• Membrane and Water Treatment
• /
• v.5 no.1
• /
• pp.41-56
• /
• 2014

A series of microporous PVDF membranes were prepared by isothermal immersionprecipitation of PVDF/TEP casting dopes in both soft and harsh coagulation baths. Morphologies of the membranes' top surfaces were found to depend strongly on the bath strength, which could be controlled by the TEP content in the bath. By changing the bath gradually from pure water to 70% TEP, the top surface evolved from a dense skin-like (asymmetric) to a totally open porous morphology (symmetric). The latter structure could similarly be obtained by precipitation of the same dope in an alcoholic bath, e.g., 1-butanol. Membrane distillation processes to desalt sodium chloride aqueous solutions were conducted using various prepared membranes and two commercial microporous membranes, PTFE (Toyo, Japan, code: J020A330R) and PVDF (GE, USA, code: YMJWSP3001). The permeation fluxes were compared and correlated with the morphologies of the tested membranes.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.8
• /
• pp.371-375
• /
• 2001

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area (${\pi}$-A) isotherms. The surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy(AFM) and UV-vis spectroscopy, respectively. And, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity and the dielectric constant. In the surface morphologies, physicochemical and electrical properties of polyurethane derivatives LB films, the properties is different as to the polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.51.1-51.1
• /
• 2016

We revisited a recent dust emission observed at a main-belt asteroid P/2010 A2 in terms of dynamical properties of dust particles and large fragments. This is a continued research that we made a presentation at the Korean Astronomical Society 2016 Spring Meeting, but we have strengthened the dynamical analysis of the ejecta to afford the conclusive evidence for the enigmatic phenomenon. We thus constructed a model to reproduce the morphology of the dust cloud based on the dust dynamics, and succeeded in reproducing the observed morphologies in different epochs over several years. For further analysis, we reconstructed the proper motion of large fragments with respect to the dust emission source estimated from our dust model. We found that (i) the dust cloud morphologies and (ii) observed trajectories of fragments are reasonably explained only when we assumed that both were ejected from a position where no object was detected from any observations. This result suggests that the original body was shattered by an impact, leaving only debris into space. In this presentation, we will compare our results with impact laboratory studies and provide an impact interpretation of the P/2010 A2 activity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.147-150
• /
• 2002

The electron field emission properties of amorphous carbon (a-C) films deposited using a RF magnetron sputtering system have been improved by introducing a simple method of argon plasma treatment at room temperature. Surface morphologies and structural properties of the a-C films were investigated by scanning electron microscopy and Raman spectroscope, respectively. Structural properties and surface morphologies of the a-C films were changed by argon plasma treatment. The emission properties improved with the plasma treatment.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.609-612
• /
• 2011

Amphiphilic (porphyrin)Sn$(OH)_2$ molecular building block can directly translate into well-defined solid-state microcrystalline structures. The crystalline diamond plates are obtained from ethanol and crystalline square plates are grown from methanol solution. With a simple synthetic manipulation during the microcrystal growth, the morphologies can be controlled by adopting different molecular packing. Consequently, morphologies of microcrystals have been diversified. Furthermore, the macroscopic crystals were obtained in the presence of cetyltrimethylammonium bromide (CTAB).

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.20-25
• /
• 1995

Diamond films were prepared by a hot filament vapor deposition onto polycrystal silicon nitride substrates. Different kinds of silicon nitride containing CaO and $Fe_{2}O_{3}$ were manufactured to investigate the impurity effect of substrate on the morphology of diamond films and their wear behaviors. Nucleation rates and morphologies of diamond films deposited on various kinds of silicon nitride were compared. The highest nucleation rate was observed in a substrate containing 1% of CaO. Wear tests were performed with a silicon nitride ball on the disk geometry to investigate the tribological behavior of diamond film against silicon nitride. This study demonstrated that different morphologies of diamond film due to substrate impurities produced different wear behavior against silicon nitride.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.73.1-73.1
• /
• 2011

An understanding of the ultraviolet (UV) properties of nearby galaxies is essential for interpreting images of high redshift systems. In this respect, the prediction of optical-band morphologies at high redshifts requires UV images of local galaxies with various morphologies. We present the simulated optical images of galaxies at high redshifts using diverse and high-quality UV images of nearby galaxies obtained through the Galaxy Evolution Explorer (GALEX). We measured CAS (concentration, asymmetry, clumpiness) as well as Gini/M20 parameters of galaxies at near-ultraviolet (NUV) and simulated optical images to quantify effects of redshift on the appearance of distant stellar systems. We also discuss the change of morphological parameters with redshift.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.458-460
• /
• 2000

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area ($\pi$-A) isotherms. And, the surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. Also, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity, the dielectric constant and activation energy. In the surface morphologies, physicochemical, electrical properties of polyurethane derivatives LB films, the properties is different as to the Polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.133-137
• /
• 2016

The surface treatment of cover glass for conversion efficiency of photovoltaic cell is important to reduce reflectivity and to increase the incident light. In this work, random textured anti glare (RTAG) glass was prepared by wet surface coating method. Optical properties due to the changes of surface morphology of RTAG glass were compared and conversion efficiency of photovoltaic cell was researched. Grain size and changes of surface morphologies formed with surface etching time greatly affected optical transmittance and transmission haze. Current density (Jsc) were high at the condition when surface morphologies reflection haze were low and transmission haze were high. Jsc was $40.0mA/cm^2$ at glancing angle of $90^{\circ}$. Incidence light source was strongly influenced by surface treatment of cover glass at high incidence angle but was hardly affected light source at the low angle of incidence.

• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.149-153
• /
• 2016

Thermal oxidation has significant potential for use in synthesizing metal-oxide nanostructures from metallic materials. However, this method has limited applicability to the synthesis of multi-morphology NiO from Ni foil. Techniques consisting of mechanical and chemical approaches were used to pre-treat the Ni foil (prior to oxidation) to promote the formation of nanowires and nanoplates on the NiO layer. These morphologies were realized on the Ni foils scratched by sand paper and a knife, respectively, and subsequently heat-treated at $500^{\circ}C$ for 24 h. Small nanowires (diameter: <10 nm) formed on the Ni foil treated by absolute $HNO_3$ and then oxidized at $500^{\circ}C$ for 24 h. The formation of various morphologies (on the pre-treated Ni foil), which differ from that formed in the case of pristine Ni foil after oxidation, may be attributed to the surface melting phenomenon that occurs during the nucleation process.