• 한국환경복원기술학회지
• /
• 제24권6호
• /
• pp.97-107
• /
• 2021

Abnormal climate caused by climate change causes enormous social and economic damage. And such damage and its impact may vary depending on the location and regional characteristics of the region and the social and economic conditions of local residents. Therefore, it is necessary to continuously monitor whether there are indicators that are weaker than other regions among the detailed indicators that constitute the risk, exposure and vulnerability of climate change risk. In this study, the concept of climate change risk was used for heatwave to determine regional inequality of climate change risk. In other words, it was judged that inequality in climate change risk occurred in regions with high risk but high exposure and low vulnerability compared to other regions. As a result of the analysis, it was found that 13 local governments in Korea experienced regional inequality in climate change risk. In order to resolve regional inequality in climate change risks, the current status of regional inequality in climate change should be checked based on the analysis proposed in this study, there is a need for an evaluation and monitoring system that can provide appropriate feedback on areas where inequality has occurred. This continuous evaluation and monitoring-based feedback system is expected to be of great help in resolving regional inequality in climate change risks.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3898-3906
• /
• 2023

The paper notes that the most common way of handling spent nuclear fuel (SNF) of power reactors is its temporary long-term dry storage. At the same time, the operation of the dry spent fuel storage facilities almost never use the modern capabilities of information systems in safety control and collecting information for the next studies under implementation of aging management programs. The author proposes a structure of an information system that can be implemented in a dry spent fuel storage facility with ventilated storage containers. To control the thermal component of spent fuel storage safety, a database structure has been developed, which contains 5 tables. An algorithm for monitoring the thermal state of spent fuel was created for the proposed information system, which is based on the comparison of measured and forecast values of the safety criterion, in which the level of heating the ventilation air temperature was chosen. Predictive values of the safety criterion are obtained on the basis of previously published studies. The proposed algorithm is an implementation of the information function of the system. The proposed information system can be used for effective thermal monitoring and collecting information for the next studies under the implementation of aging management programs for spent fuel storage equipment, permanent control of spent fuel storage safety, staff training, etc.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.9-17
• /
• 2017

Concept development of a real-time Field Programmable Gate Array (FPGA)-based switched Ethernet data communication network for the Man-Machine Interface System (MMIS) is presented in this paper. The proposed design discussed in this research is based on the systems engineering (SE) approach. The design methodology is effectively developed by defining the concept development stage of the life-cycle model consisting of three successive phases, which are developed and discussed: needs analysis; concept exploration; and concept definition. This life-cycle model is used to develop an FPGA-based time-triggered Ethernet (TTE) switched data communication network for the non-safety division of MMIS system to provide real-time data transfer from the safety control systems to the non-safety division of MMIS and between the non-safety systems including control, monitoring, and information display systems. The original IEEE standard 802.3 Ethernet networks were not typically designed or implemented for providing real-time data transmission, however implementing a network that provides both real-time and on-demand data transmission is achievable using the real-time Ethernet technology. To develop the design effectively, context diagrams are implied. Conformance to the stakeholders needs, system requirements, and relevant codes and standards together with utilizing the TTE technology are used to analyze, synthesize, and develop the MMIS non-safety data communication network of the APR1400 nuclear power plant.

• Smart Structures and Systems
• /
• 제12권3_4호
• /
• pp.291-308
• /
• 2013

A novel concept of transmissibility based on a wavelet transform for structural damage detection is presented in this paper. The main objective of the research was the development of a method for detecting slight damage at the incipient stage. As a vibration-based approach, the concept of transmissibility has attracted considerable interest because of its advantages and effectiveness in damage detection. However, like other vibration-based methods, transmissibility-based approaches suffer from insensitivity to slight local damage because of the regularity of the traditional Fourier transform. Therefore, the powerful signal processing techniques must be found to solve this problem. Wavelet transform that is able to capture subtle information in measured signals has received extensive attention in the field of damage detection in recent decades. In this paper, we first propose a novel transmissibility concept based on the wavelet transform. Outlier analysis was adopted to construct a damage detection algorithm with wavelet-based transmissibility. The feasibility of the proposed method was numerically investigated with a typical six-degrees-of-freedom spring-mass system, and comparative investigations were performed with a conventional transmissibility approach. The results demonstrate that the proposed transmissibility is more sensitive than conventional transmissibility, and the former is a promising tool for structural damage detection at the incipient stage.

