• Clinical and Experimental Reproductive Medicine
• /
• v.22 no.3
• /
• pp.293-299
• /
• 1995

Objective: To investigate the effects of sperm morphology and their co-incubation with oocytes on the outcome of IVF and ICSI. Design: Strict morphology of washed sperm was assessed by Diff-Quick staining method before or after insemination. And the relationships between strict morphology and outcome (fertilization, embryo development and pregnancy) of IVF(with co-incubation) and ICSI (without co-incubation) were determined. Patients: Two-hundreds-and-sixty-three cycles of IVF and ninety-six cycles of ICSI were analyzed in order to clarify the influence of strict sperm morphology of spermatozoa on outcome of IVF and ICSI. These were divided into four groups. according to fertilization method and sperm morphology(Group 1: IVF, ${\geq}$12%, n:227; Group 2: IVF, <12%, n:36; Group 3: ICSI, ${\geq}$ 12%, n=48; Group 4: ICSI, <12%, n=48). Results: The fertilization rates of better morphology groups were higher than those of poor groups: Group 1(68.1%) > Group 2(62.1%), Group 3(78.1%) > Group 4(71.5%). There was no difference in embryo cleavage rates among four groups (>90%), Regarded with the good embryo rates, Group 1(56.8%) was significantly higher than Group 2(42.3%)(P<0.01), but there was no difference between Group 3(64.7%) and Group 4(61.2%). The pregnancy rates were also higher in better morphology groups as well as fertilization rates: Group 1(34.8%)> Group 2(16.7%)(p<0.05), Group 3(40.0%) > Group 4(23.0%)(p=0.08). Conclusion: Co-incubation with poor morphology sperm might adversely affect the quality of embryos. And strict sperm morphology may represent the ability to establish successful pregnancy. In short, the strict sperm morphology can be a good predictor of IVF and ICSI outcome.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.236-248
• /
• 2013

In this study, 37 subjects with normal facial shape and normal occlusion are classified and reference value for such classification was investigated. Difference in position of maxillary incisor was studied according to the cl assification. Moreover, by investigating correlation between factors affecting forehead morphology and positio n of maxillary incisor, following results have been obtained. 1. Morphology of forehead can be classified as angular type, round type, straight type, and concave type. 2. There were no specific reference value for evaluation of forehead morphology but possibilities of evaluating forehead morphology using S value and forehead length (Tri-Gla) still remain. 3. There were no correlation between forehead morphology and position of maxillary incisor. 4. Forehead inclination and Andrew analysis show statistically significant negative correlation. That is, as forehead inclination increases, maxillary incisor is positioned posteriorly and this relationship can be shown as following equation, Andrew analysis = -0.39*Forehead inclination.

• Journal of The Korean Astronomical Society
• /
• v.50 no.4
• /
• pp.111-124
• /
• 2017

The environmental dependence of the morphology of dwarf galaxies in isolated satellite systems is analyzed to understand the origin of the dwarf galaxy morphology using the visually classified morphological types of 5836 local galaxies with $z{\leq}0.01$. We consider six sub-types of dwarf galaxies, dS0, dE, $dE_{bc}$, dSph, $dE_{blue}$, and dI, of which the first four sub-types are considered as early-type and the last two as late-type. The environmental parameters we consider are the projected distance from the host galaxy ($r_p$), local and global background densities, and the host morphology. The spatial distributions of dwarf satellites of early-type galaxies are much different from those of dwarf satellites of late-type galaxies, suggesting the host morphology combined with $r_p$ plays a decisive role on the morphology of the dwarf satellite galaxies. The local and global background densities play no significant role on the morphology of dwarfs in the satellite systems hosted by early-type galaxies. However, in the satellite system hosted by late-type galaxies, the global background densities of dE and dSph satellites are significantly different from those of $dE_{bc}$, $dE_{blue}$, and dI satellites. The blue-cored dwarf satellites ($dE_{bc}$) of early-type galaxies are likely to be located at $r_p$ > 0.3 Mpc to keep their cold gas from the ram pressure stripping by the hot corona of early-type galaxies. The spatial distribution of $dE_{bc}$ satellites of early-type galaxies and their global background densities suggest that their cold gas is intergalactic material accreted before they fall into the satellite systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.57-58
• /
• 2008

