• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.214-220
• /
• 2013

Hydrophobic coating on a silicate-based yellow phosphor ($Sr_2SiO_4:Eu^{2+}$) was carried out by using hexamethyldisiloxane (HMDSO) precursor in an atmospheric pressure dielectric barrier discharge plasma reactor, eventually to improve the long-term stability and reliability of the phosphor. The phosphor powder samples were characterized by a scanning electron microscope (SEM), a transmission electron microscope (TEM), a fluorescence spectrophotometer and a contact angle analyzer. After the coating was prepared, the contact angle of the phosphor powder increased to $133.0^{\circ}$ for water and to $140.5^{\circ}$ for glycerol, indicating that a hydrophobic layer was formed on its surface. The phosphor coated with HMDSO exhibited photoluminescence enhancement up to 7.8%. The SEM and TEM images of the phosphor powder revealed that the plasma coating led to a morphological change from grain-like structure to smooth surface with 31~46 nm thick hydrophobic layer. The light emitting diode (3528 1 chip LED) fabricated with the coated phosphor showed a substantial enhancement in the reliability under a special test condition at $85^{\circ}C$ and 85% relative humidity for 1,000 h (85/85 testing). The plasma-mediated method proposed in this work may be applicable to the formation of 3-dimensional coating layer on irregular-shaped phosphor powder, thereby improving the reliability.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1014-1019
• /
• 1999

Copolyamic acid PMDA/6FDA-PDA(PAA) and homopolyamic acids PMDA-PDA(PAA) and 6FDA-PDA(PAA) were synthesized from 1,2,4,5-benzenetetracarboxylic dianhydride(PMDA) and 2,2'-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride(6FDA) as the dianhydride and 1,4-phenylenediamine (PDA) as the diamine. Residual stresses were detected in-situ during thermal imidization of the co- and homopolyimide precursors as a function of processing temperature over the range of $25{\sim}400^{\circ}C$ using thin film stress analyzer(TFSA), and morphological structures were investigated by WAXD. In comparison, the resultant residual stress of polyimide films composed of different compositions decreased with the increasing content of PMDA unit in the chain and was about 5 Mpa in compression mode for PMDA-PDA. In this study, the synthesis of random PMDA/6FDA-PDA copolyimide could be completed and compensate for the difficulty of process due to high $T_g$ of PMDA-PDA and relatively higher stress of 6FDA-PDA. It showed that we can make a low level stress copolyimied having excellent mechanical properties by incorporating appropriate rod-like rigid structure PMDA-PDA unit into 6FDA-PDA polyimide backbone which generally shows higher stress due to rotational hinges such as bulky di(trifluoromethyl). Specially, PMDA/6FDA-PDA(0.9:0.1:1.0) satisfied excellent mechanical property and low level stress as an inter layer showing low dielectric constant.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.44-51
• /
• 1998

In this work, the in-situ viscoelastic characteristics of electropolymerized polypyrrole (PPy) thin film were investigated in the electrolyte solutions of $NaClO_4$, $LiClO_4$, and $KClO_4$ by using quartz crystal analyzer (QCA). One side of quartz crystal was used as a working electrode mounted in a special fabricated QCA electrochemical ceil. The resonant frequency and resonant resistance diagram (F-R diagram) was used to interpret the viscoelastic characteristics of Pby thin film and compared with AFM photograph. The resonant frequency, resonant resistance, and current were measured to analyze the redox reaction behaviors when the cyclic voltammetry was performed using AT-cut quartz crystal electrode coated with galvanostatically polymerized Ppy film. The result suggests that the Ppy film polymerized onto the crystal behaves as a rigid elastic layer at the initial stage of electropolymerization, while the film becomes a viscoelastic layer the polymerization proceeds further. At the same time, the film thickness increases and some morphological changes take place due to the penetration of electrolyte solution into the film. These phenomena take place when cyclic voltammetry was performed using different electrolyte solution compared with polymerization process.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.510-517
• /
• 2014

