• 지질공학
• /
• 제32권1호
• /
• pp.85-99
• /
• 2022

Rock discontinuities, as weak interfaces in rock, control mechanical properties of rock mass. Presence of discontinuities complicates the engineering properties of rock, which is the root of anisotropy and heterogeneity that have nonnegligible influences on the rock engineering. Morphological characteristics of discontinuities in natural rock are an important factor influencing the mechanical properties, particularly roughness, of discontinuities. Therefore, the accurate measurement and characterization of morphologies of discontinuities are preconditions for studying mechanical properties of discontinuities. Taking discontinuities in red sandstone as research objects, the research obtained three-dimensional (3D) morphologies of discontinuities in natural rock by carrying out 3D morphological scanning tests. The waviness and roughness were separated from 3D morphologies of rock discontinuities through wavelet transform. In addition, the calculation method for the overall slope root mean square (RMS) as well as slope RMSs of waviness and roughness of 3D morphologies of discontinuities considering the shear direction was proposed. The research finally determined an evaluation method for 3D morphologies of discontinuities by quantitatively characterizing 3D morphologies with the mean value of the three slope RMSs.

• 천문학회보
• /
• 제35권1호
• /
• pp.70.1-70.1
• /
• 2010

We present the far-ultraviolet (FUV) emission line morphologies in the whole region of the supernova remnant G65.3+5.7 using the FIMS/SPEAR data. The morphologies of the C IV ${\lambda}{\lambda}1548$, 1551, $H2{\lambda}1608 $, He II ${\lambda}1640$, and O III] ${\lambda}{\lambda}1661$, 1666 lines appear to correlate clearly with the optical emission line images or the ROSAT X-ray (0.11-0.284 keV) image obtained in some of the previous studies. We found that a foreground dust cloud, resonant scattering, and incompleteness of radiative shocks have made the definite differences between the morphologies of the above FUV emission lines. We also present the FUV spectra and line intensities from a few sub-regions.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.6-12
• /
• 2005

Fiber surface morphologies and associated internal structures are closely related to its properties. Unlike other fibers including cotton, bast fibers possess transverse nodes and fissures in cross-sectional and longitudinal directions. Their morphologies and associated internal structures were anatomically examined under the scanning electron microscope. The results showed that the morphologies of the nodes and the fissures of bast fibers varied depending on the construction of the inner fibril cellular layers. The transverse nodes and fissures were formed by the folding and spiralling of the cellular layers during plant growth. The dimensions of nodes and fissures were determined by the dislocations of the cellular layers. There were also many longitudinal fissures in bast fibers. Some deep longitudinal fissures even opened the fiber lumen for a short way along the fiber. In addition, the lumen channel of the bast fibers could be disturbed or disrupted by the nodes and the spi­rals of the internal cellular layers. The existence of the transverse nodes and fissures in the bast fibers could degrade the fiber mechanical properties, whereas the longitudinal fissures may contribute to the very rapid moisture absorption and desorption.

• 한국기계연구소 소보
• /
• 통권20호
• /
• pp.57-63
• /
• 1990

The morphologies of MC carbides (M stands for metal) and creep-rupture properties in directionally solidified Rene 80 having standard and Hf-modified chemistries were studied. It was found that Hf depressed the melting point, $\gamma$- $\gamma$’ eutectic temperature and $\gamma$’ solvus of nickel-base superalloy Rene 80, but did not depress MC carbide forming temperature. The morphologies of MC carbides depended upon solidification sequence, which led to blocky type in the early stage and script type in the late stage of solidification. Creep failure occurs through the crack initiation at the transverse components of longitudinal grain boundaries or interdendritic carbides in directionally solidified superalloys. It could be concluded MC carbide morphologies played an important role in creep properties of DS superalloys, that is, Hf additions increased the creep ductilities and lives of Rene 80.

