• Restorative Dentistry and Endodontics
• /
• v.28 no.6
• /
• pp.457-466
• /
• 2003

The aim of study was to investigate the effect of flow, specimen geometry and adhesion on the measurement of linear polymerization shrinkage of light cured composite resins using linear shrinkage measuring device. Four commercially available composites - an anterior posterior hybrid composite Z100, a posterior packable composite P60 and two flowable composites, Filtek flow and Tetric flow-were studied. The linear polymerization shrinkage of composites was determined using 'bonded disc method' and 'non-bond-ed' free shrinkage method at varying C-factor in the range of 1∼8 by changing specimen geometry. These measured linear shrinkage values were compared with free volumetric shrinkage values. The viscosity and flow of composites were determined and compared by measuring the dropping speed of metal rod under constant load. In non-bonded method, the linear shrinkage approximated one third of true volumetric shrink-age by isotropic contraction. However, in bonded disc method, as the bonded surface increased the linear shrinkage increased up to volumetric shrinkage value by anisotropic contraction. The linear shrinkage value increased with increasing C-factor and approximated true volumetric shrinkage and reached plateau at about C-factor 5∼6. The more flow the composite was, reduced linear shrinkage was measured by compensation radial flow.

• Restorative Dentistry and Endodontics
• /
• v.28 no.3
• /
• pp.195-202
• /
• 2003

The purpose of this study was to evaluate the color changes of the composite resin resulting from xenon lamp exposure in different environments. Composite resin (Z 250 ; shade Al, A2, A3, A3.5, and A4) were applied in a cylindrical metal mold. Seventy five specimens according to environments of exposure were made as follows; Group I aluminum foiling of the specimens in the air at $37^{\circ}C$ for 1 day and 7 days. Group II : exposure of xenon lamp to the specimens in the air at $37^{\circ}C$ for 1 day and 7 days. Group III: exposure of xenon lamp to the specimens in distilled water at $37^{\circ}C$ for 1 day and 7 days. The color characteristics ($L^{*},a^{*},b^{*}$) of the specimens before and after exposure of xenon lamp were measured by spectrophotometer and the total color differences (${\Delta}E^{*}$) were computed. The results obtained were as follows : 1. In all groups except A1 shade of group III, the ${\Delta}E^{*}$ values presented below 2.0, and group III showed the highest ${\Delta}E^{*}$ values followed by group II and group I in a decreasing order(p<0.05). 2 In all shades and groups, the more the exposure time of xenon lamp and the lighter the shade were, the higher the tendency for discoloration (p<0.05). 3. The composite resins which was exposed to xenon lamp in the distilled water was more discolored than those in the air (p<0.05). 4. The major changes of composite resins which were exposed to xenon lamp in the air were an increase in yellowness through a positive shift of the $b^{*}$ value, and those in the distilled water were an increase in darkness and yellowness through a negative shift of the $L^{*}$ value and a positive shift of the $b^{*}$ value.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.277-290
• /
• 1993

Dental caries is considered to be caused by demineralization by organic acid produced by microorganism. But the formation of subsurface lesion in initial caries make it diffcult to explain by simple demineralization. This study is carried out on the basis of thermodynamic concept proposed by Margolis and Moreno. The purpose of this study is to evaluate the effects of acid concentration and pH of lactate buffer system on the artificial caries lesion progress. 160 teeth without any crack, defect or opaque enamel were used and coated with nail varnish except the window ($2{\times}3$ mm). Under the constant degree of saturation(D.S.). The teeth were divided into 8 groups according to acid concentration(10mM, 25mM, 50mM, 100mM) and pH(4.3, 5.0, 6.0). Each group was immersed in buffer solution for 3, 6, 9, 18 days under controlled temperature($25^{\circ}C$). After cutting through the window and grinding, the specimens, 100-150 um in thickness, were imbibed in water or air and examined using polarilizing microscope. The depth of the surface and subsurface surface lesion were measured. 1. In the constant pH and D. S. value, the subsurface lesion progresses more rapidly as the concentration of lactic acid increases. (0.01, 0.025, 0.05, 0.1) 2. In the constant acid concentration and DS value, the subsurface lesion progresses more slowly as the pH increases. (4.3, 5.0, 5.5, 6.0) 3. The width of surface lesion seems to be constant independant of pH and acid concentration.

