• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.733-741
• /
• 2014

The integration of photovoltaic (PV) energy sources into DC grid has gained considerable attention because of its enhanced conversion efficiency with reduced number of power conversion stages. During the integration process, a local control unit is normally included with every power conversion stage of the PV source to accomplish the process of maximum power point tracking. A centralized monitoring and supervisory control unit is required for monitoring, power management, and protection of the entire system. Therefore, we propose a field-programmable gate array (FPGA) based centralized control unit that integrates all local controllers with the centralized monitoring unit. The main focus of this study is on the process of integrating many local control units into a single central unit. In this paper, we present design and optimization procedures for the hardware implementation of FPGA architecture. Furthermore, we propose a transient analysis and control design methodology with consideration of the nonlinear characteristics of the PV source. Hardware experiment results verify the efficiency of the central control unit and controller design.

• 전기학회논문지P
• /
• 제64권2호
• /
• pp.50-56
• /
• 2015

This paper presents a smart monitoring technique for photovoltaic power systems by using wire and wireless communication networks in which the RS-232/484 and the Zigbee communication networks are inherently established respectively. In the proposed monitoring systems, environmental data sequences and the output power measured by sensors in photovoltaic systems are transferred to PC systems via two communication networks. We made electronic hardware boards for sensors and communication networks to construct its real-time monitoring system and carry out experiments for demonstrating reliability of the proposed monitoring system.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권12호
• /
• pp.792-797
• /
• 2015

효과적인 모니터링은 시스템을 진단하여 안정성을 향상시킨다. 하지만 타겟 시스템이 고장나거나 모니터링 시스템이 악의적인 공격을 당하면 신뢰성 있는 모니터링을 할 수 없다. 본 논문에서는 가상화를 이용하여 타겟 시스템이 고장나도 지속적인 모니터링이 가능한 시스템을 구현하고 해당 프레임워크를 제안한다. 제안한 프레임워크는 동적 바이너리 계측을 이용하였고, 하이퍼바이저 계층에서 해당 작업을 수행하기 때문에 상위에 있는 운영체제 종류에 상관없이 사용가능한 유연성과 격리성으로 시스템의 안정성을 보장한다. 또한 특별한 디버깅 장비가 필요 없기 때문에 모니터링 비용 면에서 이점을 가져올 수 있다. 본 프레임워크의 소개와 함께 이를 사용한 디버깅 기능을 소개한다. 모니터링 시스템으로 인한 오버헤드를 알기 위해 연산 성능, 메모리 성능, 메모리 대역폭을 측정하였으며 메모리 성능에서 추가 오버헤드가 2% 발생했다.

• 전자공학회논문지SC
• /
• 제44권5호
• /
• pp.30-37
• /
• 2007

수질 감시를 위한 물벼룩 활동량 측정을 실시간으로 측정하는 하드웨어를 구현 하였다. 물벼룩은 수질 감시에 빈번히 시용하는 살아있는 생물학적 센서라고 할 수 있다. 물벼룩은 수질이 오염이 되면 활동량의 변화가 나타나기 때문에 물벼룩의 활동량을 감시함으로서 해당 수질의 독성 물질의 유입을 즉각 확인할 수 있다. 물벼룩의 활동량 조사는 기존의 방법은 LED를 이용한 발광부와 Photo TR.을 이용한 수광부를 사용하는 방법이 있으나 물벼룩이 빛에 민감하게 반응하고 측정 대상인 물벼룩을 기준에 두고 2 개의 장치(발광부와 수광부)를 두는 불편한 점이 있었다. 본 논문은 기존의 방식을 대체하기 위해 CCD 카메라를 사용한다. CCD 카메라의 영상처리를 위해 이미지 버퍼에 저장한 후 컴퓨터나 DSP를 사용하여 소프트웨어로 일괄 처리를 하는 것이 아니라 실시간으로 하드웨어로 처리하는 시스템을 구현하였다. 그리고 구현된 하드웨어로 수질 경보를 위한 원격 모니터링 임베디드 시스템을 구축하였다.

