• 한국멀티미디어학회논문지
• /
• 제11권10호
• /
• pp.1376-1384
• /
• 2008

망의 자동형성에 대한 많은 연구들은 주로 무선 센서 망과 애드혹 망에 대해 수행되었으며 그 결과들은 아직까지 공장자동화에 적용되지 못하였다. 본 논문은 블루투스 통신과 PDA(Personal Digital Assistant)를 이용하여 조업자의 위치에 종속됨 없이 공정 환경을 감시, 제어하는 공정 관리 시스템의 개발에 관하여 기술한다. 이는 유선망을 사용할 수 없는 회전체의 설비진단에 필수적이다. 모바일 단말이 공정관리 서버의 통신 범위에 접근하면 서버는 이동 단말의 존재를 인지하여 스스로 네트워크를 형성한다. 사용자에 대한 인증과정을 거쳐 모바일 단말의 소유자 권한에 따른 모니터링 제어 프로그램을 자동으로 다운로드하여 설치한다. 또한 모바일 단말이 서버의 통신 반경을 벋어나게 되면 네트워크에서 제외하고 프로그램을 자동으로 삭제하여 리소스를 줄이고 모바일 단말의 분실 시 발생할 수 있는 보안상의 문제를 방지한다. 개발된 기능들은 공장 시뮬레이터에서 동작을 확인하였다.

• 방사선산업학회지
• /
• 제5권2호
• /
• pp.185-189
• /
• 2011

As nuclear industry has been developed, a various types of radiological contamination has occurred. After 9.11 terror in U.S.A., it has been concerned that terrorists' active area has been enlarged to use nuclear or radioactive substance. Recently, the most powerful earth-quake stroke, which triggered a massive tsunami in Japan and then Fukushima nuclear power plant reactor has suffered from a serious accident in history. The Fukushima reactor accident has occurred an anxiety of radiation leaks and about 170,000 people have been evacuated from the accidental area near the nuclear power plant. For these reasons, a social chaos can be occurred if radiological contamination occurs to the supply system for the drinking water. As such, the establishment of the radiation monitoring system for the city main water system is compelling for the national security. In this study, a feasibility test of radiation monitoring system which consists of unified hybrid-type radiation detectors was experimented for multi detection system by using gamma-ray imaging. The hybrid-type radiation sensors were fabricated with CsI(Tl) scintillators and photodiodes. A preamplifier and amplifier was also fabricated and assembled with the sensor in the shielding case. For the preliminary test of detection of radiological contamination in the river, multi CsI(Tl)-PIN photodiode radiation detectors and $^{137}Cs$ gamma-ray source were used. The DAQ was done by Linux based ROOT program and NI DAQ system with Labview program. The simulated contamination was assumed to be occurred at Gapcheon river in Daejeon city. Multi CsI(Tl)-PIN photodiode radiation detectors were positioned at the Gapcheon river side. Assuming that the radiological contaminations flows in the river the $^{137}Cs$ gamma-ray source has been moved and then, the contamination region was reconstructed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.395-400
• /
• 2004

For the purpose of monitoring by ultrasonic test of the ball bearing conditions in rotating machinery, a system for their diagnosis was developed. ultrasonic technique is used to detect abnormal conditions in the bearing system. And various data such as frequency spectrum, energy and amplitude of ultrasonic signals, and ultrasonic parameters were acquired during experiments with the simulated ball bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was established. Bearing diagnosis system is composed of four parts as follows : sensing part for ultrasonic sensor and preamplifier, signal processing part for measuring frequency spectrum, energy and amplitude, interface part for connecting ultrasonic signal to PC using A/D converter, graphic display and software part for display of bearing condition and for managing of diagnosis program.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.915-919
• /
• 2005

It is materialized an unmanned vehicle system as a part of Intelligent Transportation System (ITS) which is a fundamental constituent for unmanned vehicle. Remote control system, monitoring system and remote operating system which are consisted of unmanned vehicle system. Network program by TCP/IP socket, and real-time control & operating controlled by servo-motors from a remote place, those are used to verify safety and stability of the unmanned vehicle system in this research. This unmanned vehicle is divided into two major sections which are an unmanned vehicle part and control station part. The server PC is installed on the unmanned vehicle and a client PC is installed at a remote place, which can control the u manned vehicle. In this research work, main theme is that we experimented and tested to check the speed and utilization of the wireless LAN communication.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1307-1309
• /
• 2003

The EO-1 spacecraft, launched November 21, 2000 into a sun synchronous orbit behind Landsat 7, hosts advanced technology demonstration instruments, whose capabilities are currently being assessed by the user community for future missions. A significant part of the EO-1 program is to perform data comparisons between Hyperion, ALI and Landsat 7 ETM+. In this paper, a comparison of forest classification results from Hyperion, ALI, and the ETM+ of Landsat-7 are provided for Wangqing Forest Bureau, Jilin Province, Northeast China. The data have been radiometrically corrected and geometrically resampled. Feature selection and statistical transforms are used to reduce the Hyperion feature space from 86 channels to 14 features. Classes chosen for discrimination included Larch, Spruce, Oak, Birch, Popular and Mixed forest and other landuses. Classification accuracies have been obtained for each sensor. Comparison of the classification results shows : Hyperion classification results were the best, ALI's were much better than ETM+.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.86.5-86
• /
• 2001

