• Smart Structures and Systems
• /
• v.3 no.1
• /
• pp.69-88
• /
• 2007

In this study, Field-Programmable Gate Arrays (FPGAs) are investigated as a practical solution to the challenge of designing an optimal platform for implementing algorithms in a wireless sensing unit for structuralhealth monitoring. Inherent advantages, such as tremendous processing power, coupled with reconfigurable and flexible architecture render FPGAs a prime candidate for the processing core in an optimal wireless sensor unit, especially when handling Digital Signal Processing (DSP) and system identification algorithms. This paper presents an effort to create a proof-of-concept unit, wherein an off-the-shelf FPGA development board, available at a price comparable to a microprocessor development board, was adopted. Data processing functions, including windowing, Fast Fourier Transform (FFT), and peak detection, were implemented in the FPGA using a Matlab Simulink-based high-level abstraction tool rather than hardware descriptive language. Simulations and laboratory tests were carried out to validate the design.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.02a
• /
• pp.51-59
• /
• 2004

The geological research as a part of HLW disposal program in Korea is carried out to provide necessary data for the establishment of the reference repository system in term of design and safety assessment in the crystalline rock terrains. Six deep boreholes were drilled to obtain hydrogeological and hydrochemical data from Jurassic granites in the Yuseong area, Korea. The core observation, televiewer logging and hydraulic testing were carried out during and after drilling and multi-packer system were installed in the boreholes of 500m depth for hydraulic and hydrochemical monitoring including environmental isotopes. The integration of hydrogeochemical and hydrodynamic data would be built greater confidence for the understanding of groundwater system in fractured rock mass. This geoscientific program could be possible to suggest a general guideline to develop the reference disposal concept of high-level radioactive waste in Korea.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.427-432
• /
• 2007

This paper research data and information for market environment of electric power value added service According to research, in USA using power line communication(PLC) and other communication device(ex ZigBee, Wireless and so on) online observation and building district management service were being realized Also, in Japan they are executing online electricity facility Igr monitoring service based on IT basic for checking insulation. Also we conduct a survey of H-SCP concept and demand for electric power value added service of Housewife and Working women. This paper will be used data for revitalizing market circumstance of electric power value added service.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.382-385
• /
• 2004

Communication Ocean Meteorological Satellite (COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service is planned to be launched onto Geostationary Earth Orbit in 2008 according to the Korea national space program. A feasibility study on the solar constraint in the operation of the COMS meteorological imager (MI) is performed using the GOES imager hardware operation characteristics. The Earth observation areas of the MI are introduced and the observation time of the MI observation area is calculated. The sun light can enter into the MI optical system around the local midnight and impinge on the performance of the MI. The solar eclipse viewed from the satellite occurs near local midnight around the equinox. This study discusses the restriction of imaging operation time that should be considered in order to avoid the solar intrusion about local midnight and to keep acceptable image quality for the MI observation areas. This study could be useful to build the operation concept of the MI during the development of the MI.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.77-80
• /
• 2004

In this study the spatial distribution characters of burnt forest site was first considered by analyzing spatial data and monitoring forest landscape before/after lire to restore the site. Then suitable tree species on each forest site should be selected through the weighted score analysis of GIS analysis methods. Finally. the best forest stand arrangement method could be simulated on the system for the advanced reforestation technology in Korea. For this purpose, the virtual reforestation system was implemented by using the concept of virtual GIS and CBD (Component Based Development) method. By use of this system the change of forest landscape of burnt forest area some years after reforestation practice could be detected and monitored by applying the site index and 3D modeling method.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.60-63
• /
• 2006

Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of oceancolor around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. In this paper radiometric calibration concept of the GOCI is introduced. The GOCI radiometric response is modeled as a nonlinear system in order to reflect a nonlinear characteristic of detector. In this paper estimation approaches for radiometric parameters of GOCI model are discussed. For the GOCI, the offset signal depends on each spectral channel because dark current offset signal is a function of integration time which is different from channel to channel. The offset parameter can be estimated by using offset signal measurements for two integration time setting is described.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.6
• /
• pp.361-368
• /
• 2010

Due to the insulation and the air-tightness requirement in modern buildings have resulted NBS(New Building Syndrome) and SBS(Sick Building Syndrome) of IAQ problems. Therefore, energy efficient way of solving such IAQ issues are of major concern in these days and building industries. This paper introduces a method to improve thermal performance with a DI(Dynamic Insulation) concept. The characteristic of the dynamic insulation is that the lower U-value as the higher air velocity through the DI in a micro level. A thermal performance monitoring study has been conducted to show the energy impact of porous DI over the static insulation material. The results show that up to 45% could be improved in the case with DI compared to the conventional insulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1123-1126
• /
• 2005

This paper introduces the key features of NCS (Network based Control System), which is quite a new concept in the industrial automation market. Two control systems "DCS" and "PLC" have been recognized as control systems used for process and factory automation during the past decades. However, the market requires more complex functionality, such as monitoring and operation, alarm handling and notification from remote locations using the Web or e-mail. Besides enhancing functionality, interoperability between each device and system is highly required since network and engineering tools provided by many vendors do not cooperate with each others, so that lots of conversion, reconfiguration and reprogramming are required when expanding systems. NCS can meet this requirement, installing leading-edged IT technology using international standards for network and engineering environment. NCS, which is a harmony of web functionality, networkability and a reliable control function, enables information integration and responding to the market's requirements with agility and high reliability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.344-348
• /
• 1992

This paper presents a new methodology for on-line tool breakage detection by sensor fusion concept of an acoustic-emission (AE) sensor. A built-in piezoelectric force sensor was used to measure cutting force instead of a tool dynamometer to preserve the machine tool dynamics. he sensor was inserted in the tool turret housing of an NC lathe. FEM analysis was carried out to locate the most sensitive position for the sensor. When a tool is broken, the explicit changes of signals' pattern take place. A burst-type AE signal increases abruptly. Followingly, a cutting force drops significantly. Therefore a burst of AE signal is used as a triggering signal to inspect the following cutting force. Significant drop of cutting force is utilized to detect tool breakage. The algorithm was implemented in a DSP board for in-process tool breakage detection. The proposed monitoring system was capable of a good applicable tool breakage detection.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.10-14
• /
• 2008

The robot localization problem is a key problem in making truly autonomous robots. In this work we provide thorough discussions of Ultrasonic Positioning System can be applied to the localization problem. First, we look at the use of Kalman filters and basic concept and the equation involved in Kalman filters. Secondly, we create understanding of how the Kalman filters can be implemented in robot localization. We show our discussion and experiments how Kalman filters applied to the localization problem. Lastly, we perform simulations using Usat Wheel Chair robot in our own general Kalman filters robot monitoring software.