• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.107-112
• /
• 2011

The aim of this study is to analyze the hydrodynamic properties of a 2D floating body with moon pool using a 2D fully nonlinear Numerical Wave Tank(NWT). This NWT was developed based on the Boundary Element Method(BEM) with potential theory and fully nonlinear free surface boundary conditions. Free surface elevations in the moon pool were calculated in the time domain for various frequencies of forced body motions. The added-mass and damping coefficients of the heaving body were also obtained. The present numerical results were compared with the analytic and experimental results and their accuracy was verified.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.111-111
• /
• 2017

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.100-102
• /
• 2006

• 해양환경안전학회지
• /
• 제24권5호
• /
• pp.597-603
• /
• 2018

본 연구는 수중 및 여가활동에 대한 수요 증가에 따른 다이버들을 위한 보트의 구조 건전성에 관한 것이다. 대상 선박은 선체 중앙부에 Moon Pool 구조를 갖추고 있는 소형 쌍동선이며, 연구수행은 ISO Rule 기반의 허용응력 산정을 통한 유한요소 해석법을 이용하여 연구를 수행하였다. 연구수행 방법은 ISO 12215-5와 TC118.1225-7에서 정의하고 있는 계수를 산정하고, 종방향굽힘 모멘트, 비틀림 모멘트, 선저슬래밍 하중 등을 적용하여 ISO 기준과 허용응력 설계법(ASD)에 의한 적합성 여부를 판정하고 유한요소해석(FEA)를 활용한 극한강도 설계법을(LFRD)를 적용하여 수행하였다. 연구결과 문풀형 구조를 가진 선박도 ISO규정, KR규정을 적용하여 설계시 구조적 건전성을 확보하는 것으로 사료된다.

• 대한조선학회논문집
• /
• 제56권5호
• /
• pp.389-395
• /
• 2019

Turret mooring type Floating Production Storage and Offloading (FPSO) is designed to rotate the hull around a turret system. The system is mounted inside a cylindrical moon-pool structure of the ship hull structure. The upper part of the moon-pool structure called Bogie Support Structure (BSS) is supported on ring type rail structure (bogie), so high roundness is required at the top of the structure. In this study, the deformation measured during BSS installation was compared with the predicted values through the thermal elasto-plastic analysis, and the causes of deformation were analyzed. Deformation behavior of cylindrical structure with a very large diameter compared to the thickness was investigated. In addition, a proper welding sequence and correction method for the deformed structure were proposed. This study can be an example of the solution to the tolerance problem of large cylindrical structures.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.36-46
• /
• 2011

A two-dimensional floating body with a moon pool under forced heave motion, including a piston mode, is numerically simulated. A dynamic CFD simulation is carried out to thoroughly investigate the flow field around a two-dimensional moon pool over various heaving frequencies. The numerical results are compared with experimental results and a linear potential program by Faltinsen et al. (2007). The effects of vortex shedding and viscosity are investigated by changing the corner shapes of the floating body and solving the Euler equation, respectively. The flow fields, including the velocity, vorticity, and pressure fields, are discussed to understand and determine the mechanisms of wave elevation, damping, and sway force.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.473-478
• /
• 2011

Welding process generates distortion and residual stress in the weldment due to rapid heating and cooling. Welding distortion and residual stress in the welded structure result in many troubles such as dimensional inaccuracies in assembling and safety problem during service. The accurate prediction of welding residual stress is thus very important to improve the quality of weldment and find the way to reduce itself. This paper presents the simulation of welding-induced residual stress analysis to examine the cause of cracking in the SUS-overlay welding specimen at FPSO Moon Pool structure.

• Journal of Welding and Joining
• /
• 제29권3호
• /
• pp.70-75
• /
• 2011

Welding process generates distortion and residual stress in the weldment due to rapid heating and cooling. Welding distortion and residual stress in the welded structure result in many troubles such as dimensional inaccuracies in assembling and safety problem during service. The accurate prediction of welding residual stress is thus very important to improve the quality of weldment and find the way to reduce itself. This paper presents the simulation of welding-induced residual stress analysis to examine the cause of cracking in the SUS-overlay welding specimen at FPSO Moon Pool structure.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.499-507
• /
• 1988

The pressure suppression pool of BWR(Boiling Water Reactor) is subjected to hydrodynamic impact in the event of a LOCA(Loss of Coolant Accident). The pressure increase in the reactor dry cell would force the existing water of a vent pipe into the suppression pool. When the water is ejected through the pipe opening into the suppression pool, an abrupt downward force is transmitted to the suppression pool floor. Consequently, many structures installed within the pool must be able to withstand these forces. In order to determine the optimum safe locations of the pool structures, numerical analysis have been carried out to investigate the hydrodynamic behavior of the water jet. In the present analysis, a two-dimensional numerical model is utilized to solve transient flow equations.

• Ocean and Polar Research
• /
• 제30권3호
• /
• pp.277-287
• /
• 2008

We collected information on seasonal and interannual variability of surface chlorophyll a concentration between 1997-2007 from the Northwest Pacific Ocean. Satellite data were used to acquire chlorophyll a and sea surface temperature from six regions: East Sea/Ulleung Basin, East China Sea, Philippin Sea, Warm Pool region, Warm Pool North region, and Warm Pool East region. Mixed layer depth (MLD) was calculated from temperature profiles of ARGO floats data in four of the six regions during 2002-2007. In the East Sea/Ulleung Basin, seasonal variability of chlorophyll a concentration was attributed to seasonal change of MLD, while there was no significant relationship between chlorophyll a concentration and MLD in the Warm Pool region. Interannual anomaly in sea surface temperature were similar among the East Sea, East China Sea, Philippin Sea, and Warm Pool North region. The anomaly pattern was reversed in the Warm Pool East region. However, the anomaly pattern in the Warm Pool region was intermediate of the two patterns. In relation to chlorophyll a, there was a reversed interannual anomaly pattern between Warm Pool North and Warm Pool East, while the anomaly pattern in the Warm Pool region was similar to that of Warm Pool North except for the El $Ni\tilde{n}o$ years (1997/1998, 2002/2003, 2006/2007). However, there was no distinct relationship among other seas. Interestingly, in the Warm Pool and Warm Pool East regions, sea surface temperature showed a pronounced inverse pattern with chlorophyll a. This indicates a strong interrelationship among sea surface temperature-MLD-chlorophyll a in the regions. In the Warm Pool and Warm Pool East, zonal distribution of chlorophyll a concentration within the past 10 years has shown a good relationship with sea surface temperature which reflects ENSO variability.