• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.24-31
• /
• 2014

This paper dealt with the LED optical illumination system design for the Masthead navigation light to replace halogen lamps. We made Fresnel lens satisfy luminous intensity distribution of "Convention on the International Regulation for Preventing Collisions at Sea(COLREG)". The optical system is designed by classifying three parts: light source, lens, and cut off plate. The source of light has been made to have the uniform horizontal and vertical light distribution by placing 6 LEDs at intervals of $54^{\circ}$, and as the cylindrical Fresnel lens, the lens has been designed to achieve the uniform horizontal and vertical light distribution in the range of plain light. Finally, the cover has been designed to block the light from the outside of plain light and ultimately met the standards for light distribution of navigation lights. In addition, the validity of design has been verified with manufacturing a trial product.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1262-1265
• /
• 2004

To increase the performance of the light diffusion films, we controlled the three dimensional microstructure of the organic fillers(beads). The refractive index, the size distribution and the three dimensional distribution of beads play an important role to determine the performance of light diffusion films for the backlight unit of TFT-LCD.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1170-1173
• /
• 2012

We have investigated the LED lens eccentricity effect on light intensity distribution. For the purpose, we introduced an equation of focal length for paraboloid, and then made a comparative analysis of the theoretical result and 3-D simulation result.

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.370-376
• /
• 2014

We optimized the design of the flat encapsulant of a light-emitting diode (LED) package to obtain higher light output power (LOP), both by experiment and simulation using three-dimensional ray-tracing software. In the experiment, the refractive index of the encapsulant was varied (1.41 and 1.53). In addition, double-layer structures with these refractive indices (1.41/1.53) were investigated by varying the shape of the interface between the two among flat, concave, and convex. The experiments showed that the LOP of the double-layer encapsulant with convex interface increased by 13.4% compared to the single-layer encapsulant with a refractive index 1.41, which was explained by the increase of the light extraction efficiency (LEE) in connection with the increase of the critical angle (${\theta}_c$) and the decrease of the Fresnel reflection.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2014

The base of leisure air activities are consistently expanding and its demand is expected to increase attributed to GDP growth and people's interest in its activity. Utilizing Visual Flight Rule, light sport aircrafts and ultra-light aircrafts are not under the effect of air traffic control center, which resulted in passenger injury due to emergency landing for adverse weather conditions and technical issues after pulling into mountain area, ocean and even urban area. Such events encouraged safety consciousness toward leisure aircraft activities and developing a measure to prevent a recurrence of the accident. This research focuses on suggesting compositive system for preventive safety management system by providing user based Flight information service and operating effective system, necessary for leisure aircraft activities.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.6
• /
• pp.506-513
• /
• 2016

In general, LLC converters show great promise in applications that require high efficiency, especially under light load conditions. In particular, LLC converters feature wide gain capability with pulse-frequency modulation and zero voltage switching over entire load conditions. However, output voltage increases in light load conditions. In this study, Bode plot and impedance asymptotes analyses were conducted to obtain insights into the regulation characteristics of LLC converters under light load conditions. To improve the regulation characteristic of LLC converters, a new resonant tank with an additional capacitor is proposed. The design guideline for the proposed LLC converter is determined by the Bode plot and impedance asymptotes analyses. Therefore, the proposed LLC converter achieves the light load regulation while maintaining the advantages of typical LLC converters.

• Journal of Information Display
• /
• v.13 no.3
• /
• pp.119-123
• /
• 2012

In this work, we report on a new monitoring method for an organic light-emitting diode (OLED) panel for lighting by optical sensing of the wave-guided light in the substrate. Using microlens array films, the wave-guided light was extracted into the edge or back side of the panel to be monitored by a photodiode. The luminance of the extracted light was measured as linearly proportional to the front light. Thus, by converting the extracted light into photo voltage, monitoring the luminance change occurring in the OLED is possible. Based on the results and concepts, we have proposed a photodiode-equipped driving circuit which can generate compensated driving current for uniform luminance of OLED panels.

• Proceedings of the Korean Society of Potoscience Conference
• /
• spring
• /
• pp.97-103
• /
• 2003

Phytochrome controls diverse aspects of plant development in response to the ambient light conditions. HFRl, a basic helix-loop-helix protein, is required for a subset of phytochrome A (phy A)-mediated photo-responses in Arabidopsis. Here, we show that overexpression of HFR1-N105, but not the one of the full-length HFR1, confers exaggerated photo-responses. The transgenic plants overexpressing HFR1- N105 exhibited light-independence in a subset of photo-responses, including germination, de-etiolation, gravitropic hypocotyl growth, and blocking of greening. Overexpression of HFR1-N105 also caused constitutive light-responses in the expression of some light-regulated genes. In addition, the HFR1-N105 overexpressor showed hypersensitive responses under R and FR light, dependently on phyB and phyA, respectively. End-of-day far-red light response and petiole elongation were suppressed in the HFR1-N105 overexpressor plants. Together these results imply that overexpression of HFR1-N105 activated a branch of light signaling, supporting the hypothesis that transcriptional regulation in the nucleus would be the primary mechanism of light signaling in Arabidopsis. We discuss the biotechnological potential of the mutant bHLH protein, HFR1-N105 in regard to suppressed shade avoidance syndrome.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.5
• /
• pp.26-33
• /
• 2015

Secondary optical system designed for LED bulb which emits light in all directions was simulated with Energy Star standards. Components of the optical system were LED light source, the cover of the LED bulb and reflector which is to confirm the diffuser plate and LightTools software was used to design the illumination optics. The main points of the secondary optical system design are the location of the LED light source, the shape of the LED bulb cover, the location of the reflection plate, and the scattering properties of the diffusing plate. Mechanism of the LED bulb is that the light emitted from the light source move on to the backward after reflected by the coated light cover from the inside and then the reflected light is scattered by the diffuser plate. The LED bulb was designed to satisfy the standard light distribution and color specifications of the Energy Star(IES LM-79-08).

• Preventive Nutrition and Food Science
• /
• v.14 no.4
• /
• pp.349-353
• /
• 2009

The effects of packaging materials on preserving the functional component of pine bud beverage stored under UV (ultraviolet) light exposure conditions were studied. The order of UV light blocking properties of the selected packages was: opaque can> opaque PET (polyethylene terepthalate) with green lamination=transparent PET with 10% PEN (polyethylene naphthalate) blending> transparent PET, and did not depend on film thickness in specified range. At 20${^{\circ}C}$, the order of preserving degree of original color and endobornyl acetate, which is quality index of pine bud beverage, was the same as above. Exposure to UV light can cause of deterioration of functional food components, but green color lamination and blending of PEN materials with transparent PET help to preserve the UV sensitive pine bud beverage components. However, the treated PET bottles have poorer preservation capabilities than the opaque cans. Transparent PET with PEN blending, in particular, will be very useful packaging material for colorful functional beverage preservation by helping to protect the ingredients while attracting consumer attention.