• Child Health Nursing Research
• /
• v.17 no.3
• /
• pp.153-160
• /
• 2011

Purpose: The purpose of this study was to identify differences in sexual knowledge, attitudes and perspectives of sexual values for female students as these factors related to sexual characteristics. Methods: The participants were 835 girls in junior or high school from Seoul and Kyunggi province in Korea. Data were collected using self-report questionnaires and analyzed using descriptive statistics, t-test, F-test and Scheffe with the SPSS 14.0 WIN program. Results: The major results were as follows: First, for sexual knowledge, there were significant differences for girls from homes with conservative atmosphere and for those who had experiences related to porno. Second, related to sexual attitudes, students who had experience related to porno, were significantly more positive, and had a more open attitudes than students with no experience. Third, for perspectives of sexual value, students who perceived a conservative home atmosphere, who had boy friend, and who had experiences related to porno, had a more positive sexuality, and attitudes towards sexual equality. Conclusion: The findings indicate that it is necessary to develop special sex education programs for both school and parents so that teachers and parents can guide these students appropriately.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.95-102
• /
• 2009

The aim of this study was to evaluate the influence of light energy on the tooth whitening effect of bleaching agent in vitro..Extracted human mandibular molars were sectioned to 2 fragments(mesial. distal) and lingual portions of crown were used in this study. All specimens were stained using a red wine for 24 hours and immersed in artificial saliva. Specimens divided into four groups, group 1 and 2 light-activated by LumaCool (LED, LumaLite, Inc., Spring Valley, USA), group 3 and 4 light-activated by FlipoWhite2 (Plasma acr lamp, Lokki. Australia). Group 1 and 3 bleached with Luma White (LumaLite, Inc., Spring Valley, USA), group 2 and 4 bleached with Polaoffice(SDI, Victoria, Australia). Bleaching treatment performed during 10 minutes every 24 hours and repeated 6 times. During bleaching treatment, distal fragments was light-activated (L) but mesial fragments was not(NL). Shade assessment employed before and after bleaching treatment using spectrophotometer. The results of the change in shade was compared and analysed between NL and L by using paired-sample T test with 95 % level of confidence. There were no significant differences between NL and L with a few exceptions. In group 2, $a^*$ value more change in L, in group 3, $b^*$ value more change in L, in group 4, $a^*$ value less change in L. After bleaching, $L^*$ value and ${\Delta}E$ increased in all groups and the value of $a^*$ and $b^*$ decreased in all groups. Within the limitation of this test conditions, the results of this study indicate that the light energy has no obvious improving impact on the tooth whitening effect of a bleaching agent.

• Journal of Korean Dental Science
• /
• v.16 no.2
• /
• pp.192-203
• /
• 2023

Purpose: This study is to investigate the distribution of natural tooth shades in the Korean elderly population to quantify the correlation and changes of tooth color with age and gender. In addition, the possible effects of habits on tooth color were assessed. Materials and Methods: The tooth color of one of the maxillary central incisors of 200 Korean individuals aged 50 to 89 years, males and female, was measured using the portable intraoral spectrophotometer (VITA Easyshade V). CIELab and CIELCh color coordinates were recorded. We conducted the survey about the tobacco smoking, chronic disease, medication, eating habits, oral health behaviors and satisfaction with tooth color. Experimental data were statistically analyzed by using the t-test (P<0.05), two-way analysis of variance and Pearson's correlation test. Result: The most frequent color in the Korean elderly population was 3M3 & A3.5 shade. L^* and h^* values decreased, whereas C^*, a^* and b^* values increased progressively with age. There was a significant interaction between age and color coordinates for b^* values (r=0.245, P<0.05). Males generally have significantly higher C^*, a^*, b^* values and lower L^*, h^* value compared to females. Individuals who consumed alcohol had a higher L^* value (P<0.05). Conclusion: Within the limitation of this study, the central incisors were getting darker, more reddish, and yellowish with age. Information on the chromatic range of natural teeth by age and gender could help to select colors for esthetic dental restorations.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.39-45
• /
• 2018

The occupational safety and health act defines how to evaluate the explosion hazardous areas according to KS (Korean Industrial Standards). Current KS have to follow IEC (International Electrotechnical Commission) 60079-10-1 1st edition and there has been no change since 2008. And its 2nd edition has been revised in 2015. In this study, IEC 1st Ed. (IEC 60079-10-1 1st edition) is compared with IEC 2nd edition. Total 112 case studies including four materials (methane, propane, benzene, methanol) are selected to test and explosion hazardous ranges evaluated by IEC 1st and 2nd Ed. are analyzed according to various leakage pressures and hole sizes. In order to verify the results calculated by them, PHAST, which is one of the most representative consequence analysis programs, is employed. As a result, it can be concluded that there are many differences between IEC 1st and 2nd Ed. due to the discharge and the ventilation parameters. As comparing with PHAST, it is confirmed that IEC 1st provides more conservative values than PHAST. Even if IEC 2nd Ed. provides more conservative for gases, this fails to provide more conservative values for liquids. Therefore, it is worth to note that a large value between the explosion hazardous ranges value calculated by the IEC 1st Ed. and 2nd Ed. should be selected until further investigation and analysis is made. Morevover, the full consideration for IEC 2nd Ed. have to be needed.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.7 no.1
• /
• pp.263-292
• /
• 1994

