• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.133-138
• /
• 2007

Purpose: The purpose of this study was to evaluate the morphologic features of posterior edentulous mandible for Korean patients using cross-sectional CT images. Materials and Methods: Computed tomographic cross-sectional views taken in 2004 and 2005 at Seoul National University Dental Hospital were analyzed by an oral and maxillofacial radiologist. Four indices were measured to meet the purpose of this study: 1) the horizontal distance between the alveolar crest and mandibular canal (Type), 2) the angle of the mandibular long axis (Angle), 3) the bucco-lingual location of mandibular canal, and 4) the depth of the submandibular fossa. The averages and standard deviations of the measurements were compared according to the location (the first and second molar area) and sex of the patients. Results: Statistically significant difference was found in Type, Angle, and submandibular fossa depth between the first and second molar area (p<0.05). However, there was no significant difference between men and women in any of the measured indices. Most of the mandibular canals were located in lingual side of posterior mandible. Conclusion: More care should be taken when an implant is installed on the mandibular second molar area.

• 대한디지털의료영상학회논문지
• /
• 제13권3호
• /
• pp.111-115
• /
• 2011

PET/CT(Positron Emission Tomography/Computed Tomography) is an examination combining morphological and functional information in one examination. The purpose of this study is to see the lowest CT dose for attenuation correction in the PET/CT maintaining good image quality when considering CT scan dose to the patients. We injected $^{18}F$-FDG and water into the cylinder shaped phantom, and obtained emission images for 3 mins and transmission images(140 kVp, 8 sec, 10~200 mA for transmission images), and reconstructed the images to PET/CT images with Iterative method. Data(Maximum, Minimum, Average, Standard Deviation) were obtained by drawing a circular ROI(Region Of Interest) on each sphere in each image set with Image J program. And then described SD according to the CT and PEC/CT images as graphes. Through the graphes, we got the relationships of mA and quality of images. SDs according to CT graph were 16.25 at 10 mA, 7.26 at 50 mA, 5.5 at 100 mA, 4.29 at 150 mA, and 3.83 at 200 mA, i.e. the higer mA, the better image quality was presented. SDs according to PET/CT graph were 1823.2 at 10 mA, 1825.1 at 50 mA, 1828.4 at 100 mA, 1813.8 at 150 mA, and 1811.3 at 200 mA. Calculated SDs at PET/CT images were maintained. This means images quality is maintained having nothing to do with mA of high and low.

• Applied Biological Chemistry
• /
• 제23권2호
• /
• pp.115-122
• /
• 1980

영양가가 비교적 높은 중을 원료로 하여 만든 두부의 2차 가공 산물인 식물성 치즈(Sufu)를 제조하는데 이용할 수 있는 우수균주를 선정하는 통시에 이들 균주를 이용하여 Sufu를 제조하는 과정에서 일어나는 화학성분의 변화를 측정하여 다음과 같은 결과를 얻었다. 1. 균주의 외관 및 향기를 기준으로 한 일차 선정에서는 Mucor sp.에 속하는 14개 균주를 선정하였고 2차 선정으로는 단백질 분해능이 비교적 높은 7개의 균주를 선정하였다. 2. 선정된 균주를 사용하여 제조한 pehtze는 두부에 비하여 수용성 단백질이 10% 정도 증가하였다. 3. pehtze 숙성기간 중의 단백질 가수분해 정도는 18일까지 큰 증가를 보였다가 그 이후는 큰변화가 없었다. 그리고 표준 균주와 단백질 분해력이 대등하며 Sufu 제조에 실지 이용할 수 있는 3개의 우수 균주를 선정할 수 있었다.

