• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.59-66
• /
• 2007

In korea, TIT(Transport Information Technology) based IP-TV services have been provided in Saemaeul trains and some sections of subway trains, But the software systems for the service performed in alternated fashions and suffered from many problems such as suspension, memory leaking and overflow, These problems increased playback loss time and resulted in bad reliabilities, In this paper, a software TIT monitor is designed and implemented for Monitoring module and Reset module in physically poor environments, The designed system formalized monitoring time intervals for effective monitoring, Through the real experiments, playback time is improved in 7.2% comparing to existing system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.109-112
• /
• 2004

최근들어, TFT LCD 업체들의 제품 대형화에 따라서 서서히 제품군이 중, 대형 TV를 중심으로 넓은 광시야각 기술 (FFS, IPS, VA)이 적용되고 있으며 고휘도, 고속응답, 고색순도 등 성능향상을 지속하는 가운데 LCD 백라이트로써 LCD TV에 적용하기 위해서는 무엇보다도 현재 기존 제품군보다 높은 휘도 특성의 개선이 요구되고 있다. TV 대응 LCD Panel 은 Monitor 대응 제품에 비해서 일반적으로 해상도가 낮으므로, 투과율면에서 장점은 있으나, 현재의 백라이트 구조로는 만족할만한 성능을 낼 수 없는 상황이다. 그러므로 고휘도 백라이트를 위해서 직하방식 백라이트에 대한 개발 검토가 활발히 이루어지고 있다. 따라서 본 연구에서는 백라이트에서 6500nits를 목표로 직하형 백라이트의 시뮬레이션을 실시하였으며, 램프간 거리, 리플렉터와 램프간 거리, 램프와 확산판간 거리등에 해한 최적화를 통하여 총두께에 따른 특성분석을 실시하였다. 특히, 램프의 수량에 따른 휘도 시뮬레이션을 통해서 백라이트별 기구치수를 결정할 수 있었다. 본 연구에서의 목적인 6500nits의 휘도는 프리즘시트의 적용을 통하여 달성하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.638-643
• /
• 2007

With development of high display quality of TV and Monitor, personal audio system is arising great interest. In this study, we applied a method to make a good bright zone around the user and dark zone to other region by maximizing the ratio of sound energy between the bright and dark zone. We have attempted to use a line speaker array system to localize the sound in our listening zone. It depends on the size of the zone and array parameters, for example, array size, speaker spacing, wave length of sound.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.160-164
• /
• 2003

LCD를 TV 향으로 적용하기 위해서는 몇 가지 해결해야만 하는 문제가 있으며, 이중 하나가 동화상 재생시에 발생하는 잔상현상의 해결이다. LCD는 기존의 CRT와 같은 불연속 자발광 소자가 아니라, 연속수광소자로서, 잔상현상이 치명적인 약점으로 나타난다. 기종의 Monitor 대응품에서는 실제로 Monitor를 통해서 사용자가 관찰하는 이미지 정보가 정지화상 중심으로 구성되어 있기 때문에 문제가 되지 않았으나, TV의 경우 연속적인 동화상만을 취급하고 있어, 잔상현상의 해결 없이는 TV 향 제품에 적용할 수 없다. 따라서 본 연구에서는 잔상현상을 근본적으로 없애기 위해서 LCD를 CRT와 같이 불연속적의 분절적 이미지로 구동하는 방법을 실험하였으며, VIDEO 입력 신호에 대해서 16.7msec의 1Frame을 기준으로 점등 구간과 비점등 구간을 6:4로 나누어 BL(Back Light)을 점멸하는 방법을 구현하였다. 또한 종래의 CCFL(cold Cathod Flourescent Lamp)로는 점멸 속도에 대한 대응이 불가하므로, 이를 해결하기 위해서 광원의 형광체에 대해서 잔광시간특성의 개선도 동시에 실시하였다. 실험 결과 육안 및 사진촬영에서 잔상없는 화면을 얻을 수 있었으며, 응답파형 측정 결과 CRT 측정시와 마찬가지로 분절적인 이미지의 생성이 가능한 것을 알 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.169-172
• /
• 2003

기존의 Monitor 대응 LCD 에서 TV 대응 LCD로의 개발에 있어서 특성 개선은 다각도로 진행되고 있으나, 무엇보다도 휘도 특성의 개선이 요구된다. TV 대응 LCD Panel 은 Monitor 대응 제품에 비해서 일반적으로 해상도가 낮으므로, 투과율면에서 장점은 있으나, 현재의 B/L 구조로는 만족할만한 성능을 낼 수 없는 상황이다. 고휘도 BL(Back Lignt)를 위해서 EEFL(External Electrode Fluorescent Lamp) 혹은 CCFL 의 복수 사용을 전제로 한 직하방식에 대한 개발 검토가 활발히 이루어지고 있으나, 직하방식에 의한 고휘도화는 램프수의 증가에 따른 인버터의 기구적, 전기적 사양의 증가를 필요로 하며, LCD Module전체의 두께가 증가되는 문제를 가지고 있다. 본 연구에서는 L-Shaped 램프를 적용하여 기본의 기구적인 사양 및 전기적인 사양을 유사하게 유지함과 동시에, 고휘도화를 실현하여 TV 대응 수준을 확보하였으며, lamp를 floating구동하여 램프편측 전압 500V를 사용하면서 655 nit의 휘도를 달성하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1058-1061
• /
• 2004

