• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.234-242
• /
• 2014

Imicyafos which is a nematicide for controlling root-knot nematodes has been registered in the Republic of Korea in 2012, and the maximum residue limits of imicyafos are set to watermelon and korean melon as each 0.05 mg/kg. Extremely reliable and sensitive analytical method is required for ensuring food safety on imicyafos residues in agricultural commodities. Imicyafos residues in samples were extracted with acetone, partitioned with hexane and dichloromethane, and then purified with florisil. The purified samples were analyzed by HPLC-UVD and confirmed with LC-MS. Linear range was between 0.1~5 mg/kg with the correlation coefficient ($r^2$) 0.99997. Average recoveries of imicyafos ranged from 77.0 to 115.4% at the spiked levels of 0.02 and 0.05 mg/kg with the relative standard deviations of 2.2~9.6%. Limit of detection and quantification were 0.005 and 0.02 mg/kg, respectively. An inter-laboratory study was conducted to validate the determination method in depth, and the results were satisfactory. All of the validation results revealed that the developed analytical method in this study is relevant for imicyafos determination in agricultural commodities and will be used as an official analytical method.

• Journal of Veterinary Clinics
• /
• v.22 no.1
• /
• pp.16-20
• /
• 2005

The purpose of this study was to compare the antiangiogenic effects of As₄O/sub 6/ to those of As₂O₃ on the rat corneal micropocket model induced by VEGF. 20 ng VEGF impregnated pellets were used for angiogenic inducer on the rat cornea micropocket assay in this study. After ophthalmoscopic examination, Sprague-Dawley rats with normal cornea were implanted VEGF pellet. Total 60 eyes were used in this study. Control group only received VEGF pellet, As₂O₃ group followed oral administration of As₂O₃ at a dose of 50 mg/kg per day after VEGF pellet implantation and As₄O/sub 6/ group followed oral administration of As₄O/sub 6/ at a dose of 50 mg/kg per day after VEGF pellet implantation were classified. The eyes were examined under a surgical microscope daily on postoperative from day 3 to day 9 after pellet implantation. The number, length, clock hour of vascularization, and area of vessels in As₄O/sub 6/ group were significantly less evident than those of control group and As₂O₃ group (P < 0.05). In conclusion, As₄O/sub 6/ had better antiangiogenic effects on the new vessel induced by VEGF in the rat cornea.

• Korean Journal of Breeding Science
• /
• v.49 no.4
• /
• pp.420-427
• /
• 2017

'Pungwonmi', a new sweetpotato variety, was developed for table use by Bioenergy Crop Research Institute, National Institute of Crop Science (NICS), RDA in 2014. This variety was derived from the cross between 'Benisatsuma' and 'Luby3074' in 2006. The seedling and line selections were performed from 2007 to 2009, and preliminary and advanced yield trials were carried out from 2010 to 2011. The regional yield trials were conducted at five locations from 2012 to 2014, and it was named as 'Pungwonmi'. This variety has cordate leaf shape, and its leaves, stems, nodes, and petioles are green. Storage root of 'Pungwonmi' has an elliptical shape, red skin, and light orange flesh. 'Pungwonmi' was moderately resistant to fusarium wilt, and resistant to root-knot nematode. Dry matter content was 31.2%, and texture of steamed storage root was intermediate. Total sugar content of raw and steamed storage roots of 'Pungwonmi' was higher than that of 'Yulmi'. ${\beta}$-carotene content of 'Pungwonmi' was 9.1 mg/100g DW. Yield of marketable storage root over 50 g of 'Pungwonmi' was 24.3 MT/ha under the early season culture, which was 46% higher than that of 'Yulmi'. The number of marketable storage roots per plant was 2.8 and the average weight of marketable storage root was 156 g under the optimal and late season culture. Marketable storage root yield of 'Pungwonmi' was 24.1 MT/ha under the optimum and late season culture, which was 26% higher than that of 'Yulmi'. (Registration No. 6428).