A series of polyimide (PI) was prepared by reacting 4,4'-(hexafluoroisopropylidene)-diphthalic anhydride (6FDA) as the anhydride and bis(3-aminophenyl) sulfone (APS), bis[4-(3-aminophenoxy)-phenyl] sulfone (BAPS), 2,2-bis(4-aminophenyl)-hexafluoropropane (6FPD), 2,2-bis[4-(4-aminophenoxy)-phenyl]hexafluoropropane (6FBAPP), 2,2'-bis(trifluoromethyl)benzidine (TFDB), or 1,4-phenylenediamine (PDA) as the diamine. Residual stress behaviors were detected in-situ during thermal imidization of the polyimide precursors using a thin film stress analyzer (TFSA), and interpreted with respect to their morphology. According to the molecular orientation and packing order, the residual stress varied from 23.1 to 12.5 MPa, decreased with increasing chain rigidity. The thermal properties of the PI films were investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and thermomechanical analysis (TMA). Their optical properties were measured by ultraviolet-visible spectrophotometer (UV-vis), and spectrophotometry. The properties of PI films were found to be strongly dependent upon the morphological structure. However, trade-offs between residual stress and optical properties were identified.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.305-312
• /
• 2005

Poly(urethane-imide)s were prepared by reaction between crosslinkable endgroup containing soluble polyimide (PI) by chemical imidization and acrylate end-capped polyurethane (PU). Poly (amic acid) was prepared from 2,2'-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 4,4'-oxydianiline (ODA) and then end-capped with maleic anhydride (MA). The PU prepolymers were prepared by the reaction of polycaprolactone diol, tolylene 2,4-diisocyanate and end-capped with hydroxyl ethyl acrylate. The effect of PU content on the residual stress behavior, morphology and thermal property was studied. The poly(urethane-imide)s were characterized by thin film stress analyzer (TFSA), XRD, TGA and DMTA. Low residual stress and slope in cooling curve were achieved by higher PU content. Compared to typical polyurethane, these polymers exhibited better thermal stability due to the presence of the imide groups. Finally the residual stress of poly(urethane-imide)s was strongly affected by the morphological structure.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.18 no.1
• /
• pp.81-98
• /
• 1992

Hairless mice (Skh:HR-1) exposed to single doses (0.5, 1.0 and 3. OMED) of UV-B radiation were displayed remarkable changes of barrier function and surface morphology. Trans- epidermal water loss (TEWL) as an index of barrier function was measured by evaporimeter, and wrinkle density (WD) as an index of morphological alteration was measured by image analyzer. Significant changes of TEWL were not observed in the control and 0. SMED group, but 1.OMED and 3. OMED groups noted significant difference. TEWL of 3. OMED group was rapidly increased to the 3rd day and decreased until the 14th day when it reached nearly to normal level, Time-courses of TBWL for 1. OMEB and 3. OMED groups displayed similar pattern, but different only in the magnitude. WD were significantly decreased during the 3rd-5th day in all of the irradiated groups and then increased during the last period to the 14th day, but did not recover the normal level at the 14th day. Time-courses of WD for all groups exhibited similarity, and were entirely dependent on the exposed doses. We also observed histological changes which included hyperplasia, sunburn cell (SBC) formation, accumulation of polymorphonuclear leukocyte (PMNs), and loss of collagen of UVB- exposed hairless mouse skin. Changes of TEWL and WD are helpful in understanding of epidermal and dermal damages by single exposure of UVB.

• Journal of Korean Academy of Nursing
• /
• v.44 no.3
• /
• pp.328-338
• /
• 2014

Purpose: This study was done to explore experiences of persons living through the periods of cancer diagnosis, treatment, and self-care. Methods: With permission, texts of 29 cancer survival narratives (8 men and 21 women, winners in contests sponsored by two institutes), were analyzed using Kang's Korean-Computerized-Text-Analysis-Program where the commonly used Korean-Morphological-Analyzer and the 21st-century-Sejong-Modern-Korean-Corpora representing laymen's Korean-language-use are connected. Experiences were explored based on words included in 100 highly-used-morphemes. For interpretation, we used 'categorizing words by meaning', 'comparing use-rate by periods and to the 21st-century-Sejong-Modern-Korean-Corpora', and highly-used-morphemes that appeared only in a specific period. Results: The most highly-used-word-morpheme was first-person-pronouns followed by, diagnosis treatment-related- words, mind-expression-words, cancer, persons-in-meaningful-interaction, living and eating, information-related-verbs, emotion-expression- words, with 240 to 0.8 times for layman use-rate. 'Diagnosis-process', 'cancer-thought', 'things-to-come-after-diagnosis', 'physician husband', 'result-related-information', 'meaningful-things before diagnosis-period', and 'locus-of-cause' dominated the life of the diagnosis-period. 'Treatment', 'unreliable-body', 'husband people mother physician', 'treatment-related-uncertainty', 'hard-time', and 'waiting-time represented experiences in the treatment-period. Themes of living in the self-care-period were complex and included 'living-as-a-human', 'self-managing-of-diseased-body', 'positive-emotion', and 'connecting past present future'. Conclusion: The results show that the experience of living for persons with cancer is influenced by each period's own situational-characteristics. Experiences of the diagnosis and treatment-period are negative disease-oriented while that of the self-care period is positive present-oriented.

