이산화탄소 포집을 위해 가장 일반적으로 이용되고 있는 방법은 알카놀아민인 모노에탄올아민(MEA) 용매를 이용한 가역적 화학흡수이다. 이러한 MEA 용매는 $CO_{2}$와 반응성이 우수한 반면 다른 흡수제에 비해 연소배가스에 포함되어 있는 이산화탄소, 산소 및 기타 산성가스들에 의한 흡수제의 성능저하, 부식 및 열화현상을 유발하는 것으로 알려져 있다. 본 연구에서는 정유공정의 스팀 리포밍공정으로부터 열화된 MEA 시료를 이용하여 연구되었다. 일반적으로 사용되는 흡수제인 MEA 용매와 열화된 용매의 성능을 비교 분석하였다. MEA 30 wt% 흡수제와 열화물(DP) 20 wt% + PZ 10 wt% 흡수제의 경우 흡수용량이 각각 $0.5365mol_{CO2}/mol_{absorbent}$와 $0.5939mol_{CO2}/mol_{absorbent}$로 증진제(PZ)에 의해 흡수능이 향상되었음을 확인하였다. 반면 흡수속도는 MEA 30 wt% 흡수제가 $1.1610kg_{f}/cm^2{\cdot}min$로 열화물(DP) 20 wt% + PZ 10 wt% 흡수제의 $0.5310kg_{f}/cm^2{\cdot}min$보다 높게 나타났으나, 열화물 30 wt% 단독으로 사용하였을 때 $0.3525kg_{f}/cm^2{\cdot}min$보다는 향상되었다. 따라서 적합한 증진제의 선정을 통해 열화물도 $CO_{2}$ 흡수제로서 재사용할 수 있다는 것을 확인하였다.
알카놀아민흡수제에 대한 $CO_2/SO_2/NO_2$의 흡수속도를 살펴보기 위해 현재 널리 사용되는 흡수제인 2-amino-2-methyl-1-propanol(AMP)와 monoethanolamine(MEA)를 비교하기 위하여 평면교반조에서 $CO_2/SO_2/NO_2$의 흡수속도실험을 수행하여 흡수속도와 반응속도상수를 구하였다. 반응속도상수는 실험값으로부터 구할 수 있으며 실험은 다양한 실험조건에서 수행되었다. 각각의 흡수제에 대하여 3, 5, 10 wt.%으로 농도가 증가함에 따라 흡수속도는 AMP와 MEA AMP가 MEA에 비해서 약 14~20% 높은 것으로 나타났다. $CO_2$, $SO_2$ 그리고 $NO_2$는 각각의 영역에서 기-액 접촉계면을 통해 액상으로 전달되는 기체의 확산속도와 액상 내에서 일어나는 반응속도의 상대적 크기에 따른 흡수속도를 예측할 수 있다. 또한 $CO_2$ 흡수공정에 있어서 일정분압 이상의 $SO_2$와 $NO_2$는 $CO_2$ 흡수속도 및 흡수용량에 영향이 있기 때문에 흡수탑으로 유입되기 전 복합가스의 분압조정이 반드시 필요할 것으로 판단된다.
PVDF(polyvinylidenefluoride)중공사막 접촉기를 이용한 이산화탄소의 흡수에 관한 수치모사 및 실험을 수행하였다. 흡수제로는 물 또는 모노에탄올아민(monoethanolamine, MEA) 수용액을 사용하였다. 수치모사결과, 막접촉기에서의 이산화탄소의 농도분포는 MEA 수용액을 흡수제로 사용하였을 경우가 물을 흡수제로 사용하였을 경우보다 흡수제 공급속도의 영향을 덜 받았으며, 이산화탄소의 흡수속도 및 물질전달계수는 MEA의 농도가 증가할수록 증가하였다. 실험을 통하여 얻은 이산화탄소의 물질전달계수를 수치모사결과 및 이론치와 비교한 결과, 물을 흡수제로 사용하였을 경우 물질전달계수는 실험값과 수치모사결과, 이론값이 모두 잘 일치하였다. 반면에 MEA 수용액을 흡수제로 사용하였을 경우에는 수치모사결과와 이론값은 잘 일치하였으나, 실험값은 플라즈마로 처리한 경우와 처리하지 않은 경우 모두 수치모사 결과보다 낮은 값을 나타내었다. 그러나 막접촉기에 사용된 중공사막의 내구성은 플라즈마로 처리시킨 막이 플라즈마처리를 수행하지 않은 막보다 우수하였다.
