• Animal Systematics, Evolution and Diversity
• /
• v.36 no.4
• /
• pp.354-362
• /
• 2020

A common snapping turtle Chelydra serpentina inhabiting North America is internationally protected as an endangered species. It is known that the individuals of common snapping turtles were imported to South Korea as pets, and after being abandoned, some inhabit the natural ecosystem of South Korea like wild animals. No genetic survey has yet been performed for the common snapping turtles imported to South Korea. Hereby, cytochrome c oxidase subunit I (COI) information, which is 594 bp long, was determined for a total of 16 C. serpentina individuals, of which one was found in nature, twelve legally imported and their descendants, and the other three were provided from the Kansas Herpetological Society, USA. The obtained data were combined with thirteen COI sequences of C. serpentina retrieved from NCBI GenBank for the subsequent population genetic analyses. The results showed that there exist five haplotypes with high sequence similarity (only three parsimoniously informative sites). In the TCS and phylogenetic analyses, all the examined C. serpentina samples coincidently formed a strong monoclade with those collected mostly from Kansas State, USA, indicating that the imported ones to South Korea are from the central North America. In addition, there found the amino acid changes and the high degree of nucleotide sequence differences between C. serpentina and C. rossignoni with some important morphological characters. It is expected that the present results could provide an important framework for systematic management and control of exotic snapping turtles imported and released to nature of South Korea.

• Membrane Journal
• /
• v.31 no.6
• /
• pp.417-425
• /
• 2021

As the demand for high-capacity batteries increases, there has been growing researches on the lithium metal anode with a capacity (3,860 mAh/g) of higher than that of conventional one and a low electrochemical potential (-3.040 V). In this study, using the anatase phased TiO₂ nanoparticles synthesized by hydrothermal synthesis, a PVdF-HFP/TiO₂ organic/inorganic composite material was designed and used as an interfacial protective layer for a Li metal anode. As-formed organic/inorganic-lithium composite thin film was confirmed through the crystalline structure and morphological analyses. In addition, the electrochemical test (cycle stability and voltage profile) confirmed that the protective layer of PVdF-HFP/TiO₂ composite (10 wt% TiO₂ and 1.1 ㎛ film thickness) contributed to the enhanced electrochemical performance of the lithium metal anode (Colombic efficiency retention: 90% for 77 cycles). Based on comparative test with the untreated lithium electrode, it was confirmed that our protective layer plays an important role to stabilize/improve the EC performance of the lithium metal negative electrode.

• Journal of Food Hygiene and Safety
• /
• v.37 no.1
• /
• pp.9-14
• /
• 2022

The purpose of this study was to analyze the hazard of fungi in Garaetteok (Korean rice cake) by isolating and identifying of fungi contaminated with Garaetteok and investigating the possibility of mycotoxin production. Garaetteok used in this study were the ones that were returned back to the manufacturers in Jeollanam-do due to the presence of foreign matters presumed to be fungi. The fungi foreign matter was collected and inoculated on Potato dextrose agar, Malt extract agar, and Czapek yeast extract agar, and then cultured at 25℃ for 7 days. The micro-structure was observed under an optical microscope for the colonies in which pure isolation was confirmed. The gene sequencing of the product of amplified PCR was analyzed using the ITS primer. Colony-1 and 2 maintained the same properties in each tray, confirming that they were purely isolated. Budding cells were observed from the Colony-1, thus, it was determined to be yeast. Colony-2 was determined to be a fungus that belongs to Fusarium spp. as fusiform conidia were observed. As a result of gene sequencing, a total of 76 cases of fungi of Fusarium spp. were found, among which Fusarium solani was the most observed cases (53 cases). From the morphological and genetic identification, Colony-2 was identified as Fusarium spp., specifically, Fusarium solani. The fungi found in Fusarium spp. produce mycotoxins such as nivalenol, zearalenone, and fumonisin, which may cause vomiting, diarrhea, and cancer. Conclusively, the results confirm the possibility of mycotoxin production by Fusarium spp. isolated from Garaetteok. Consequently, when an unknown fungus was found, it is necessary to isolate and identify the fungus, determine whether it is a mycotoxin producing species, and strengthen relative administrative measures, accordingly.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1249-1249
• /
• 2022