• 한국정보전자통신기술학회논문지
• /
• 제10권5호
• /
• pp.424-434
• /
• 2017

산업 무선 센서 네트워크에서는 많은 응용들이 복합적인 서비스 품질 지원을 요구한다. 본 논문에서는 산업 무선 센서 네트워크에서 실시간 서비스의 신뢰성을 향상시키기 위하여 기회적 실시간 모니터링 데이터 전달 프로토콜을 제안한다. 전송 실패를 복구하기 위해 가장 많이 알려진 재전송 기법들은 실시간 요구사항에 위배되는 추가적 딜레이를 발생시키기 때문에 실시간 데이터 전달에 적절치 않다. 제안 프로토콜은 무선 네트워크의 브로드캐스팅 특성과 시간적 기회 제공 방법을 사용한다. 브로드캐스팅 특성을 통해서 라디오 반경 내 모든 이웃에게 전달하고, 시간적 기회 제공 방법으로 중계 우선순위를 정하여 모든 노드들이 중계 기회를 얻을 수 있게 한다. 제안 방안은 최대한 많은 노드가 라우팅에 참여하여 실시간 데이터 전송 확률을 높인다. 시뮬레이션을 통하여 제안 방안이 실시간 데이터 전송과 신뢰성 측면에서 우월함을 보인다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1100-1109
• /
• 2006

In this study, two different technologies which can measure temperature simultaneously at many points are introduced. One is to use a thermal sensor cable that is comprised of addressable thermal sensors connected in parallel within a single cable. The other is to use an optic fiber with Distributed Temperature Sensing (DTS) system. The difference between two technologies can be summarized as follows. A thermal sensor cable has a concept of 'point sensing' that can measure temperature at accurate position of a thermal sensor. So the accuracy and resolution of temperature measurement are up to the ability of the thermal sensor. Whereas optic fiber sensor has a concept of 'distributed sensing' because temperature is measured by ratio of Stokes and anti-Stokes component intensities of Raman backscatter that is generated when laser pulse travels along an optic fiber. It's resolution is determined by measuring distance, measuring time and spatial resolution. The purpose of this study is that application targets of two temperature measurement techniques are checked in technical and economical phases by examining the strength and weakness of them. Considering the functions and characteristics of two techniques, the thermal sensor cable will be suitable to apply to the assessment of groundwater flow, geothermal distribution and grouting efficiency within 300m distance. It is expected that the optic fiber sensor can be widely utilized at various fields (for example: pipe line inspection, tunnel fire detection, power line monitoring etc.) which need an information of temperature distribution over relatively long distance.

• 한국항공우주학회지
• /
• 제49권12호
• /
• pp.1027-1035
• /
• 2021

본 논문에서는 한반도 주변의 미세먼지 관측 임무를 위한 3U 큐브위성인 MIMAN 설계안을 제시하였다. MIMAN의 주요 임무 목표는 높은 공간 해상도로 한반도 주변의 미세먼지를 관측하는 것이다. 이를 통해 천리안위성 2B호 데이터에서 구름을 제거할 수 있는 보조 자료를 제공하는 것이 최종 목표이다. 본 연구에서는 임무를 정의하고 임무 요구조건 및 제한 조건을 도출하였다. 운용 개념을 정의하였으며, 안정적인 운용을 위해 통신 안정성을 고려하였다. 위성에 문제가 생겼을 경우, 이를 지상에서 해결할 수 있도록 모든 운용 모드에서 UHF 통신이 가능하도록 설계하였다. 임무와 운용 개념 설계 결과를 바탕으로 시스템 설계안을 도출하였다. 시스템 요구조건을 만족시킬 수 있는 시스템 설계안 및 인터페이스를 제시하였다. 시스템 인터페이스의 경우 각 하드웨어의 데이터 특성을 고려하여 설계하였다. 시스템 버짓 분석을 수행하였으며, 이를 통해 시스템 안정성을 확인하였다.

• 융합보안논문지
• /
• 제22권2호
• /
• pp.51-57
• /
• 2022

최근 제로 트러스트에 대한 개념이 도입되며 차세대 보안관제 시스템에 필요한 보안 요소 강화가 필요하다. 또한, 4차 산업혁명 시대의 보안 패러다임도 바뀌고 있다. 클라우드 컴퓨팅과 코로나 19로 인해 업무 환경이 변화되면서 발생하는 사이버보안 문제는 지속 발생하고 있다. 그리고 이와 동시에 새로운 사이버 공격기법들도 지능화 고도화되고 있는 상황에서 보안을 강화할 미래의 보안관제 시스템이 필요하다. 제로 트러스트 보안 개념은 모든 것을 의심하며 신뢰하지 않는다는 개념을 기반으로 모든 통신을 감시하고 접근 요청자에 대한 엄격한 인증과 최소한의 접근 권한을 핵심으로 보안성을 높인다. 본 논문에서는 기존 보안관제 시스템의 문제점을 이해하고 이를 해결할 수 있는 제로 트러스트 보안 모델을 통해 보안관제 분야의 보안 강화 방안을 제안 한다.