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.257-258
• /
• 2002

The surface morphology of oil-lubricated surface for hydraulic piston motor is believed to be extremely effective in contact mechanics. adhesion. friction and wear. In order to describe morphology of various rubbed surface on driving condition, the wear test was carried out under different experimental conditions in oil-lubricated system. And fractal descriptors was applied to rubbed surface of hydraulic members with image processing system. These descriptors to analyze surface structure are fractal dimension. Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Morphology of rubbed surface can be effectively obtained by fractal dimension.

• KSTLE International Journal
• /
• v.3 no.2
• /
• pp.75-78
• /
• 2002

The surface morphology of oil-lubricated surfaces fer hydraulic piston motors is believed to be extremely effective in contact mechanics, adhesion, friction and weak In order to describe morphology of various rubbed surfaces on driving conditions, the wear test was carried out under different experimental conditions in an oil-lubricated system. And fractal descriptors were applied to rubbed surfaces of hydraulic members and analyzed through an image processing system. These descriptors to analyze surface structure are fractal dimension. Surface fractal dimensions can be determined by sum of intensity difference of surface pixel. The morphology of rubbed surfaces can be effectively obtained by fractal dimension.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.165-169
• /
• 2008

The effect of processing conditions on the morphology of polyphenyleneoxide (PPO)/polyamide 6 (PA 6) blends were investigated. Injection molded part with a $15cm{\times}15cm{\times}3.2mm$ sized plate was molded with various injection molding conditions, and the morphology of the injection molded blends was investigation by using SEM. As a result, we found that molded part shows very complicated morphology because it has experienced complex thermal, shear and elongation history during the processing.

• Carbon letters
• /
• v.13 no.4
• /
• pp.226-229
• /
• 2012

Polyacetylene (PA) films with vertically aligned fibril morphology were synthesized in homeotropic nematic liquid crystal (N-LC) solvent by using a magnetic field of 5 Tesla as an external perturbation. Scanning electron microscope (SEM) photographs indicated that the lengths of fibrils from the substrate were $5-35{\mu}m$, depending on polymerization time. Carbonization was carried out using iodine-doped PA film and a morphology-retaining carbonization method. From the SEM results, we confirmed that the vertical morphology of the PA remains unchanged even after carbonization at $800^{\circ}C$. The weight loss of the films due to carbonization at $800^{\circ}C$ is about 20% of the weight of the film before iodine doping. It is expected that vertically aligned carbon might be a precursor for preparing vertical graphite materials, which materials could be useful for electrochemical energy storage and cell electrodes.

• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.444-452
• /
• 2013

Operation time of a function or procedure is a thing that always needs to be optimized. Parallelizing the operation is the general method to reduce the operation time of the function. One of the most powerful parallelizing methods is using GPU. In image processing field, one of the most commonly used operations is morphology operation. Three types of morphology operations kernel, na$\ddot{i}$ve, global and shared, are presented in this paper. All kernels are made using CUDA and work parallel on GPU. Four morphology operations (erosion, dilation, opening, and closing) using square structuring element are tested on MRI images with different size to measure the speedup of the GPU implementation over CPU implementation. The results show that the speedup of dilation is similar for all kernels. However, on erosion, opening, and closing, shared kernel works faster than other kernels.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.62-68
• /
• 2012

Cellulose was electrospun over water collector and the cellulose solution was prepared using N-methyl-morpholine N-oxide/water(nNMMO/$H_2O$). The morphology of electrospun cellulose was investigated by scanning electron microscopy (SEM). SEM images showed that the fiber formation depended on processing parameters such as solution concentration, applied electric field strength, solution feeding rate and temperature of water in coagulation bath. High concentration, low temperature of water bath, and low feeding rate were more favorable to obtain fiber morphology. All the variables affected on the fluidity of the cellulose solution and diffusion of NMMO. Low fluidity and fast diffuision of NMMO was critical for obtaining fiber morphology.