• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.35-35
• /
• 2011

The design and preparation of novel dye rotaxanes have gained much interest recently, since such structure usually exhibits peculiar spectral and optical changes. In spite of the promising results to date, increasing pressure remains to develop novel supramolecular structures based on stimuli-responsive systems. This presentation covers the study of inclusion complexes of cyclodextrins and various chromophores, with an emphasis on our most recent outcome of anisotropic hydrogel. In this system, physical gelation prepared from simple mixture of CD and a azo dye is completed through specific host-guest interaction. The obtained hydrogel exhibits respective morphological transitions based on supramolecular assembly and dissociation, leading to either precipitation or a sol-to-gel transition. It can identify different classes of metal ions, and, among them, naked-eye differentiation of lead ion is possible due to the coordination-induced unthreading of dye molecules. Accompanying structural changes were verified by numerous characterization techniques, including 2D-ROESY, HR-MAS, UV-Visible absorption, small-angle X-ray scattering, and induced circular dichroism measurements. Such properties discussed here will find useful in analytical applications, such as metal ion sensing and removal applications.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.37-54
• /
• 2004

IPNs have interpenetrating motion and phase separation behavior of independent polymers, respectively, and also these are affected by the physical interaction of polymer components. First of all, 2- and 3-component IPNs based on PU are prepared by combination with two or three components of PU, PMMA, PS and epoxy resin. And then the entire physical properties concerning morphological and mechanical behaviors of these IPNs are measured by employing FT-IR, SEM, Rheovibron, and DSC, etc. Compared with pure component, Tg's of IPN are shifted to higher temperature in all IPN kinds, and these are considered in attribution to internal movement of glass transition temperature or partial phenomenon of interpenetration. Rheovibron measurement results in a broader distribution with peaks of tan${\delta}$ or E", and this morphologically represents a medium degree of partially mixed IPNs in confirmation of SEM photographs.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1762-1767
• /
• 2001

The Posuk-Chung Pavilion if a defunct irregular stone water channel in Kyongju, Korea, once used for the meandering stream feast'by kings of Silla Dynasty during the first millennium. The poets were seated around this stone water channel who composed the Chinese poems, overlooking the streams. They load to take the punishment drinks unless they finished the poem before the drifting cup filled with the rice wine arrived at their seats on the meandering stream. In this paper, we have made computer simulation as well as well as model experiment on the ancient meandering stream of the Posuk-Chung Pavilion. The computational results are compared with the experiment and the channel flow characteristics are delineated here. It is discussed how the present Posuk-Chung channel is morphologically distinguished from the Chinese and Japanese meandering streams.

• Elastomers and Composites
• /
• 제48권4호
• /
• pp.276-281
• /
• 2013

acrylic polyol로 개질한 polyester형 polyurethane foam을 quasi prepolymer법으로 제조하였다. 열적 및 동적 기계적 성질은 thermal gravimetric analysis 및 dynamic mechanical analysis에 의하여 분석하였다. 또한 유리전이온도는 differential scanning calorimeter로 측정하였다. Acrylic polyol 함량이 증가함에 따라 TGA에 의해 측정한 열적 안정성은 약간 감소하였다. 그리고 acrylic polyol 함량이 증가함에 따라 저장 탄성률은 증가한 반면에 tan delta 값은 감소하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.144-144
• /
• 2017

제한된 조건에서 타이타늄을 양극산화 하였을 때, 자기 정렬된 나노 튜브 형태의 티타니아 구조를 얻을 수 있으며, 그 형태는 양극산화 조건에 따라 변할 수 있음은 학계에 이미 잘 알려져 있다. 그러나 자세한 메커니즘과 전기화학적 조건들은 아직 명확하게 밝혀지지 않았다. 본 연구에서는 자기 정렬된 티타니아 나노 구조의 형태학적 변화를 인가전압과 혼합 전해질의 농도를 변화시켜가며 체계적으로 연구하여, 티타니아 나노 튜브와 마이크로 콘이 생성되는 조건에 대한 지도를 그렸다. 일반적으로 인가 전압이 증가하고, 혼합 전해질에서의 불산의 농도가 낮을수록, 티타니아 나노 구조가 나노튜브에서 마이크로 콘으로 변화하는 것을 확인하였다. 티타니아의 다양한 기능적인 특성을 바탕으로, 구조변화에 대한 전기화학적 이해를 통해, 물 분해, 연료 감응형 태양전지(DSSCs), 광촉매, 가스 센서 등에 적용될 수 있을 것으로 기대한다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.433-434
• /
• 2006

Monosized germanium micro particles are prepared by a newly developed Pulsated Orifice Ejection Method. The obtained particles are categorized into two kinds of the microstructures as refined and coarse ones. The morphological difference is estimated to be determined by the undercooling level during nucleation. Actually, the increase in the temperature of the melt was effective in coarsening the microstructure, because the temperature of the melt intensely relates to the undercooling level. The transition temperature of coarse and refined microstructures is found to be 1300-1350K. Furthermore, a triggered nucleation could improve the crystallinity of the particles in the short separation.