• 한국환경복원기술학회지
• /
• 제7권4호
• /
• pp.32-43
• /
• 2004

Targeting a rooftop biotope created in urban area, this study aims at verifying a creation technique reflecting an urban biosphere reserve concept as well as its function as the habitats of various wild animals. To this end, a set of processes of a biosphere reserve-based basic conception and master plan, sectoral plans, construction and monitoring were applied to the rooftop of 12-story UNESCO Building in Seoul. In particular, the rooftop habitats were divided into core area, buffer zone and transition area, and habitats and facilities suitable to the characteristics of each space were planned. By aligning a plantation planning map with environmental conditions such as topography and water, creation of diverse habitats was enabled. As a result, a set of various habitats including wetlands, wild grassland, shrubs, forest trees and vegetable fields was created at the site. Species living in these habitats included 148 plant species, 62 insect species, 2 amphibian species, 3 fishery species and 3 bird species. The rooftop eco-park of UNESCO Building, which was created one year ago, is assessed as an important space for conservation of biodiversity as well as a place where a biosphere reserve concept was well applied. Meanwhile, for this rooftop biotope to be a pioneer of urban biosphere reserve-based types, a number of principles & methodologies suggested in this study need to be applied, In a perspective of landscape ecology, maintenance efforts should be linked with green areas in neighboring areas, which are the sources of species, In addition, considering that the rooftop biotope is a restored ecosystem, theories and approaches from restoration ecology should be applied. On-going monitoring on environmental changes is also required as the site is located in the urban center, Ultimately, rooftop biotopes including the case study area should contribute in promoting the socio-economic, cultural, and spiritual sustainability as well as environmental sustainability of a city.

• 대한간호학회지
• /
• 제28권3호
• /
• pp.751-759
• /
• 1998

The study of the validity test on the self-monitoring scale for nurses In this study, both the literary survey as well as empirical research has been executed to test the validity of the scales that measure the construct of the self-monitoring scale. The self-monitoring scale could not be classified into five factors as Snyder suggested. Many other scholars (Briggs, Cheek and Buss, 1980) suggested 3 different classifications which was accepted by Snyder and Gangestad (1986). John, Cheek and Klohnen(1996) claimed a two-factor classification. As has been discussed, factor analysis is used to prove convergent validity within the factor and discriminant validity between the factors. However, depending on the researchers, many variations in classification of the factors were found and a lack of content and discriminant validity were found in the previous research findings. It is also important to note that Snyder's self-monitoring scale did not factor-load at over. 30 for all 25 items, regardless of how many factors could be classified. According to findings of this study, the self-monitoring scale neither classified as five, three or two factors nor factor loaded as hypothesized. It is also clear that Snyder's self-monitoring scale lacks convergent validity as the sub-factors of the scale failed to prove its uni-dimensionality. The A self-monit oring scale not only fail to overcome the problems of Snyder's self-monitori ng scale but even lost the attractiveness of the self-monitoring scale. In this study it was also found that the A self-monitoring scale was not classified in either in a two or three-factor classification as hypothesized. It is, of course, not desirable to use any scale that lacks convergent and discriminant validity even though it has been widely used and has held a great deal of influence on the field of social psychology. To overcome the shortcomings of Snyder's self-monitoring scale, Lennox and Wolfe(1984) suggested 13 items. This study was dedicated to test the validity and reliability of the scale, in which we found that the data presented in validity as the two factors were class ified and loaded as expected. Reliability was also proven by checking Cronbach's α for each factor and for the total items. In addition, a confirmatory factor analysis was executed for the 13 items using LISREL 8.12 program to confirm convergent validity in a two-factor classification. The model was fitting and sound : however, the self-monitoring scale was unfitted and not validated. Thus, it is recommended to use not the original nor the abbreviated self-monitoring scale but the 13 items in future studies. It should also be noted that items 7 and 13 should be removed to obtain better uni-dimensionality for the 13 items. These items loaded at over. 30, too high for the two factors in the test results of Factor analysis. In addition, it is necessary to double-check the cause of two-hold loading at over .30 for the two factors. It could be a problem caused by data or by the scale itself. Therefore, additional studies should follow to better clarify this matter.