본 연구에서는 지구 온난화 연소폐가스를 모델로 한 $CO_2$-$N_2$혼합 기체의 화학흡수법에 의한 기체 분리 실험을 행하였다. 반회분식 기포부상 반응 장치를 이용하여 최적흡수액의 조건을 탐색하였고, 충진 흡수탑을 이용하여 흡수 속도를 측정, 실험 결과를 이론적 예측값과 비교.분석하여 흡수현상에 대한 적절한 해석을 하고자 하였다. 본 실험에 사용한 흡수제는 Monoethanolamine(MEA)이었고, 대상 기체는 화력발전소의 연소배가스의 주요성분이 $N_2$79%, $CO_2$15%, $O_2$4%인바, $N_2$: $CO_2$가 몰비 85:15의 비율인 모델가스를 혼합기체로 사용하였다. 실험조건하에서 $CO_2$loading과 $CO_2$제거율을 측정하였고, 흡수속도를 구하기 위하여 Enhancement factor를 도입하고 Film 모델과 Higbie 모델을 적용하였다. 흡수액의 최적농도는 4-5 M인 것으로 나타났으며. Higbie model에 의한 흡수속도 예측은 실측치와 잘 일치하여 연소폐가스 중의 고농도 $CO_2$가스의 흡수에 적용이 가능한 것으로 나타났다.
본 연구는 1차 아민(MEA, monoethanolamine)으로 개질한 입자상 활성탄(WSC-470)을 이용하여 실내 저농도 이산화탄소를 제거하고자 하였다. MEA 함침농도(6.1~42.7 wt.%)와 용매제(distillate water, ethanol, methanol) 종류에 따라 제조된 흡착제의 특성분석(BET, pore property, XPS)과 각 흡착제의 $CO_2$가스에 대한 최대 흡착능, 3000 ppm의 저농도 $CO_2$분위기에서의 흡착량을 측정하였다. MEA 농도가 증가할수록 물리적 특성인 비표면적, 공극률, 미세기공률 등은 감소한 반면, 표면 염기도 향상에 기여하는 질소 함량은 증가하였다. 이러한 물성변화로 인해 최대 흡착능은 초기 활성탄(RAC: 3.27 mmol/g) 대비 최대 71%(AC-MM(42.7, 40): 0.937 mmol/g)가 감소한 반면, 저농도 이산화탄소에 대한 선택적 흡착량은 45%(AC-MM(15.3, 40): 0.73 mmol/g)의 향상을 보였다.
Free amino acid in ethanol extracts and total amino acids in hydrolysates of eleven species of edible mushrooms were analyzed and determinated the contents five kind of new amino acid by means of amino acid autoanalyzer and gas liquid chromatography. The result obtained from this study are as follows. 1) Five kind of new amino acid turned out to be ${\alpha}$-aminobutyric acid, allo-isoleucine, ethanolamine, $\gamma$-aminobutyric acid and ornithine. 2) By means of amino acid autoanalyzer, the monoethanolamine was identified on the chromatogram ahead of alanine, ${\alpha}$-aminobutyric acid between peak of threonine and glycine, allo-isoeleucine between peak of valine and leucine, isoleucine, ${\gamma}$-aminobutyric acid followed by proline between peak of leucine, isoleucine and methionine and ornithine between peak of phenylalanine and tyrosine 3) By means of Gas liquid chromatography, the ${\alpha}$-aminobutyric acid was identified on the chromatogram between peaks of alanine and valine, allo-isoleucine between peaks of methionine and isoleucine, monoethanolamine followed by ${\gamma}$-aminobutyric acid between peaks of phenylalanine and ammonia, ornithine between the peaks of ammonia and lysine. 4) Of five amino acids which were identified, ornithine was the highest of its content in the mushroom extracts, and allo-isoleucine, ethanolamine, and ${\gamma}$-aminobutyric acid came next in decreasing order. 5) Also which were identified, ornithine was the highest of its content in the hydrolysates, and ${\alpha}$-aminobutyric acid, ${\gamma}$-aminobutyric acid, allo-isoleucine came next in decreasing order, ethanol extracts and hydrolysates of Auriculariaauricula-Judae(Fr.) $Qu\acute{e}l$ species didn't contain any of five kind of new amino acid. Ornithine also was the highest in the hydrolysates of ll mushrooms.