• 한국어류학회지
• /
• 제13권1호
• /
• pp.74-84
• /
• 2001

사육 조건하에서 동자개 Pseudobagrus fulvidraco의 발육에 따른 형태 변화 및 상대성장에 대해 검토하여 발육단계를 구분한 결과를 요약하면 다음과 같다. 1. 수정난은 난경 2.04${\pm}$0.07 mm (n = 100)의 비교적 큰 구형의 분리되는 침성부착난으로서 수조의 바닥 및 기질에 강하게 부착한다. 2. 부화자어는 전장 약 4.92${\pm}$0.33 mm로, 부화 후 1일에 입이 열리고, 부화 2일후에는 항문이 열리고, 부화 후 3일에 섭이를 시작하여 후기자어기에, 부화 후 30일경에 전장 약 32 mm에 유어기에 이른다. 3. 전장에 대한 각 부위의 상대성장에 굴곡점은 전장 7~8 mm, 17~32 mm, 32 mm 전후에 집중적으로 나타났다. 4. 외부형태의 변화 및 상대성장의 굴곡점이 나타나는 어체 크기 등을 종합적으로 고려하여 자어기에서 유어기까지의 발육단계를 구분하면, 자어기는 전장 17 mm 이하, 치어기는 17~32 mm, 유어기는 32 mm 이상으로 사료된다. 상대성장의 측정결과 전기자어기에는 머리부분에 관련된 형질, 후기자어기 이후에는 운동능력에 관련된 형질의 우성장이 뚜렷하였다.

• 한국결정성장학회지
• /
• 제31권1호
• /
• pp.1-7
• /
• 2021

Ga2O3의 준 안정상인 ε-Ga2O3는 육각형 구조나 준 육각형 구조를 가지는 기판들과 정합성이 우수하여 β-Ga2O3보다 상대적으로 쉽게 낮은 표면 거칠기와 결함 밀도를 갖는 박막을 얻을 수 있다. 이에 ε-Ga2O3를 고온에서 열처리하면 β-Ga2O3로 상전이 되는 특성을 이용하여 표면 거칠기와 결함 밀도가 낮은 고품질 β-Ga2O3 박막의 제조를 시도하였다. 이를 위해서는 고품질 ε-Ga2O3 박막의 성장이 선행되어야 하므로 본 연구에서는 갈륨과 산소의 공급 유량 비율에 따른 Ga2O3 박막의 구조적, 형태적 특성을 분석함으로써 최적의 유량 비율을 조사하였다. 추가로 열처리 조건과 ε-Ga2O3 박막에 혼입된 β-Ga2O3가 상전이 이후 β-Ga2O3의 결정성에 미치는 영향도 함께 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.1051-1054
• /
• 2004

The structural transformation behavior of $Na_2Ti_3O_7$ by hydrolysis was investigated in mild and strong acidic aqueous medium. Compared with $K_2Ti_4O_9,\;Na_2Ti_3O_7$ exhibits quite different structural and morphological transformation behavior despite their similar layered structural characteristics. $TiO_2(B)$ obtained by heat treatment of $H_2Ti_3O_7\;at\;350^{\circ}C$ transforms to rutile $H_2Ti_3O_7\;at\;900^{\circ}C$. This temperature is much lower than $1200{\circ}C$, the temperature for anatase to rutile transition when $K_2Ti_4O_9$ is used as a starting titanate. A rectangular rod shape and size of $TiO_2(B)$ particles obtained from $Na_2Ti_3O_7$ is also different from a fibrous structure of $TiO_2(B)$ prepared using $K_2Ti_4O_9$. Rutile crystals of 100 nm diameter with a corn-like morphology and large surface area are directly obtained when the hydrolysis of $Na_2Ti_3O_7$ is carried out at $100^{\circ}C$ in a strong acid solution. The structure of starting titanates and the hydrolysis conditions are an important factor to decide the particle size and morphology of $TiO_2(B)\;and\;TiO_2$.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.520-526
• /
• 2007

The effects of poly($({\varepsilon}$-caprolactone) (PCL) on poly(acrylonitrile-butadiene-styrene) (ABS) and polycarbonate (PC) blends were studied. Blends of ABS/PC (70/30, wt%) with PCL as a compatibilizer were prepared by a twin screw extruder. From the glass transition temperature $(T_g)$ results of the ABS/PC blends with PCL, the $T_g$(PC) of the ABS/PC (70/30) blends decreased with increasing PCL content. From the results of the morphology of the ABS/PC (70/30) blends with PCL, the phase separation between the ABS and PC phases became less significant after adding PCL in the ABS/PC blends. In addition, the morphological studies of the ABS/PC blends etched by NaOH indicated that the shape of the droplet was changed from regular round to irregular round by adding PCL in the ABS/PC blends. These results for the mechanical properties of the ABS/PC blends with PCL indicated that the tensile, flexural and impact strengths of the ABS/PC (70/30) blends peaked at a PCL content of 0.5 phr. From the results for the rheological properties of the ABS/PC (70/30) blends with PCL content, the storage modulus, loss modulus and complex viscosity increased at PCL content up to 5 phr. From the above results of the $T_g$, mechanical properties, morphology and complex viscosity of the ABS/PC blends with PCL, it was concluded that the compatibility was increased with PCL addition in the ABS/PC (70/30, wt%) blends and that the optimum concentration of PCL as a compatibilizer is 0.5 phr.