• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.130-134
• /
• 2017

Organic aerosols dispersed in the atmosphere likely undergo phase separation. Such internally mixed particles are often described as comprising an organic phase and an aqueous phase separately. We studied the morphology of two liquid separated aerosols in the sub-microscale by using a simple thermodynamic model with Russian doll geometry. The morphology of particles can be easily predicted from the simple criteria on the surface tension and two algebraic equations (the volume constraint and Young equation). This result may give the potential explanation about the complex morphology of the organic airborne particles.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.71-74
• /
• 2006

Transport and tunneling measurements of nanostructured superconducting thin films are presented. To understand the effects of film morphology on their superconducting properties, thermal annealing experiments have been performed. The transition temperature increases with thermal annealing temperature towards the bulk value. Also, thermal annealing results in a shift of transverse phonon mode. These can be understood with changes in film morphology and suggest its importance on the superconducting state properties.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.43 no.1
• /
• pp.16-21
• /
• 2021

The silkworm cocoon has recently attracted the attention of researchers because of its usefulness as a biomedical material (e.g., usage in the development of the membrane for guided bone regeneration and usage as a starting material for the fabrication of natural silk nonwoven fabric). The silkworm variety and strain have been reported as one of the important factors affecting the structure and properties of silk materials. This study examines the morphology and the molecular conformation of the silkworm cocoon at different cocoon measurement points, as well as the effect of the silkworm strain and rearing season on the morphology and crystallinity of the silkworm cocoon. The results show that the morphology of the outside of the cocoon does not differ depending on the cocoon measurement points, but that of the inside does. The silkworm cocoon crystallinity is not affected by the cocoon division. Interestingly, the crystallinity of the outside of the Jam101 cocoon differs depending on the rearing season, whereas it does not in other silkworm strains.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.39-48
• /
• 2006

This paper is proposed the wavelet morphology algorithm with the spatial auto-object segmentation concept and the clustering concept. When it is segmented the color face by using the proposed algorithm, it is made to the simple image. Also, it is used the spatial quality in order to segment and detect the image as a real time without the user's manufacturing. This removed a small part that is regarded as a noise in image by HSV color model and applied the wavelet morphology to remove a part excepting for the face image. In this paper, it is made a comparison between the wavelet morphology algorithm and the morphology algorithm. And It is showed to accurately detect the face object parts in the image appled to HSV color space model.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.2
• /
• pp.54-63
• /
• 1994

Mg thin films were prepared on SPCC(cold-rolled steel) substrates by vasuum evapoaration and ion-plating. The influence of argon gas pressure and substrates bias voltage on the crystal orientation and morphology of the film was determined by using X-ray diffraction and scanning electron micrography (SEM), respectively. And the effect of crystal orientation and morphology of the Mg thin films on corrosion behavior was estimated by measuring the anodic polarization curves in deaerated 3% NaCl solution. The crystal orientation of the Mg films deposited at high argon gas pressure exhibited a (002) preferred orientation, regardless of the substrate bias voltage. Film morphology changed from a columnar to a granular structure with the increase of argon gas pressure. The morphology of the films depended not only on argon gas pressure but also bias voltage ; i.e., the effect of increasing bias voltage was similar to that of decreasing argon gas pressure. The influences of argon gas pressure and bias voltage were explained by applying the adsorption inhibitor theory and the sputter theory. And also, this showed that the corrosion resistance of the Mg thin films can be changed by controlling the crystal orientaton and morphology.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.2
• /
• pp.100-104
• /
• 2006

In this study, we investigated the relationship between the morphology and the rheological properties of Penicillium citrinum to improve the production of neo-fructosyltransferase (neo-FTase). In a 2.5 L bioreactor culture of P. citrinum, it was observed that agitation speed and aeration rate had significant effects on the production of neo-FTase and that maximum cell mass and neo-FTase production obtained at 500 rpm and 1.5vvm were 8.14 g/L and $53.2{\times}10^{-3} U/mL$, respectively. Cell mass and neo-FTase production increased to 91.53 and 25.17%, respectively. In the morphology and rheology studies, P. citrinum showed a typical pellet morphology that was explained by a shaving mechanism; this phenomenon was significantly affected by carbon sources. The rheology of neo-FTase fermentation by P. citrinum was dependent on cell growth and fungal morphology.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.6
• /
• pp.312-324
• /
• 2008

