• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.687-690
• /
• 2008

Currently, Stream flow analysis has been accomplished by one or two dimensional equations and was applied by simple momentum equations and fixed energy conservations which contain many reach uppermost limit. In this study, FLOW-3D using CFD(Computational Fluid Dynamics) was applied to stream flow analysis which can solve three dimensional RANS(Reynolds Averaged Navier-Stokes Equation) control equation to find out physical behavior and the effect of hydraulic structures. Numerical simulation accomplished those results was compared by using turbulence models such as $k-\varepsilon$, RNG(Renomalized Group Theory) $k-\varepsilon$ and LES(Large Eddy Simulation). Numerical analysis results have been illustrated by the turbulence energy effects, velocity of flow, water level pressure and eddy flows around the side overflow type structures at Jangwall bridge in urban stream.

• Coupled systems mechanics
• /
• 제3권1호
• /
• pp.73-88
• /
• 2014

The paper deals with a model founded on the physical processes in concrete subject to high temperatures. The model is developed in the framework of continuum damage mechanics and the theory of porous media and is demonstrated on selected structures. The model comprises balance equations for heat transfer, mass transfer of water and vapour, for linear momentum and for reaction. The balance equations are completed by constitutive equations considering the special behaviour of concrete at high temperatures. Furthermore, the limitation and decline of admissible stresses is achieved by using a composed, temperature depending crack surface with a formulation for the damage evolution. Finally, the complete coupled model is applied to several structures and to different concrete in order to determine their influence on the high-temperature-behaviour.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.91-96
• /
• 2018

In this study temperature distribution and gas flow inside a planetary type reactor in which a number of satellites on a spinning susceptor were rotating were analyzed using numerical simulation. Effects of flow rates on gas flow and temperature distribution were investigated in order to obtain design parameters. The commercial computational fluid dynamics software CFD-ACE+ was used in this study. The multiple-frame-of-reference was used to solve continuity, momentum and energy conservation equations which governed the transport phenomena inside the reactor. Kinetic theory was used to describe the physical properties of gas mixture. Effects of the rotation speed of the satellites was clearly seen when the inlet flow rate was small. Thickness of the boundary layer affected by the satellites rotation became very thin as the flow rate increased. The temperature field was little affected by the incoming flow rate of precursors.

• 새물리
• /
• 제68권11호
• /
• pp.1225-1230
• /
• 2018

Schwinger pair production of electrons and positrons in a strong electric field is a prediction of nonperturbative quantum field theory, in which the out-vacuum is superposed of multi-particle states of the in-vacuum. Solving the Dirac or Klein-Gordon equation in the background field, though a linear wave equation, and finding the pair-production rate is a difficult or nontrivial job. The phase-integral method has recently been introduced to compute the pair production in space-dependent electric fields, and a complex analysis method has been employed to calculate the pair production in time-dependent electric fields. In this paper, we apply the complex analysis method to a Sauter-type electric field and other hyperbolic-type electric fields that vanish in the past and future and show that the Stokes phenomena in pair production occur when the time-dependent frequency for a given momentum has finite simple poles (polons) with pure imaginary residues.

• International Journal of Fluid Machinery and Systems
• /
• 제10권2호
• /
• pp.154-163
• /
• 2017

Performance characteristics in pump mode of pump-turbines are vital for the safe and effective operation of pumped storage power plants. However, the head characteristics are different under different guide vane openings. In this paper, 3-D steady simulations were performed under 13mm, 19mm and 25mm guide vane openings. Three groups of operating points under the three GVOs were chosen based on experimental validation to investigate the influence of guide vane setting on flow patterns upstream and downstream. The results reveal that, the guide vane setting will obviously change the flow pattern downstream, which in turn influences the flow upstream. It shows a strong effect on hydraulic loss (power dissipation) in the guide and stay vanes. It is also found that the hydraulic loss mainly comes from the flow separation and vortices. In addition, in some operating conditions, the change of guide vane opening will change the flow angle at the runner inlet and outlet, which will change the Euler momentum (power input). The joint action of Euler momentum and hydraulic loss results in the change of the head characteristics.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.39-45
• /
• 2012