• 한국균학회지
• /
• 제13권2호
• /
• pp.89-97
• /
• 1985

한국 토양균 중에서 항균력이 있는 토양균을 분리하여 균 동정을 실시하였고 생성된 항균성 물질에 관해 실험하였던 바, 이 균주는 Streptomyces속 임이 확인되었고 동정 결과 type species와 일치하는 것은 없었으나 Streptomyces avellaneus와 가장 유사한 것으로 동정되었다. 이 균주에 의해서 생성된 항균성 물질의 항균병위는 사용된 Gram-positive균 중에서 Staphylococcus aureus에만 항균력을 나타내며 사용된 Gram-no-gative균 중에서는 Escherichia에만 항균력을 나타냈다. 이 균주에 의해 생성된 항균성 물질을 ion-ex-change column chromatography 등을 통하여 분리, 정제하였고, 여러가지 물리, 화학적 성질을 관찰해 본 결과 aminoglycoside계통의 항생물질로 인정되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.249-249
• /
• 2015

Silver films have been of considerable interest for years due to their better performance relative to other metal films for engineering applications. A series of multi-layer silver coatings with different thickness (i.e. 0.3 um to 1.5 um) were prepared on Aluminium substrate containing copper undercoat by direct current (DC) magnetron sputtering method. For the comparative purpose, similar thickness silver coatings were prepared by electrolytic deposition method. Microstructural, morphological, and mechanical characteristics of the silver coatings were evaluated by means of scanning electron microscope (SEM), X-ray diffraction (XRD), Surface roughness test, microhardness test and nano-scratch test. From the results, it has been elucidated that the silver films prepared by DC magnetron sputtering method has superior properties in comparison to the wet coating method. On the other hand, DC magnetron sputtering method is relatively easier, faster, eco-friendly and more productive than the electrolytic deposition method that uses several kinds of hazardous chemicals for bath formulation. Therefore, a New Work Item Proposal (NWIP) for the test methods standardization of DC magnetron sputtered silver coatings has recently been proposed via KATS, Korea and a NP ballot is being progressed within a technical committee "ISO/TC107-metallic and other inorganic coating".

• 대한치과기공학회지
• /
• 제40권2호
• /
• pp.63-69
• /
• 2018

Purpose: The purpose of this study is to investigate the non-precious metal core materials used in the dental laboratory to fabricate the implant superstructure by CAD / CAM method. And to observe and compare the morphology and distribution of the osteoblasts in relation to implant osseointegration. Methods: In this study, the mandibular right first molar tooth model was selected as an international standard to produce a single core. Using this model, the impression was made with the silicone rubber, the tooth model was scanned, and a single core was designed and 5-axis milling was performed. The materials used were Cobalt-Chromium and Nickel-Chromium, and the cores for dental implant top structures were fabricated according to the procedures of the dental labs. After the fabrication, the marginal area of the core was separated and cell culture experiment was performed. The osteoblast cells used MC3T3-E1, which is currently widely used. For morphological analysis of osteoblasts, cells were posttreated and observed using CLSM (Confocal Laser Scanning Microscope) and compared. Results: The cell adhesion behavior of the specimen surface measured by CLSM was uniformly distributed in specimen A (Cobalt-Chromium) than in specimen B (Nickel-Chromium). The distribution and changes of the cells were different in the two specimens. Conclusion : It is possible to confirm that specimen A (Cobalt-Chromium) is suitable for the living body through adhesion and proliferation of osteoblasts related to implant osseointegration in the non-precious metal superstructure used after implantation. It is considered that it is preferable to use Co-Cr when fabricating the superstructure.

• 한국식품과학회지
• /
• 제29권4호
• /
• pp.700-704
• /
• 1997

Gluten 대체 재료로써 gum질과 지방질 및 활성 gluten을 첨가하여 쌀빵의 특성을 비교 검토 하였다. 실험에 사용한 모든 종류의 gum질 첨가에 의해서 쌀빵의 제조는 가능하였으며, 특히 3% hydroxypropyl-methyl-cellulose를 첨가하여 제조하는 경우 제빵의 성형성이 좋았다. 쌀빵 제조시 첨가하는 지방질로는 상온에서 액체상인 식용유를 사용하는 편이 고체상의 지방인 마아가린이나 라아드 보다 쌀빵의 비용적을 증가시키며, 부드러운 조직감을 부여하고 있었다. 쌀빵 제조시의 가열방법은 습식가열보다는 건식가열이 바람직한 결과를 얻었다. 3% hydroxypropyl-methyl-cellulose를 첨가하여 품종별 쌀로서 빵을 제조한 경우, 한강찰벼를 제외한 모든 품종에서 쌀빵 제조가 가능하였으며, 특히 수원조, AC 27, IR 44 등의 쌀로서 제조한 쌀빵의 성형성은 아주 좋았다. Gluten과 강력분을 첨가하여 제조하는 경우에도 한강찰벼를 제외한 모든 품종에서 쌀빵 제조가 가능하였으며, 수원 230이나 Pusa-33-30 등의 쌀로서 제조한 것이 다른 품종의 쌀보다 제빵성이 좋았다.