In this study, the functional property as a super abrasive material was secured for CBN powder by the electroless Ni-P plating on the surface of the particle. The plating solution has been prepared to control the surface morphology by regulating surfactants and process conditions. The effects of processing parameters on the surface morphology of CBN powder was discussed. The results are summarized as follows; A stable plating tendency was achieved from 1 hour after quantitatively dropping reducing agent. It was observed that more than 50% of the weight gain was obtained by Ni-P coating on the surface of CBN super abrasive powder. The morphology of the Ni-P coating layer is consisted of botryoidal and spiky type and it could be controlled by regulating processing parameters. Superior characteristic in terms of surface morphology was found in the nonionic surfactant XL-80N. It was found that XL-80N considerably decreased surface tension of CBN powder and Ni-P alloy surface then enhance wettability as well as plating rate. Metal coated CBN powder as a raw material of resin bond wheel has been developed through this investigation.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.46.2-46.2
• /
• 2014

Galaxy morphology is involved complex effects of both secular and non-secular evolution of galaxies. Although it is a final product of a galaxy evolution, it may give a clue for the process that the galaxy suffer. Galaxy clusters are the sites where the most massive galaxies are found, and the most dramatic merger histories are embedded. Morphology study in nearby universe, e.g. Virgo cluster, is well established, but for clusters at z ~ 0.1 it is only focused on bright galaxies due to observational limits. Our optical deep imaging of 14 Abell clusters at z = 0.014 - 0.16 using IMACS f/2 on a Magellan Badde 6.5-m telescope and MegaCam on a 3.8-m CFHT enable to classify detailed morphology. For the galaxies in our data, we investigated their morphology with several criteria related to secular or merger related evolution. Our research on detailed morphology of thousands of galaxies through deep imaging would give a general census of cluster galaxies and help to estimate the evolution of cluster galaxies.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1829-1833
• /
• 2012

Titania spheres were synthesized using binary ionic liquids to examine the electrocatalytic activity in acid solution. The morphology of $TiO_2$ particles was significantly different with the composition of ionic liquids. Among the binary ionic liquids, four set of mixtures led to the formation of $TiO_2$ sphere with various sizes. The morphology and structure of $TiO_2$ particles were characterized by XRD, $N_2$ physisoption and SEM analysis. All samples possessed an anatase phase after calcinations at $500^{\circ}C$. The structural properties of the samples were varied significantly with the morphology. In cyclic voltammograms, the morphology of $TiO_2$ spheres affected the electrocatalytic activity in water electrolysis. Among the samples, [Omim][$BF_4$]+[Hmim][$BF_4$] was the most effective ionic liquid to synthesize $TiO_2$ sphere with optimum morphology showing the highest electocatalytic performance.

• Clinical and Experimental Reproductive Medicine
• /
• v.41 no.3
• /
• pp.132-136
• /
• 2014

Objective: The presence of sperm-head vacuoles has been suspected to be deleterious to the outcomes of assisted reproductive technology (ART). It is difficult to accurately distinguish morphologically abnormal sperm with vacuoles under a light microscope. This study was performed to analyze the result of the observation of sperm-head vacuoles using Papanicolaou staining under a light microscope and whether the male partner's age affects these vacuoles. Methods: Sperm morphology with vacuoles was evaluated using Papanicolaou staining and observed under a light microscope ($400{\times)$) in 980 men. The normal morphology was divided into three categories (group A, <4% of normal morphology; group B, 4%-14% of normal morphology; and group C, >14% of normal morphology). The criteria for the sperm-head vacuoles were those given in the World Health Organization manual. For the analysis of the age factor, the participants were divided into the following groups: 26-30 years, 31-35 years, 36-40 years, 41-45 years, and 46-50 years. Results: The percentage of sperm-head vacuoles increased with normal sperm morphology (group A vs. groups B, C) (p<0.05). In the case of the age factor, a statistically significant difference was not observed across any of the age groups. Conclusion: A majority of the sperm-head vacuoles showed a statistically significant difference among normal morphology groups. Therefore, we should consider the probability of the percentage of sperm-head vacuoles not increasing with age but with abnormal sperm morphology. A further study is required to clarify the effect of the sperm-head vacuoles on ART outcomes.