The purpose of this study is to investigate of differences on the viewpoint of value, job aspiration, job attitude between male and female librarians. The objects of survey are 60 librarians at National Assembly Library. The results of the survey are as follows 1) In general, librarians have advanced propensity on viewpoint of value. But female librarians appear more traditional propensity than male librarians 2) Generally, the ranking of core factors in job aspiration appears ① realise professional value, ② self confidence in occupation, ③ recognized by specialist. On this, female librarians come out ① self confidence in occupation ② realise professional value, ③ recognized by specialist. 3) Generally, librarians appear more conservative attitude than male librarians about indirect service in library

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.323-331
• /
• 2008

Flexibility and fracture properties determine the performance of NiTi rotary instruments. The purpose of this study was to evaluate how geometrical differences between three NiTi instruments affect the deformation and stress distributions under bending and torsional conditions using finite element analysis. Three NiTi files (ProFile .06 / #30, F3 of ProTaper and ProTaper Universal) were scanned using a Micro-CT. The obtained structural geometries were meshed with linear, eight-noded hexahedral elements. The mechanical behavior (deformation and von Mises equivalent stress) of the three endodontic instruments were analyzed under four bending and rotational conditions using ABAQUS finite element analysis software. The nonlinear mechanical behavior of the NiTi was taken into account. The U-shaped cross sectional geometry of ProFile showed the highest flexibility of the three file models. The ProTaper, which has a convex triangular cross-section, was the most stiff file model. For the same deflection, the ProTaper required more force to reach the same deflection as the other models, and needed more torque than other models for the same amount of rotation. The highest von Mises stress value was found at the groove area in the cross-section of the ProTaper Universal. Under torsion, all files showed highest stresses at their groove area. The ProFile showed highest von Mises stress value under the same torsional moment while the ProTaper Universal showed the highest value under same rotational angle.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.441-447
• /
• 2002

The bleaching of discolored nonvital teeth is conservative treatment that satisfy the cosmetic desire. The most common method for this treatment, walking bleaching, is using 30% hydrogen peroxide and sodium perborate. Many alternatives are suggested for preventing the external cervical root resorption that is the common complication of the nonvital teeth bleaching with 30% hydrogen peroxide The same extent of oxidation reactions as that resulted by the bleaching with the application of 30% hydrogen peroxide and sodium perborate can also be acquired more safely by materials that contain 10% carbamide peroxide, used primarily for the bleaching of vital teeth. Therefore, this study was performed to evaluate the efficacy of 10% and 15% carbamide peroxide bleaching gel in nonvatal teeth bleaching. The internal bleaching of intentionally discolored teeth was performed in vitro with 10% carbamide peroxide (Group 1), 15% carbamide peroxide (Group 2), mixture of distilled water and sodium perborate (Group 3), and mixture of 30% hydrogen peroxide and sodium perborate (Group 4). The bleaching materials were refreshed following 3, 6, 9 and 12 days. To evaluate the bleaching effect, the color change of the crowns was measured at 1, 2, 3, 4, 7 and 15 days of bleaching using the colorimeter. The results were as follows：1. L$^*$ and $\Delta$E$^*$ values were increased with time in all bleaching agents (p<0.01). 2. There was no significant difference in L$^*$ and $\Delta$E$^*$ value among bleaching agents. 3. $\Delta$E$^*$ value higher than 3 was shown after 3 days of bleaching with 10% carbamide peroxide gel, 1 day with 15% carbamide poroxide gel, 4 days with mixture sodium perborate and distilled water and 4 days with mixture sodium perborate and 30% hydrogen peroride, respectively. These results revealed that the use of 10% and 15% carbamide peroxide bleaching gel in non-vital teeth bleaching is as effective as mixture of distilled water and sodium perborate and mixture of 30% hydrogen peroxide and sodium perborate. Accordingly, carbamide peroxide could be used clinically to bleach discolored non-vital teeth.