• CELLMED
• /
• v.8 no.1
• /
• pp.5.1-5.4
• /
• 2018

Pharmacopuncture, or herbal acupuncture, is a new form of therapy derived from combinations of two traditional therapeutic methods, herbal medicine and acupuncture therapy. To compare the efficacy between loratadine-pharmacopuncture (LP) and loratadine-oral administration (LO), the effect of loratadine was investigated in murine models. Anti-anaphylactic effects of loratadine treatments were investigated in compound 48/80-induced systemic anaphylactic reaction and passive cutaneous anaphylaxis (PCA). LP treatment significantly inhibited the compound 48/80-induced systemic anaphylactic reaction and PCA. The effect between LP and LO were on a similar level. These results indicate that LP can be used as an alternative method for LO in case of emergency.

• Korean Journal of Veterinary Service
• /
• v.37 no.2
• /
• pp.111-122
• /
• 2014

The present study was designed to explore the antioxidant effect of Bamboo powder and its immunoreactivity in pigs. We investigated the functional properties of Bamboo extracts by means of measuring the contents of total polyphenols and flavonoid as well as determining ABST, DPPH radical scavenging activity, and hydroxyl radical scavenging activity and anticancer activity. The total phenolic compound and flavonoids contents of Bamboo extracts were 171.25 mg/g and 127.5 mg/g, respectively. The DPPH radical, hydroxyl radical, ABST radical scavenging activity of Bamboo extracts were 17.3%, 12.5% and 21.5%, respectively. Evidenced by MTT and cell cycle assay, Bamboo dose-dependently inhibited the cell proliferation and induced G0/G1-phase arrest in CHO cells at concentrations of 100, 250, and 500 ${\mu}g/ml$ Bamboo extracts. More than 80% of apoptotic cells were observed by staining with annexin V in 500 ${\mu}g/ml$ Bamboo-treated CHO cells, indicating that Bamboo had potent anticancer activities. Next, to investigate the effect of Bamboo on cytokine, immunoglobulin concentration, and blood compositions, flatting pigs were fed with Bamboo powder for 38 days. Flatting pigs were divided into 4 groups; basal diet (control), basal diet supplemented with 1% Bamboo powder (T1), 2% Bamboo powder (T2), and 3% Bamboo powder (T3). The level of hemoglobin increased in the all Bamboo-fed groups compared with the normal control group. In particular, platelet levels in the all Bamboo-treated groups increased by approximately 90% compared with the levels from pig on a normal control. Serum levels of immunoglobulins (IgG, IgA) in the pigs fed Bamboo powder were modestly increased, and the interferon-${\gamma}$ level also was strongly increased in 2% or 3% Bamboo-fed groups compared with the levels in control groups. Together, these results demonstrated that Bamboo extracts had an effective capacity of scavenging for ABTS, DPPH, and hydroxyl radicals and showed correlation with potent phenol and flavonoid contents, thus suggesting its antioxidant potential. Moreover, administration of Bamboo in 2~3% improved blood parameters and platelets, and especially immunity-related ones such as IgG, IgA, and interferon-${\gamma}$, leading to be potential feed additives in flatting pigs.

• Molecules and Cells
• /
• v.38 no.3
• /
• pp.210-220
• /
• 2015

Athletic performance is an important criteria used for the selection of superior horses. However, little is known about exercise-related epigenetic processes in the horse. DNA methylation is a key mechanism for regulating gene expression in response to environmental changes. We carried out comparative genomic analysis of genome-wide DNA methylation profiles in the blood samples of two different thoroughbred horses before and after exercise by methylated-DNA immunoprecipitation sequencing (MeDIP-Seq). Differentially methylated regions (DMRs) in the pre-and post-exercise blood samples of superior and inferior horses were identified. Exercise altered the methylation patterns. After 30 min of exercise, 596 genes were hypomethy-lated and 715 genes were hypermethylated in the superior horse, whereas in the inferior horse, 868 genes were hypomethylated and 794 genes were hypermethylated. These genes were analyzed based on gene ontology (GO) annotations and the exercise-related pathway patterns in the two horses were compared. After exercise, gene regions related to cell division and adhesion were hypermethylated in the superior horse, whereas regions related to cell signaling and transport were hypermethylated in the inferior horse. Analysis of the distribution of methylated CpG islands confirmed the hypomethylation in the gene-body methylation regions after exercise. The methylation patterns of transposable elements also changed after exercise. Long interspersed nuclear elements (LINEs) showed abundance of DMRs. Collectively, our results serve as a basis to study exercise-based reprogramming of epigenetic traits.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.871-876
• /
• 2013