This study was conducted to examine whether a specific synthetic metalworking fluid (MWF), "A", in use for 10 months without replacement, displayed microbial resistance and to identify the additives associated with the control of microbial growth. Three synthetic MWF products ("A", "B", and "C") were studied every week for two months. Microbial deterioration of the fluids was assessed through evaluation by endotoxin, bacteria and fungi levels in the MWFs. In addition, formaldehyde, boron, ethanolamine, and copper levels were also studied to determine whether they influence microbial growth in water-based MWFs. Throughout the entire study in the sump where MWF "A" was used, bacteria counts were lower than 103 CFU/mL, and endotoxins never exceeded 103 EU/mL. These levels were significantly lower than levels observed in sumps badly deteriorated with microbes. Boron levels in MWF "A" ranged from 91.7 to 129.6 ppm, which was significantly higher than boron levels found in other MWF products. The total level of ethanolamine (EA) in MWF "A" ranged from 35,595 to 57,857 ppm (average 40,903 ppm), which was over ten times higher than that found in other MWFs. Monoethanolamine (MEA), diethanolamine (DEA) and triethanolamine (TEA) concentrations in MWF "A" were also significantly higher than seen in other MWFs. However, although EA and boron might improve anti-microbial performance, their abuse can pose a serious risk to workers who handle MWFs. From an industrial hygiene perspective, our study results stress that the positive synergistic effect of boron and EA in reducing microbial activity in MWF must be balanced with the potentially negative health effects of such additives. Our study also addresses the disadvantage of failing to comprehensively report MWF additives on Material Safety Data Sheets (MSDS). Future research in MWF formulation is needed to find the best level of EA and boron for achieving optimal synergistic anti-microbial effects while minimizing employee health hazards.
Celgard 및 Durapore 막을 플라즈마로 처리하여 막의 소수성 및 아민용액에 대한 저항성을 조사하였다. 플라즈마 기체(또는 증기)로는 $CF_4$, Hexafluorobenzene(HFP), Pentafluoropyridine(PFP) 그리고 Hexamethyldisiloxane(HMDS)를 사용하였다. 플라즈마로 처리시킨 막의 표면구조는 FT-IR 스펙트럼을 이용하여 분석하였다. 플라즈마로 처리시킨 막의 물에 대한 접촉각은 플라즈마 기체의 종류에 따라 다른 특성을 나타내었다. Celgard와 Durapore 모두 HFB이나 PFP의 플라즈마로 처리하였을 경우에는 접촉각이 감소하였으나, $CF_4$ 또는 HMDS의 플라즈마로 처리하였을 경우에는 플라즈마로 처리하지 않은 경우보다 접촉각이 증가하였다. Monoethanolamine(MEA)용액에 대한 저항성은 Celgard의 경우에는 플라즈마로 처리하였을 경우가 순수한 Celgard보다 낮았으나, Durapore는 $CF_4$ 플라즈마로 처리하였을 경우 MEA에 대한 저항성이 증대되었다.
모노에탄올아민(MEA)으로 대표되는 습식 아민을 이용한 이산화탄소 포집 공정은 기술적 신뢰도가 높아 초기 CCS(Carbon Capture & Storage) 시장을 주도할 것으로 전망된다. 다만 흡수제 재생에 에너지 소비가 많은 점이 단점으로 지적 받고 있어 흡수제 재생 에너지 절감을 위한 다양한 공정 개선안이 연구되고 있다. 본 논문에서는 MEA 공정에서 흡수탑으로 유입되는 배가스를 분할 유입하는 공정 개선안을 제안 하고 시뮬레이터를 이용한 공정모사를 통하여 그 효과를 보였다. 배가스를 분할 유입한 결과 흡수탑 하단부에서 냉각효과가 있었고 이로 인해 흡수제 유량이 감소하였다. 배가스 분할 비와 분할 유입 단 높이를 변경하며 최적 분할 조건을 찾았으며 이때 흡수제 유량은 6.4%, 재생 에너지는 5.8% 감소하였다.
MEA(monoethanolamine)와 PZ(piperazine)를 함침한 성형 제올라이트 13X 흡착제를 이용하여 연소배가스 중 이산화탄소를 분리하고자 하였다. 이를 위해 MEA, PZ를 각각 30, 50, 70 wt%로 성형 제올라이트에 함침하였다. 함침된 성형 제올라이트 13X 흡착제에 대한 물성 평가를 위해 XRD, FT-IR, BET를 이용하였다. 이산화탄소 분리특성을 조사하기 위하여, 성형 제올라이트, MEA 함침 성형 제올라이트, PZ 함침 성형 제올라이트에 대하여 25, 50, $75^{\circ}C$에서 흡착능을 조사하였다. 아민 함침 성형 제올라이트 흡착제는 온도가 증가할수록 흡착능은 감소한다. 최종적으로 연소배가스의 배출온도인 $50^{\circ}C$에서 흡착능을 비교할 때, PZ가 함침된 성형 제올라이트는 성형 제올라이트보다 1.8배 그리고 MEA 함침된 성형 제올라이트보다 20배 이상의 이산화탄소 흡착능을 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.