• 한국항행학회논문지
• /
• 제16권2호
• /
• pp.278-286
• /
• 2012

향후 대용량 정보 제공 서비스를 위한 선박용 광 네트워크 감시 시스템의 하드웨어와 소프트웨어를 설계 제작하였고, 개발된 광 네트워크 감시 시스템이 선박이라는 특수 상황과 관련 있는 선로 연장, 매크로밴딩, 이물질이 부착된 광 커넥터에 의한 손실 등 3가지의 이벤트를 정확히 모니터링하는지를 실험을 통해 확인해 보았다. 감시 시스템의 하드웨어는 선박의 네트워크 구조에 맞는 chained branch와 dark fiber 병합 방식으로 설계 제작하였고, 3가지 이벤트에 대한 감시 시험 결과 3가지 모두 5 m 이내의 범위로 모니터링하는 것을 확인하였다.

• Journal of Information Processing Systems
• /
• 제8권2호
• /
• pp.347-358
• /
• 2012

Recently, security researches have been processed on the method to cover a broader range of hacking attacks at the low level in the perspective of hardware. This system security applies not only to individuals' computer systems but also to cloud environments. "Cloud" concerns operations on the web. Therefore it is exposed to a lot of risks and the security of its spaces where data is stored is vulnerable. Accordingly, in order to reduce threat factors to security, the TCG proposed a highly reliable platform based on a semiconductor-chip, the TPM. However, there have been no technologies up to date that enables a real-time visual monitoring of the security status of a PC that is operated based on the TPM. And the TPB has provided the function in a visual method to monitor system status and resources only for the system behavior of a single host. Therefore, this paper will propose a m-TMS (Mobile Trusted Monitoring System) that monitors the trusted state of a computing environment in which a TPM chip-based TPB is mounted and the current status of its system resources in a mobile device environment resulting from the development of network service technology. The m-TMS is provided to users so that system resources of CPU, RAM, and process, which are the monitoring objects in a computer system, may be monitored. Moreover, converting and detouring single entities like a PC or target addresses, which are attack pattern methods that pose a threat to the computer system security, are combined. The branch instruction trace function is monitored using a BiT Profiling tool through which processes attacked or those suspected of being attacked may be traced, thereby enabling users to actively respond.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.331-336
• /
• 2008

Engine builders have separately developed and applied torsional, axial and structural vibration monitoring system on most marine engines. These systems displayed their results for engine or ship operation engineers and were not regularly stored at the hardware of computer. So, tile history and trend of various engine and hull vibrations was not supported for preventive maintenance and to protect the failure of these activity or function. The integrated vibration or stress monitoring system(EVAMOS : Engine/Rotor Analysis and monitoring System) in marine diesel engine, its machineries and hull have been developed by the dynamics laboratory of Mokpo Maritime University during last 3 years. This paper introduces tile design conception and ability of commercial software EVAMOS with field data on several actual tests.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.182-187
• /
• 2017

Synchronous generators have been significantly applied in large-scale power plants and its monitoring systems are additionally established to sequentially observe states and outputs. We develop a computer based monitoring device for three-phase synchronous power generators in this paper. First, a test-bed of such generator system is created and then a interface board is constructed to transfer electric signals including the output voltage and the current from generators into a computer system via a data acquisition device. Its RMS(root-mean-square) values are continuously shown on a screen of computer systems and its time-histories graphs are additionally illustrated under a graphic user interface(GUI) mode. Lastly, we carry out real-time experiments using the generator system with the monitoring device to demonstrate its reliability and superiority by comparing results of a generic power analyzer which is well-used in measuring various power systems practically.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1291-1298
• /
• 2004

In development of monitoring and control systems, one of the most important points is to consider a redundancy so that the system can be operated normally although hardware faults are partly occurred. The purpose of this paper is to introduce a monitoring and control system with a redundancy function for I/O servers and communication networks. I/O servers composed with an active server and a standby server. Each server also has 3 communication ports, 2 ports of them were connected to field units and the other 1 port was connected to the other server. Field units have to be constructed to 2 communication ports connected I/O servers through communication lines. Also, server communication module was implemented for analyzing and handling fault elements. and was submodularized for linking easily with a monitoring and control module. An experiment with 2 servers and 2 field units was constructed to demonstrate its effectiveness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.265-266
• /
• 2006

In this paper, the ECG monitoring system on mobile platform was proposed, which is very useful to gather, storage and diagnose ECG signal. The existing ECG monitoring system is for indoor environment but this system is for outdoor environment, especially for automobile system. The developed system consisted of data logger using microprocessor and data server fur diagnosis ECG signal. We develop the data acquisition system hardware and data monitoring system for ECG signal.