The facade, an exterior material of a building, is one of the crucial factors that determine its morphological identity and its functional levels, such as energy performance, earthquake and fire resistance. However, regardless of the type of exterior materials, huge property and human casualties are continuing due to frequent exterior materials dropout accidents. The quality of the building envelope depends on the detailed design and is closely related to the back frames that support the exterior material. Detailed design means the creation of a shop drawing, which is the stage of developing the basic design to a level where construction is possible by specifying the exact necessary details. However, due to chronic problems in the construction industry, such as reducing working hours and the lack of design personnel, detailed design is not being appropriately implemented. Considering these characteristics, it is necessary to develop the detailed design process of exterior materials and works based on the domain-expert knowledge of the construction industry using artificial intelligence (AI). Therefore, this study aims to establish a detailed design automation algorithm for AI-based condition-responsive exterior wall panels and their back frames. The scope of the study is limited to "detailed design" performed based on the working drawings during the exterior work process and "stone panels" among exterior materials. First, working-level data on stone works is collected to analyze the existing detailed design process. After that, design parameters are derived by analyzing factors that affect the design of the building's exterior wall and back frames, such as structure, floor height, wind load, lift limit, and transportation elements. The relational expression between the derived parameters is derived, and it is algorithmized to implement a rule-based AI design. These algorithms can be applied to detailed designs based on 3D BIM to automatically calculate quantity and unit price. The next goal is to derive the iterative elements that occur in the process and implement a robotic process automation (RPA)-based system to link the entire "Detailed design-Quality calculation-Order process." This study is significant because it expands the design automation research, which has been rather limited to basic and implemented design, to the detailed design area at the beginning of the construction execution and increases the productivity by using AI. In addition, it can help fundamentally improve the working environment of the construction industry through the development of direct and applicable technologies to practice.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.59-72
• /
• 2010

This study is based on the observation on the patterned ground found in the northern part of the Baekdusan during two fieldtrips of 2008 summer. The patterned grounds are found in two areas-Dalmun and Socheonji. The patterned ground found around Dalmun are well-sorted, having fine materials in the center and coarse (boulder size) materials in the rim, and stretching in the form of stairs. Meanwhile, the types of patterned ground found around Socheonji are various, including polygon, stripe, and circular patterns. The particle size analysis and morphological analysis of comprising materials are carried out only for the patterned ground of Socheonji. The mean short and long axis of the patterned grounds are 91cm and 163cm, respectively. The distribution pattern of material size from the most samples increase toward the rim, indicating the patterned grounds are well-sorted. The comprising materials are dominated by silt, which is very susceptible for freeze-thaw cycle. The lower ratio of clay (low less than 10%), suggests that physical weathering is more dominant rather than chemical weathering. The involution structure found in the vertical section of the patterned grounds is likely to have formed by active cryoturbation which is one of the dominant geomorphic processes in the periglacial environments like the study area.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.162-166
• /
• 1986

Experiments were carried out to find the varietal differences in histological structure and outer characteristics, and its relationships between each characters in the internodes of 15 barley varieties (5 covered barley, 5 naked barley and 5 malting barley). The length of 1st-3th internodes from the top was longer in malting barley varieties, covered barley varieties and naked barley varieties in the order, but of 4th-5th internodes was longer in naked barley varieties, covered barley varieties, and malting barley varieties in the order. The diameter of naked barley varieties internodes was much thicker that of malting barley varieties. The thickness of culm wall in 1st-3rd internodes was thicker naked barley varieties, covered barley varieties, and malting barley varieties in sequence and in 4th-5th inter-nodes was covered barley varieties, malting barley varieties, and naked barley varieties in the order. The number of large vascular bundles in covered barley varieties had more than that of naked barley varieties and malting barley varieties in 1st internodes. The size of large vascular bundles in covered barley varieties and naked barley varieties was larger than that of malting barley varieties. The size of large vascular bundles had significant positive correlation with thickness of culm wall and the diameter of internodes. The thickness of culm wall was negatively correlated with the length of internodes and culm, but positively correlated with the diameter of internodes.