The purpose of this study was to investigate antimicrobial effectiveness of Omija (Schizandra chinensis Baillon) treated with $ClO_2$ (chlorine dioxide) concentration (10, 15, 20, 25 and 30 ppm), washing time (30, 60 and 90 sec) and multiple proportion (x1, x2, x3 and x4). The seven groups were divided into control (Omija without washing water treatment), W-T (Omija treated by tap water ($20{\pm}1^{\circ}C$) for 30 seconds), $ClO_2$-10 (Omija treated by 10 ppm $ClO_2$), $ClO_2$-15 (Omija treated by 15 ppm $ClO_2$), $ClO_2$-20 (Omija treated by 20 ppm $ClO_2$), $ClO_2$-25 (Omija treated by 25 ppm $ClO_2$), $ClO_2$-30 (Omija treated by 30 ppm $ClO_2$), and then they were detected number of total aerobic bacteria, yeast and mold. The rate of inactivation was found, for microorganisms of total aerobic bacteria, yeast and mold, to increase with a increase of $ClO_2$ treatment concentration and multiple proportion. No total aerobic bacteria, yeast and mold in $ClO_2$-30 sample treated for 30 sec, $ClO_2$-15 treated for 60 sec and $ClO_2$-10 treated for 90 sec were detected, and in $ClO_2$-30 Omija with multiple proportion ${\times}1$ (Omija : 30 ppm $ClO_2$ solution ratio was 1:1 (w/w)), $ClO_2$-20 with ${\times}2$ (Omija : 20 ppm $ClO_2$ solution ratio was 1:2 (w/w)) and $ClO_2$-15 with ${\times}4$ (Omija : 15 ppm $ClO_2$ solution ratio was 1:4 (w/w)) respectively.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.25-53
• /
• 2013

This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.

• Journal of Korean society of Dental Hygiene
• /
• v.2 no.1
• /
• pp.63-83
• /
• 2002

The purpose of this study was to serve as a basis for more efficient dental hygienist human resources utilization and for determining some of the right directions for supplementary education for dental hygienists, by examining how they actually worked and what they thought of job-related things. The subjects in this study were 537 dental hygienists who participated in a seminar by the Korea Dental Hygienist Association. After a survey was conducted, the following findings were given: 1. 50.2% of the dental hygienists investigated completed legally required eight-class education. Those who worked in clinics took less supplementary education classes than the others in the other types of dental institutions. The main reason they didn't receive supplementary education was financial burden and uncooperative employers. 73.2% took supplementary education at the association or its branches. The association was most favored by those in clinical sector as a place that provides supplementary education, followed by its branch and university in the order named. And the dental hygienists in public health sector preferred university most, and the next best favored one was the association and its branch in the order named. Those in clinical sector hoped to acquire clinical information on patient management, implant or aesthetics, and the dental hygienists in public health sector wanted to learn about health administration, public oral health operations and oral health education, which were different from what those in clinical sector wanted. 2. Regarding the period of service, 492% had worked for three years or more. This fact suggested that their service term and average age continued to grow. And they thought they would decide the retirement time on their own. 3. The most common yearly income ranged from 12 million won to 16 million won(40.7%). For-those in clinics, yearly income was 14.36 million won, and that of the dental hygienists who had worked for less than 3 years was 12.90 million won. 4. The Korea Dental Hygienist Association was most required to protect the rights and interests of the members and offer new knowledge and technology. 5. The largest group of them were engaged in patient management, and this type of job also was the most favored one for them to do. The greatest number of the dental hygienists in public health sector were in charge of dental treatment. 6. Concerning their turnover rate, 492% had never changed their occupation. Specifically, 70.0% of the respondents who had worked for less than 3 years had have no experience to do that. The time constraints for self-development and conflicts with other workers were the cause of their turnover. Those in dental hospital and general hospital changed their occupation chiefly due to the lack of time for self-development, and for the dental hygienists in clinics, the conflicts with other workers were the main reason. The above-mentioned findings suggested that the way the dental hygienists looked at things was undergoing change. The service area made a difference to their preference for the type of supplementary education and institution in charge of it, as those in public health and clinical sectors had a different opinion. And the dental hygienists in clinical sector had a different opinion as well, according to service area, about salaries, reason of not taking supplementary education, preferred type of supplementary education, cause of turnover, and type of occupation to which they hoped to change employment. To utilize and supply human resources in a more stabilized manner, job description should be more segmented, standardized and classified clearly, and dental hygienists should be motivated to perform their substantial jobs, including oral disease prevention, oral prophylaxis and oral health education. To make it happen, it seems that dentists are required to have a clear understanding of dental hygienist job and to change the way they look at it.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.81-99
• /
• 2010

