 증가함에 따라 증가하였다. 양이온 치환능력은 철의 농도와 상관관계가 없었다. 침전용액속의 철은 버네사이트의 결정핵의 형성을 증가시켰고 표면흡착에 의해 결정의 성장을 방해하였다. 철은 토양 망간단과 내에서 산화철과 산화망간의 공존으로 미루어 보아 토양내의 버네사이트의 작은 입자, 낮은 결정도 및 높은 화학적 활성에 기여한 것으로 사료된다. 본 연구에서 입증된 버네사이트의 높은 양이온 교환 능력과 산화력은 버네사이트를 환경과 농업에 활용 가능성이 있음을 제시해준다.

  • PDF

임플란트 표면에서 배양된 정상인 조골세포의 증식 및 분화에 미치는 니코틴의 영향 (The Effect of Nicotine on the Proliferation and Differentiation of Normal Human Osteoblast at the Surface of Implants)

  • 안태웅;이종헌
    • 대한구강악안면병리학회지
    • /
    • 제42권5호
    • /
    • pp.111-118
    • /
    • 2018
  • Nicotine of tobacco component has a controversial impact in the clinical outcome of dental implants. Although numerous nicotine effects on bone healing around implants have been presented, it is rarely reported in vitro study about normal human osteoblast(NHost) from oral and maxillofacial area at the surface of implants. The purpose of the present study was to evaluate the effect of nicotine on the proliferation and differentiation response of NHost to plasmatic and salivary levels of nicotine reported in smokers at the surface of screw-type plasma-sprayed titanium implants. NHosts were seeded on the surface of titanium implants and cultured for 21 days in ${\alpha}-MEM$ supplemented with 10% FBS, 50mg/ml ascorbic acid, 5mM ${\beta}$-glycerophosphate and 100nM dexamethasone. Seeded implants were exposed to various nicotine concentration(0.05-0.5mg/ml) from 1 to 21 days, and characterized for cell morphology, proliferation, differentiation, alkaline phosphatase(ALP) activity and ionized calcium concentration(Cai) of medium. Continuous exposure to higher nicotine concentration(above 0.3mg/ml) induced a dose- and time-dependent vacuolation of the cytoplasm, and a tendency to detach from the implant surface. 0.05mg/ml(lower nicotine concentration) did not cause significant effects in the cell proliferation and ALP activity. 0.1-0.2mg/ml caused evident dose-dependent effects in increased cell proliferation, ALP activity and earlier onset of matrix mineralization at levels up to 0.2mg/ml, while a dose-dependent inhibitory effect at 0.3-0.5mg/ml. Cai concentration of control group was decreased at 14 days. Increased Cai concentration at 0.1-0.2mg/ml, decreased Cai concentration at 0.3mg/ml and no change at 0.5mg/ml during the culture period were seen. It suggested that nicotine concentration could paly an role in modulating NHost activity as a contributing factor associated with proliferation and differentiation of NHost at the surface of implants.