This work describes a design and implementation of the level & flow rate control system by using a single-chip microcontroller. The proposed model system is designed based on the use of the single-chip microcontroller 8031 with the EPROM emulator for programming the computer software. The microcontroller reaches the input level and flow signals from the level sensor and the turbine flowmeter, respectively, via the signal conditioning circuits and A/D converters in order to calculate the control signal. Moreover, the status of the process variable can easily be set up and controlled by program monitoring through the emulator, and can be graphically displayed on the computer screen. Experiment results were carried out which can be ...

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1055-1061
• /
• 2004

In this research, a vision system for detecting breakages of small-diameter taps, which are rarely detected by the indirect in-process monitoring methods such as acoustic emission, cutting torque and motor current, was developed. Two HMI (Human Machine Interface) programs to embed the developed vision system into a Siemens open architecture controller, 840D, were developed. They are placed in sub-windows of the main window of the 840D and can be activated or deactivated either by a softkey on the operating panel or the M code in the NC part program. In the event that any type of tool breakage is detected, the HMI program issues a command for an automatic tool change or sends an alarm signal to the NC kernel. An evaluation test in a high-speed tapping machine showed that the developed vision system was successful in detecting breakages of small-diameter taps up to M1.

• 센서학회지
• /
• 제13권5호
• /
• pp.383-391
• /
• 2004

In this study, we implemented the pulse transit time (PTT) system to examine usefulness of the monitoring method of distensibility and elasticity using photoplethysmography sensor in vivo. PTT is defined as the time interval between the peak of QRS complex in ECG signal and the maximum slope point of photoplethysmography. these two signals were converted to digital data by means of AID converter, then PTT was evaluated by heartbeat using PC. Results of analysis were displayed as a graph using spline interpolation method. The variance of PTT was measured repetitiously to verify efficiency of PTT system in resting state and hyperemic state. Repeated measurement of PTT was not same value but showed that coefficients of correlation were related with each other as 0.8302 (P<0.01) in resting state. And also repeated measurement of PTT showed significant correlation as 0.868 (P<0.01) in the hyperemic state. These result showed that PTT is reflect on transient pressure variance in the artery and is very useful method for the evaluation of prognosis of the hypertension and arteriosclerosis.

• 대한의용생체공학회:의공학회지
• /
• 제28권4호
• /
• pp.494-502
• /
• 2007

Ubiquitous location based services (u-LBS) will be interested to an important services. They can easily recognize object position at anytime, anywhere. At present, many researchers are making a study of the position recognition and tracking. This paper consists of postion recognition and user identification system. The position recognition is based on location under services (LBS) using a signal strength map, a database is previously made use of empirical measured received signal strength indicator (RSSI). The user identification system automatically controls instruments which is located in home. Moreover users are able to measures body signal freely. We implemented the multi-hop routing method using the Star-Mesh networks. Also, we use the sensor devices which are satisfied with the IEEE 802.15.4 specification. The used devices are the Nano-24 modules in Octacomm Co. Ltd. A RSSI is very important factor in position recognition analysis. It makes use of the way that decides position recognition and user identification in narrow indoor space. In experiments, we can analyze properties of the RSSI, draw the parameter about position recognition. The experimental result is that RSSI value is attenuated according to increasing distances. It also derives property of the radio frequency (RF) signal. Moreover, we express the monitoring program using the Microsoft C#. Finally, the proposed methods are expected to protect a sudden death and an accident in home.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.465-468
• /
• 2007

센서 네트워크 시스템 기반의 저 전력, 저 비용의 지능형 홈 네트워크 시스템을 설계 및 구현 하였다. RSSI(Received Signal Strength Indicator)기반의 사용자 실내 위치 추적 시스템과 Dynamic multi-hop routing 시스템, 학습형 통합 리모컨을 활용한 능동적 가전기기 제어 시스템을 각각 설계하여 지능형 홈 네트워크 시스템을 구현 하였다. 지능형 서비스를 위해 반드시 팔요한 사용자 위치 정보는 RSSI기반의 삼각측량을 통해 계산하고 측정된 위치 정보값의 오차를 줄이기 위해 Smoothing Algorithm을 적용하였다. 또한 지능형 홈네트워크 서비스 제공을 위해 사용자가 휴대하는 무선 센서노드를 Layout 하여 설계, 제작하였으며 수집된 사용자의 실시간 위치 정보와 환경 센서 데이타는 Dynamic multi-hop routing을 통해 서버 프로그램으로 전달되며 각종 계산을 통해 사용자 위치정보와 환경 정보가 디스플레이 된다.