• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.407-413
• /
• 2013

This paper deals with the analysis of dynamic characteristics of mooring system of floating-type offshore wind turbine. A spar-type floating structure which consists of a nacelle, a tower and the platform excepting blades, is used to model the floating wind turbine and connect three catenary cables to substructure. The motion of floating structure is simulated when the mooring system is attached using irregular wave Pierson-Moskowitz model. The mooring system is analyzed by changing cable position of floating structure. The dynamic behavior characteristics of mooring system are investigated comparing with cable tension and 6-dof motion of floating structure. These characteristics are much useful to initial design of floating-type structure. From the simulation results, the optimized design parameter that is cable position of connect point of mooring cable can be obtained.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.48-54
• /
• 2011

Structural modifications of a ship may cause a fatal accident such as sinking and wrecking of ship. Especially, barge ship can be easily reconstructed to load more bulk cargo. In this study, for a real accident case, change of mooring force due to structural modification was analyzed to evaluate accident risk. A two dimensional dynamic model for the barge ship was constructed to compute mooring forces with related to floating motion. The equation of motion was established in Matlab code and buoyancy was calculated by using direct integration of submerged volume. The results showed that wind force, current force, and mooring force after rebuilding was approximately 4.3 kN, 14 kN, 1,561 kN respectively. The maximum force of mooring force according to the length of mooring cable were 1,614 kN at 30 m of mooring cable. Thus, an arbitrary modification of ship lead instability and unreliable result so that illegal rebuilding of ship should be avoided.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.232-239
• /
• 2002

본 논문에서는 조위변화에 따른 오탁방지막 계류라인의 거동을 조사하였다. 거동분석으로부터 안전율을 고려하여 팽팽하게 적정케이블의 길이를 정하면 수심이 하강하더라도 긴장측 케이블은 거의 일정한 장력을 유지하는 것을 알 수 있었다 그러나, 이완케이블의 기능은 상실되어 구조체 전체의 불안정성을 초래할 수도 있는 것을 알 수 있었다. 또한, 초기 직선긴장각이 계류거동에 미치는 영향을 조사해봄으로써 케이블 장력, 수중부상길이 케이블길이(재료량과 관계 있음)및 부체변위 등을 복합 고려하면서 계류 해석하여야만 적정한 설계를 할 필요가 있을 것으로 보였으며, 막체의 부착물로 인한 케이블의 장력은 줄어들어 재료손상은 일으키지 않으나 저면 앵글, Total scope 및 부체변위에 영향을 미쳐 구조물 전체의 불안정성을 초래할 수 있다는 것도 알 수 있었다.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.92-99
• /
• 1996

Longline type aquaculture facilities are being used for scallpop culture in 30 m of water 2.5 km off the coast of Joomoonjin, Kangwon-do. In this paper, the facilities are modeled by the cabele-buoy-weight system, subject to the nonlinear behaviors of the mooring lines and the effects of current. Its static configuration is shown as a solution of 3-D nonlinear static equation and Runge-Kutta $4^{th}$ method is employed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권4호
• /
• pp.375-385
• /
• 2016

Given the rapid progress made in understanding the dynamics of an offshore floating body in an ocean environment, the present study aimed to simulate ocean waves in a small-sized wave flume and to observe the motion of a cylindrical floating body placed in an offshore environment. To generate regular ocean waves in a wave flume, we combined a wave generator and a wave absorber. In addition, to precisely visualise the oscillation of the body, a set of light-emitting diode illuminators and a high-speed charge-coupled device camera were installed in the flume. This study also focuses on the spectral analysis of the movement of the floating body. The wave generator and absorbers worked well to simulate stable regular waves. In addition, the simulated waves agreed well with the plane waves predicted by shallow-water theory. As the period of the oncoming waves changed, the movement of the floating body was substantially different when tethered to a tension-leg mooring cable. In particular, when connected to the tension-leg mooring cable, the natural frequency of the floating body appeared suddenly at 0.391 Hz as the wave period increased.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.162-174
• /
• 1996

내파성 연승식 양식시설은 케이블-부이-중량물 계류시스템으로 이루어졌다. 양식시설의 최적설계를 위해서는 계류선과 부이나 중량물 연결점에서 장력등의 추정이 필요하다. 그러나 계류선의 비선형적인 거동과 파 해류 등의 영향은 해석을 어렵게 한다. 본 논문에서는 여러 거지 부이-중량물을 갖는 케이블-부이-중량물 계류시스템에 대한 파라메트릭 연구를 통하여 동장력 변화 및 거동 변화 등을 알아보았다. 고유진동수 해석을 위하여 유한차분법을 도입하였으며, 비선형 유체항력은 선형화 되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.559-579
• /
• 2015

An experimental study of the effect of mooring systems on the dynamics of a SPAR buoy-type floating offshore wind turbine is presented. The effects of the Center of Gravity (COG), mooring line spring constant, and fairlead location on the turbine's motion in response to regular waves are investigated. Experimental results show that for a typical mooring system of a SPAR buoy-type Floating Offshore Wind Turbine (FOWT), the effect of mooring systems on the dynamics of the turbine can be considered negligible. However, the pitch decreases notably as the COG increases. The COG and spring constant of the mooring line have a negligible effect on the fairlead displacement. Numerical simulation and sensitivity analysis show that the wind turbine motion and its sensitivity to changes in the mooring system and COG are very large near resonant frequencies. The test results can be used to validate numerical simulation tools for FOWTs.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.526-526
• /
• 1989

• Ocean Systems Engineering
• /
• 제3권4호
• /
• pp.257-273
• /
• 2013

Top tensioned riser (TTR) is often used in a floating oil/gas production system deployed in deep water for oil/gas transport. This study focuses on the extension of the existing numerical code, known as CABLE3D, to allow for static and dynamic simulation of a TTR connected to a floating structure through a tensioner system or buoyancy can, and restrained by riser guides at different elevations. A tensioner system usually consists of three to six cylindrical tensioners. Although the stiffness of individual tensioner is assumed to be linear, the resultant stiffness of a tensioner system may be nonlinear. The vertical friction between a TTR and the hull at its riser guide is neglected assuming rollers are installed there. Near the water surface, a TTR is forced to move horizontally due to the motion of the upper deck of a floating structure as well as related riser guides. The extended CABLE3D is then integrated into a numerical code, known as COUPLE, for the simulation of the dynamic interaction among the hull of a floating structure, such as spar or TLP, its mooring system and riser system under the impact of wind, current and waves. To demonstrate the application of the extended CABLE3D and its integration with COUPLE, the numerical simulation is made for a truss spar under the impact of Hurricane "Ike". The mooring system of the spar consists of nine mooring lines and the riser system consists of six TTRs and two steel catenary risers (SCRs).

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.167-171
• /
• 2004

The Spar platform with deep draft is characterized as effective structure in extreme wave condition, which has larger natural period than that of waves in sea. In this paper, the time simulation of motion responses of Spar with catenary mooring line is presented in irregular waves. The memory effect is modeled by added mass at infinite frequency and convolution integrals in terms of wave damping coefficients. The added mass, wave damping coefficients and wave exciting forces are obtained from three-dimensional panel method in the frequency domain. The motion equations are consisted of forces for inetia, memory effect, hydrostatic restoring, wave exciting and mooring line. The forces of mooring line are modeled as quasi-static catenary cable.