Lately, in consumers' markets the number of new items is rapidly increasing at an overwhelming rate while consumers have limited access to information about those new products in making a sensible, well-informed purchase. Therefore, item providers and customers need a system which recommends right items to right customers. Also, whenever new items are released, for instance, the recommender system specializing in new items can help item providers locate and identify potential customers. Currently, new items are being added to an existing system without being specially noted to consumers, making it difficult for consumers to identify and evaluate new products introduced in the markets. Most of previous approaches for recommender systems have to rely on the usage history of customers. For new items, this content-based (CB) approach is simply not available for the system to recommend those new items to potential consumers. Although collaborative filtering (CF) approach is not directly applicable to solve the new item problem, it would be a good idea to use the basic principle of CF which identifies similar customers, i,e. neighbors, and recommend items to those customers who have liked the similar items in the past. This research aims to suggest a hybrid recommendation procedure based on the preference boundary of target customer. We suggest the hybrid recommendation procedure using the preference boundary in the feature space for recommending new items only. The basic principle is that if a new item belongs within the preference boundary of a target customer, then it is evaluated to be preferred by the customer. Customers' preferences and characteristics of items including new items are represented in a feature space, and the scope or boundary of the target customer's preference is extended to those of neighbors'. The new item recommendation procedure consists of three steps. The first step is analyzing the profile of items, which are represented as k-dimensional feature values. The second step is to determine the representative point of the target customer's preference boundary, the centroid, based on a personal information set. To determine the centroid of preference boundary of a target customer, three algorithms are developed in this research: one is using the centroid of a target customer only (TC), the other is using centroid of a (dummy) big target customer that is composed of a target customer and his/her neighbors (BC), and another is using centroids of a target customer and his/her neighbors (NC). The third step is to determine the range of the preference boundary, the radius. The suggested algorithm Is using the average distance (AD) between the centroid and all purchased items. We test whether the CF-based approach to determine the centroid of the preference boundary improves the recommendation quality or not. For this purpose, we develop two hybrid algorithms, BC and NC, which use neighbors when deciding centroid of the preference boundary. To test the validity of hybrid algorithms, BC and NC, we developed CB-algorithm, TC, which uses target customers only. We measured effectiveness scores of suggested algorithms and compared them through a series of experiments with a set of real mobile image transaction data. We spilt the period between 1st June 2004 and 31st July and the period between 1st August and 31st August 2004 as a training set and a test set, respectively. The training set Is used to make the preference boundary, and the test set is used to evaluate the performance of the suggested hybrid recommendation procedure. The main aim of this research Is to compare the hybrid recommendation algorithm with the CB algorithm. To evaluate the performance of each algorithm, we compare the purchased new item list in test period with the recommended item list which is recommended by suggested algorithms. So we employ the evaluation metric to hit the ratio for evaluating our algorithms. The hit ratio is defined as the ratio of the hit set size to the recommended set size. The hit set size means the number of success of recommendations in our experiment, and the test set size means the number of purchased items during the test period. Experimental test result shows the hit ratio of BC and NC is bigger than that of TC. This means using neighbors Is more effective to recommend new items. That is hybrid algorithm using CF is more effective when recommending to consumers new items than the algorithm using only CB. The reason of the smaller hit ratio of BC than that of NC is that BC is defined as a dummy or virtual customer who purchased all items of target customers' and neighbors'. That is centroid of BC often shifts from that of TC, so it tends to reflect skewed characters of target customer. So the recommendation algorithm using NC shows the best hit ratio, because NC has sufficient information about target customers and their neighbors without damaging the information about the target customers.