Recently, According to companies of TFT LCD are making large sized products more and more. In the vortex of Products with a monitor and LCD TV is applied in a technique of a high viewing angle(FFS, IPS, VA). Also, as a high luminance, high speed response time, high degree of a color purity, and so on are continuing to develop a high performance, it is necessary to improve a specific character of high luminance that apply to LCD TV as a LCD BLU. Because a LCD panel for TV usually has a lower resolution that compare to a monitor, the structure of present backlight system can't put out its power even though it has a merit in transmission. Therefore, the examination of improvement about the high luminance direct typed BLU for LCD TV that presupposes several uses of CCFL(Cold Cathode Fluorescent Lamp) or EEFL(External Electrode Fluorescent Lamp)is actively being progressed. Although it is necessary to increase the number of lamps for applying high performance by the direct type, in this case, because we can design the character of luminance for adoption of high performance. We can satisfy with a level of luminance for LCD TV. Accordingly, we analyzed a change of the number of CCFL, mechanical and optical character to produce the direct typed backlight in 32inches spec. Consequently, we achieved luminance of 6597nit,which was including polarization film, and secured the standard for LCD TV.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.8
• /
• pp.412-417
• /
• 2000

TV ghost interference can be described as passive interference by the conducting part of transmission lines. In order to survey this interference from large-sized overhead EHV (extra high voltage) transmission line, TV reception quality was measured in the vicinity of that before and after construction. Instrumentation system was composed of ghost analyzer, TV received field intensity meter, VHF/UHF antennas, TV monitor and so on. The system is installed inside the vehicle. TV field intensity and PDUR (Perceived Desired wave to Undersired wave Ratio) are measured to evaluate TV ghost by using the system and vehicle. As the results, the useful data, which can be used to evaluate the effect of TV ghost interference from transmission lines could be obtained. In this paper, it is shown that the range of TV ghost interference from transmission lines can vary according to the frequency of TV electromagnetic wave, an incidence angle to the line and the other conditiions. At present, we are making efforts to establish a PDUR guideline for transmission lines.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.44-49
• /
• 2022

The number of single-person households is increasing worldwide, and among them, the proportion of elderly single-person households is increasing. In the case of elderly single-person households, a significant portion of their leisure time is devoted to watching TV. However, if they fall asleep while watching TV without turning it off, it may be difficult to sleep well due to lights and sounds of TV, which can cause health problems such as depression and reduced immunity. Therefore, in this paper, we propose a system that automatically turns off the TV when a person watching TV falls asleep. Images are collected using the camera installed in front of the TV. Since the posture of a person watching TV varies from a sitting posture to a lying posture, the system is designed to determine whether or not to fall asleep regardless of the posture. In addition, since it becomes difficult to judge eye movements as a person moves away from the TV, a method for extending the judgmentable distance is proposed. The system model was implemented and tested using a Raspberry Pi, a monitor, an infrared sensor, and a camera. Eye movements were judged regardless of sitting or lying position, and the distance between a user and a TV was extended by about 200 cm.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.199-202
• /
• 2001

A current TV-OUT format is quite different from that of HDTY or PC monitor in encoding techniques. In other words, a conventional analog TV uses interlaced display while HDTV or PC monitor uses Non-interlaced / Progressive-scanned display. In order to encode image signals coming from devices that takes interlaced display format for progressive scanned display, a hardware logic in which scanning and interpolation algorithms are implemented is necessary. The ELA (Edge-Based Line Average) algorithm have been widely used because it provided good characteristics. In this study, the ADI(Adaptive De-interlacing Interpolation) algorithm using to improve the algorithm which shows low quality in vertical edge detections and low efficiency of horizontal edge lines. With the De-interlacing ASIC chip that converts the interlaced Digital YUV to De-interlaced Digital RGB is designed. The VHDL is used for chip design.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.7
• /
• pp.701-710
• /
• 2008

Including a TV set and a monitor, personal audio system is raising a great interest. In this study, we applied a method to make a good bright zone around the user and dark zone to other region by maximizing the ratio of sound energy between the bright and dark zone. It has been well known as acoustic contrast control. We have attempted to use a line loudspeaker array system to localize the sound in our listening zone. It depends on the size of the zone and array parameters, for example, array size, loudspeaker unit spacing, wave length of sound. We have considered these parameters as spatial variables and studied the effects. And we have found that each spatial variable has its own characteristic and shows very different effect. Genetic algorithms are introduced to find out the optimum value of spatial variables. As a result, we can improve the result of the acoustic contrast control by optimum value of spatial variables.