• Journal of Plant Biotechnology
• /
• v.31 no.4
• /
• pp.301-306
• /
• 2004

Multiple shoots of garlic (Allium sativum L.) were propagated in bioreactors containing MS medium supplemented with 2% sucrose for 3 weeks. Microbulbs were induced on MS medium supplemented with 0.1mg/L NAA and 11% sucrose for 9 weeks. For multiple shoot proliferation, leaves in the shoot must be removed before cultures. When the multiple shoots were cultured without removal of leaves, more than 90% of hyperhydricity and no microbulb formation were observed. Histological observation also indicated irregular size and shape of the cells in hyperhydricity of the shoot. Microbulbs were strarted to form from the shoot after 7 weeks of culture by protuberance of adventitious shoot buds followed by inner periclinal divisions and simultaneous anticlinical division in the epidermis of meristematic bulge. Analysis of ploidy level indicated no phenotypic variations in both multiple shoots and microbulbs induced from the mother plant, suggesting genetic homogeneity among the regenerants.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.855-860
• /
• 2009

Physicochemical properties of starches isolated from 3 new potato cultivars developed by Potato Valley Ltd. were investigated and compared to those of starch isolated from 'Superior' being distributed prominently in Korea. Significant differences were observed in physicochemical properties such as granule size, amylose content, phosphorus content, water binding capacity, swelling power, solubility, and in vitro digestibility of starches from different potato cultivars. Thermal properties were evaluated using differential scanning calorimetry (DSC), and onset gelatinization temperatire ($T_o$), peak temperature ($T_p$), and enthalpies of gelatinization (${\triangle}H$) of different potato cultivars ranged as $58.0{\pm}0.3-61.7{\pm}0.4^{\circ}C,\;63.7{\pm}0.2-$ $66.5{\pm}0.0^{\circ}C$, and $15.6{\pm}0.5-17.0{\pm}0.3$ J/g, respectively. Pasting properties were evaluated using a rapid visco analyzer (RVA), and pasting temperature, peak viscosity, and final viscosity of different potato cultivars ranged as $65.0{\pm}0.1-68.9{\pm}0.1^{\circ}C$, $8,163.7{\pm}196.3-9,035.7{\pm}6.4$ cp, and $4,397.7{\pm}166.7-7,025.0{\pm}271.3$ cp, respectively. Especially, 'Gogu valley' starch showed the highest values in the amylose and phosphorus content among tested potato cultivars and higher water binding capacity, swelling power, and solubility than those of other tested starches. And it also showed high pasting temperature, peak viscosity, trough viscosity, and final viscosity as compared to other tested starches.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.714-719
• /
• 2017

The controlled synthesis of inorganic materials with a specific size and morphology is an important factor in the development of new materials in many fields, such as nanoparticles, medicine, electronics, semiconductors, pharmaceutical sand cosmetics. Solution crystallization is one of the most widely used separation processes in the chemical and pharmaceutical industries. Calcium carbonate has attracted a great deal of attention in industry because of its numerous applications. The mean crystal size, crystal size distribution and morphology are important factors in the continuous crystallization process. In this study, the continuous crystallization of calcium carbonate by the calcium chloride process was investigated. The mean crystal size and crystal size distribution data were obtained by a particle size analyzer. The morphological imaging of the crystalswasper formed by SEM. Under steady state operation, the mean crystal size change was small, but increasing the input concentration and mixing rate increased the crystal size. In this operation, some aragonite was found, but the main crystal phase was calcite.