• 한국결정성장학회지
• /
• 제23권1호
• /
• pp.8-13
• /
• 2013

다른 형태의 ZnO는 형태에 따라 각각의 활용분야에 사용할 수 있다. 다양한 형태의 ZnO 구조체(structures)는 촉매를 사용하지 않는 열 기화법(thermal evaporation process)으로 합성되었다. ZnO 구조체의 형태들은 같은 실험 공정에서 기판과 소스간의 거리에 의존하였으며, 그 결과 합성물의 형태는 hollow, cage, star 이었다. ZnO 구조체의 형상과 결정성을 주사전자현미경(SEM)과 X선 회절분석(XRD)으로 각기 평가했다. 본 연구에서는 어떤 종류의 성장 요소가 최종 구조체의 형태에 관여하는지를 입증한다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.98-103
• /
• 2016

The surface morphology of the front transparent conductive oxide (TCO) films plays a vital role in amorphous silicon thin film solar cells (a-Si TFSCs) due to their high transparency, conductivity and excellent light scattering properties. Recently, plasma textured glass surface morphologies received much attention for light trapping in a-Si TFSCs. We report various plasma textured glass surface morphologies for the high efficiency of a-Si TFSCs. Plasma textured glass surface morphologies showed high rms roughness, haze ratio with micro- and nano size surface features and are proposed for future high efficiency of a-Si TFSCs.

• 한국재료학회지
• /
• 제33권7호
• /
• pp.279-284
• /
• 2023

One-dimensional MgO nanostructures with various morphologies were synthesized by a thermal evaporation method. The synthesis process was carried out in air at atmospheric pressure, which made the process very simple. A mixed powder of magnesium and active carbon was used as the source powder. The morphologies of the MgO nanostructures were changed by varying the growth temperature. When the growth temperature was 700 ℃, untapered nanowires with smooth surfaces were grown. As the temperature increased to 850 ℃, 1,000 ℃ and 1,100 ℃, tapered nanobelts, tapered nanowires and then knotted nanowires were sequentially observed. X-ray diffraction analysis revealed that the MgO nanostructures had a cubic crystallographic structure. Energy dispersive X-ray analysis showed that the nanostructures were composed of Mg and O elements, indicating high purity MgO nanostructures. Fourier transform infrared spectra peaks showed the characteristic absorption of MgO. No catalyst particles were observed at the tips of the one-dimensional nanostructures, which suggested that the one-dimensional nanostructures were grown in a vapor-solid growth mechanism.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3239-3243
• /
• 2014

We have developed a simple method for tuning the morphologies of $Cu_2O$ microcrystals. $Cu_2O$ microcrystals were prepared by precipitation at room temperature from a mixture of $Cu(CH_3COO)_2{\cdot}H_2O$, N,N,N',N'-tetramethyl ethylenediamine (TMEDA), ascorbic acid, and polyethylene glycol (PEG). TMEDA was used to promote the formation of copper-TMEDA complexes. A variety of $Cu_2O$ microcrystal morphologies were obtained simply by varying the concentrations of TMEDA and ascorbic acid. Aggregated $Cu_2O$ microspheres are formed at higher concentrations of ascorbic acid in the absence of TMEDA. Aggregated $Cu_2O$ microcubes are formed at lower concentrations of ascorbic acid and higher concentrations of TMEDA. The crystal growth mechanism of these $Cu_2O$ morphologies is explained.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.106-109
• /
• 2003

With the variation of Ag concentration in bath, current density, additive and agitation for electroplating of Sn-Ag solder, the compositions and the morphologies of solder were studied. It was possible to control Ag content in Sn-Ag solder by varying Ag concentration in bath and current density The microstructure size of Sn-Ag solder decreased with increasing current density. Duty cycle of pulse electroplating and quantity of additive affected on Ag content of deposit and surface roughness. In this work eutectic Sn-Ag solder bumps with fine pitch of 30m and height of 15m was formed successfully. The Ag content of electrodeposited solder was confirmed by EDS and WDS analyses and the surface morphologies was analyzed by SEM and 3D surface analyzer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.483-483
• /
• 2012

Recently, nonthermal bioplasma has been attracted by researchers due to their potentials to modulate cellular functions resulting in changes of biomolecular electron band structures as well as cell morphologies. We have investigated the secondary electron emission characteristics from the surface of the erythrocyte, i.e., red blood cell (RBC) with and without the nonthermal bioplasma treatment in morphological and biomolecular aspects. The morphologies have been controlled by osmotic pressure and biomolecular structures were changed by well known reactive oxygen species. Ion-induced secondary electron emission coefficient have been measured by using gamma-focused ion beam (${\gamma}$-FIB) system, based on the quantum mechanical Auger neutralization theory. Our result suggests that the nonthermal bioplasma treatment on biological cells could result in change of the secondary electron emission coefficient characterizing the biomolecular valence band electron energy structures caused by the cell morphologies as well as its surface charge distributions.