In the standard CFD code, Lagrangian-Eulerian method is very popular to simulate the liquid spray penetrating into gaseous phase. Though this method can give a simple solution and low computational cost, it have been reported that the Lagrangian spray models have numerical grid dependency, resulting in serious numerical errors. Many researches have shown the grid dependency arise from two sources. The first is due to unaccurate prediction of the droplet-gas relative velocity, and the second is that the probability of binary droplet collision is dependent on the grid resolution. In order to solve the grid dependency problem, the improved spray models are implemented in the KIVA-3V code in this study. For reducing the errors in predicting the relative velocity, the momentum gain from the gaseous phase to liquid particles were resolved according to the gas-jet theory. In addition, the advanced algorithm of the droplet collision modeling which surmounts the grid dependency problem was applied. Then, in order to validate the improved spray model, the computation is compared to the experimental results. By simultaneously regarding the momentum coupling and the droplet collision modeling, successful reduction of the numerical grid dependency could be accomplished in the simulation of the high-pressure injection diesel spray.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.61-71
• /
• 1993

충돌이나 폭파시 발생하는 기계적 에너지나 화학적 에너지는 응력파의 형태로 매체를 통과하게 되며, 매체의 자유면과 절리면을 따라 반사와 굴절을 거듭하는 매우 복잡한 과정을 거치게 된다. 본 연구에서는 재료특성을 달리하는 층을 통과하는 소성응력파의 전파과정을 압력 부종속 모델인 Von-Mises 모델을 사용하여 연구하였다. 응력파의 전파과정을 연구하기 위한 지배 방정식(governing equation)으로서는 물체에 종속되어 있는 라그란지안 좌표계(lagrangian coordinate system)로 표현된 운동량과 질량보존(conservation of momentum and mass)법칙식을 사용하였으며 또한 충격전면(shock front)에 연속성을 부여하기 위해 인공점성(artificial viscosity)을 운동량 보존식에 첨가하였다. 주요 방정식을 풀기 위한 수치해석법으로는 시간과 공간 좌표계로 구성된 유한차분법(finite difference method)을 사용하였으며 소성변형률을 구하기 위한 소성이론으로서는 associated normality flow rule을 사용하였다.

• 대한토목학회논문집
• /
• 제12권2호
• /
• pp.21-33
• /
• 1992

충격하중을 받는 구조물은 초고압에서 부터 저압까지 다양한 압력을 짧은 시간에 경험하게 된다. 따라서 이들 구조물을 해석하기 위해서는 실제 물체의 재료특성을 표현할 수 있는 구성 법칙(constitutive law)이 필요하게 된다. 본 연구에서는 압력 부종속모델(pressure independent model)인 Von-Mises 모델과 압력 종속모델(pressure dependent model)인 Drucker-Prager 모델을 사용하여 충격과 폭발 현상시 발생하는 응력파의 전파과정(propagation process)을 재료특성에 따라 비교 분석하였다. 응력파의 전파과정을 연구하기 위한 지배 방정식(governing equation)으로서는 물체에 종속되어 있는 라그란지안 좌표계(lagrangian coordinate system)로 표현된 운동량과 질량보존(conservation of momentum and mass)법칙을 사용하였으며 또한 충격전면(shock front)에 연속성을 부여하기 위해 인공점성(artificial viscosity)을 운동량 보존식에 첨가하였다. 주요 방정식을 풀기 위한 수치해석법으로는 시간과 공간 좌표계로 구성된 유한차분법(finite difference method)을 사용하였으며 소성변형률을 구하기 위한 소성이론으로서는 Associated normality flow rule을 사용하였다.

• Wind and Structures
• /
• 제15권1호
• /
• pp.17-26
• /
• 2012

Modeling swirling wakes is of considerable interest to wind farm designers. The present work is an attempt to develop a computational tool to understand free, far-wake development behind a single rotating wind turbine. Besides the standard momentum and continuity equations from the boundary layer theory in two dimensions, an additional equation for the conservation of angular momentum is introduced to study axisymmetric swirl effects on wake growth. Turbulence is simulated with two options: the standard ${\kappa}-{\varepsilon}$ model and the Reynolds Stress transport model. A finite volume method is used to discretize the governing equations for mean flow and turbulence quantities. A marching algorithm of expanding grids is employed to enclose the growing far-wake and to solve the equations implicitly at every axial step. Axisymmetric far-wakes with/without swirl are studied at different Reynolds numbers and swirl numbers. Wake characteristics such as wake width, half radius, velocity profiles and pressure profiles are computed. Compared with the results obtained under similar flow conditions using the computational software, FLUENT, this far-wake model shows simplicity with acceptable accuracy, covering large wake regions in far-wake study.

• 패션비즈니스
• /
• 제17권1호
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.