• Korean Journal of Ichthyology
• /
• v.35 no.3
• /
• pp.171-176
• /
• 2023

The olfactory organ of Carassius auratus and C. cuvieri was compared morphologically and morphometrically using stereomicroscopy and statistical program (SPSS version 18.0). The external morphology of the olfactory organ consists of the open semicircular anterior and posterior nostril, and nasal flap. The internal structure showed the oval rosette consisting of several lamellae arranged radiately. In statistical analysis of standard length (SL), olfactory lamellar number (LN), and SL/LN ratio between two species using independent two sample t-test and Pearson's correlation and coefficient, C. cuvieri is the longer SL than that of C. auratus and C. auratus LN (14~20) is lager than that of C. cuvieri (14~16) (P<0.001) and C. auratus LN/SL ratio (12.7±0.7%) is larger than that of C. cuvieri (8.2±0.6%). These results suggest that i) open semicircular nostrils is functional morphology to offset the boundary layer and ii) the lager LN of smaller C. auratus may be a morphological adaptation to reflect its higher olfactory dependence than C. cuvieri and iii) such interspecific difference in LN and LN/SL ratio could be applied as a new taxonomic trait for identification.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.31-37
• /
• 2024

In this study, we propose a machine vision-based pedestrian signal detection algorithm that operates efficiently even in computing resource-constrained environments. This algorithm demonstrates high efficiency within limited resources and is designed to minimize the impact of ambient lighting by sequentially applying HSV color space-based image processing, binarization, morphological operations, labeling, and other steps to address issues such as light glare. Particularly, this algorithm is structured in a relatively simple form to ensure smooth operation within embedded system environments, considering the limitations of computing resources. Consequently, it possesses a structure that operates reliably even in environments with low computing resources. Moreover, the proposed pedestrian signal system not only includes pedestrian signal detection capabilities but also incorporates IoT functionality, allowing wireless integration with a web server. This integration enables users to conveniently monitor and control the status of the signal system through the web server. Additionally, successful implementation has been achieved for effectively controlling 50W LED pedestrian signals. This proposed system aims to provide a rapid and efficient pedestrian signal detection and control system within resource-constrained environments, contemplating its potential applicability in real-world road scenarios. Anticipated contributions include fostering the establishment of safer and more intelligent traffic systems.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.126-137
• /
• 2024

In this study, zinc oxide nanoparticles (ZnONPs) were synthesized using three distinct zinc salts: zinc acetate, zinc chloride, and zinc nitrate. These ZnONPs were subsequently utilized in the fabrication of carrageenan-ZnONPs (Car-ZnONPs) composite films. The study assessed influence of the various ZnONPs on the morphological, water vapor barrier, color, optical, and antimicrobial properties of the Car-ZnONPs composite films. The surface morphology and UV-blocking attributes of the composite films were affected by the type of ZnONPs used, but their surface color, transparency, and chemical structure remained unaltered. The composite film's thickness and elongation at break (EB) significantly increased, while the tensile strength significantly decreased. In contrast, film's elastic modulus (EM) and water vapor permeability coefficient (WVP) showed no significant difference. All the composite films with added ZnONPs demonstrated potent antibacterial activity against Escherichia coli O157:H7 and Listeria monocytogenes . Among the carrageenan-based composite films, Car-ZnONPs^ZC showed the highest antibacterial and UV-blocking properties, and its elongation at break was significantly higher than that of the pure carrageenan films. This suggests that ZnONPs composite films have the potential to be used as an active packaging film, preserve the safety of the packaged food and extend shelf life.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.200-206
• /
• 1984

This study was conducted to examine the morphological, physical and chemical characteristics of the Bancheon, Gopyeong, Hwadong and Deogpyeong series derived from diluvium in Korea. The results were as follows. 1. The sequence of the Bancheon, Gopyeong, Hwadong and Deogpyeong series consists of the soil catena. Thus, the Bancheon and Gopyeong series are weil drained, the Hwadong and Deogpyeong series moderately well drained due to the influence of topography and irrigation water. 2. The surface soils of the Bancheon and Gopyeong series are yellowish red, dark yellowish brown fine silty texture and the subsoils are yellowish red, red and strong brown fine clayey with moderate to strong angular blocky or subangular blocky structure with clayey cutans on the structural face. The surface soils of the Hwadong and Deogpyeong series are dark grayish brown, grayish brown fine silty texture and the subsoils are strong brown, light olive brown and brownish yellow fine silty or fine clayey with moderate to strong prismatic, angular blocky or subangular blocky structure with clayey cutans on the structural face. The consistences of all the subsoil horizons are extremely compact and hard, whereas sticky and plastic when wet. 3. The lower the topography, the higher the silt/clay ratio, soil reaction, organic matter, available water and phosphate content but the higher the topography, the higher the active iron content. 4. These soils are classified as Hapludalfs by Soil Taxonomy in U.S.D.A. 5. These soils must be applied with much lime, phosphate and compost to improve the soil fertility.