• 한국어류학회지
• /
• 제8권2호
• /
• pp.23-32
• /
• 1996

1993년 4월부터 1994년 8월까지 우리나라의 제주도와 남해안 등지에서 채집된 자리돔속 Chromis 어류 3종, 자리돔 Chromis notata 연무자리돔 Chromis fumea 노랑자리돔 Chromis anlis에 대한 외부형태학적 검토 및 검색표를 제시하였다. 노랑자리돔은 체장에 대한 체고의 비가 자리돔과 연무자리돔에 비해 크며, 자리돔은 채집지역에 따른 형태적 변이를 보였는데 제주도에서 북쪽으로 갈수록 가슴지느러미 기저의 흑색 무늬가 삼각형에서 원형으로 되며 배지느러미의 길이는 더욱 짧아졌다. 연무자리돔은 자리돔과 가슴지느러미 기저의 흑색 무늬의 유무, 전새개골의 형태에서 서로 달랐다. 본 조사에서 자리돔은 남해안 및 제주도에 걸쳐 광범위하게 서식하며, 노랑자리 돔과 연무자리돔은 제주도에만 서식하였다.

• Journal of Veterinary Science
• /
• 제22권5호
• /
• pp.59.1-59.13
• /
• 2021

Background: Antimicrobial peptides (AMPs) have been identified as promising compounds for consideration as novel antimicrobial agents. Objectives: This study analyzed the efficacy of cecropin B against Haemophilus parasuis isolates through scanning electron microscopy (SEM) and atomic force microscopy (AFM) experiments. Results: Cecropin B exhibited broad inhibition activity against 15 standard Haemophilus parasuis (HPS) strains and 5 of the clinical isolates had minimum inhibition concentrations (MICs) ranging from 2 to 16 ㎍/mL. Microelectrophoresis and hexadecane adsorption assays indicated that the more hydrophobic and the higher the isoelectric point (IEP) of the strain, the more sensitive it was to cecropin B. Through SEM, multiple blisters of various shapes and dents on the cell surface were observed. Protrusions and leakage were detected by AFM. Conclusions: Based on the results, cecropin B could inhibit HPS via a pore-forming mechanism by interacting with the cytoplasmic membrane of bacteria. Moreover, as cecropin B concentration increased, the bacteria membrane was more seriously damaged. Thus, cecropin B could be developed as an effective anti-HPS agent for use in clinical applications.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.1-13
• /
• 2019

In this study, eco-friendly functional leather was developed by recycling wastes such as eel skin, marigold(Tagetas erecta l.), hinoki cypress(Chamaecyparis obtusa). The hot water extracts of marigold and hinoki cypress leaves were freeze-dried at $-80^{\circ}C$ to prepare colorant powder. The dyeing of eel leather with marigold was carried out to investigate the effects of dyeing conditions, mordanting on dye uptake, color, morphological change, and color fastness. Considering shrinkage of eel leather caused by dyeing, the optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature and 60 min of dyeing time at 1:100 of bath ratio, and color of the dyed eel leather was Y to YR Munsell series. In order to prevent the degradation of leather from microbe, we conducted combination dyeing with marigold and hinoki cypress leave colorants. In this case, the combination dyed eel leathers showed excellent antimicrobial activity with above 99% bacterial reduction rate against S. aurieus and K. pneumoniae. It was confirmed that all of the dyed eel leathers were sufficient to meet the Korean Standard for color fastness of leather products. It can be applied practically for the development of eco-friendly functional leather by utilizing some useful active components extracted from plant resources and by recycling food wastes.