• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.2
• /
• pp.74-79
• /
• 2010

The synthesis and reactivities of molybdenum carbide crystallites were examined in this study. Especially, the effect of synthesis conditions were scrutinized on the preparation of molybdenum carbide crystallites. In order to perform this purpose, various characterization techniques such as BET surface area and oxygen uptake measurements were employed for the synthesized molybdenum carbide crystallites. First of all, the molybdenum carbide crystallites were synthesized using molybdenum oxide crystallites and methane gas or methane-hydrogen mixture. The experimental results showed that BET surface areas ranged from $7.4m^2/g$ to $31m^2/g$ and oxygen uptake values varied from $8.1{\mu}mol/g$ to $24.3{\mu}mol/g$. The Mo compounds were found to be active for ammonia decomposition reaction. Even though there are some molybdenum carbide crystallites that were exceeded by Pt/$Al_2O_3$ crystallite, the steady state reactivities for other molybdenum carbide crystallites were comparable to or even higher than that determined for the Pt/$Al_2O_3$ crystallite. These results implied that molybdenum carbide crystallites could be one of the promising crystallites that might be substitutes for Pt-like noble metal crystallites in the petroleum processes.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.183-187
• /
• 2020

The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, have not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, In this paper, especially, research on the convergency design for total inspection machine is treated. is treated.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1443-1444
• /
• 2012

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.197-201
• /
• 2020

The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, did not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, research on design and manufacturing of JIG and Fixture for molybdenum pin manufacturing and inspection is treated.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.372-381
• /
• 1985

Oxo molybdenum (V) complexes of substituted 8-quinolinols were synthesized and characterized by means of the investigation of elemental analysis, infrared spectra, electron spectra, electric conductivity and mass spectrometry compared with oxo molybdenum (VI) complexes. Oxo molybdenum(V) complexes were nonelectrolyte and one strong band of stretching mode of molybdenum and terminal oxygen appeared approximately $940cm^{-1}$. Oxo molybdenum(VI) complexes gave two peaks corresponding molybdenum containing ions, a molecular ion (I) of a 2 : 1 (ligand : metal) chelate and a fragment ion (II) of a 1:1 chelate due to the loss of ligand radical from ion (I). Molybdenum(V) complexes were observed the fragment ion(II) of a 1 : 1 chelate partly. The electronic spectra corresponding to d-d transition and charge transfer transition were observed and interpreted.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.116-122
• /
• 1999

The purpose of this study is to develop new process named "hydrogen peroxide dissolution method". This process used hydrogen peroxide, which is harmless to human body and oxidize molybdenum wire selectively.The advantages of hydrogen peroxide dissolution method were no discharge of noxious matter when dissolution of molybdenum wire which used as the center supporter, reactions occur in room temperature and easy to recover dissolved molybdenum. This study was aimed at gathering the basic data of molybdenum wire dissolution-recovery process and proposes the reaction condition of molybdenum wire dissolution-recovery process and the factors influencing those reactions. The results were as follows:1. In the dissolution of molybdenum wire, the early condition of reaction was $15^{\circ}C$, and the temperature condition of state was $32^{\circ}C$. 2. 1) In the GSL-60W type, P.W.(Piece weight) was 11.89mg, C.R. was $65.6\Omega$. 2) In the FL-20W type, P.W. was 11.60mg, C.R. was $4.6\Omega$. 3. The molybdenum of process water was treated of a precipitation after dry and after stagnation in the one day, the molybdenum of upper water was treated of precipitation after dry and after congelation.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.2
• /
• pp.1-7
• /
• 1999

In the tungsten industry as light source material, tungsten filament which used as light source material ould form after molybdenum wire which used as the center supporter for coil shape tungsten wire was removed. The purpose of this study is to develop new process named "hydrogen peroxide dissolution method". This process uses hydrogen peroxide, which is harmless to human body and oxidize molybdenum wire selectively. The results were as follows:1. The dissolution of molybdenum wire was proportion to a solution and contact surface of molybdenum wire. 2. The optimum $H_2O_2/H_2O$ were 1:0.5 ~ 1:1.75. 3. The time of dissolution was 65~70 minutes, and the PCS of sample were 20,800 PCS(1,820g). 4. Total cost($H_2O_2$, catalyst) was ￦19,088.

• Korean Journal of Metals and Materials
• /
• v.50 no.6
• /
• pp.445-448
• /
• 2012

We studied the effect of temperature and reaction time by investigating the various temperatures and reaction times in the reduction of molybdenum oxide ($MoO_3$) to molybdenum (Mo) powder in hydrogen gas. We also studied the effect of the reaction of reduction according to the various hydrogen gas flow rates. We surveyed the reduction from molybdenum oxide to molybdenum powder in hydrogen gas and checked two temperature ranges, one from $400^{\circ}C$ to $600^{\circ}C$ and the other from $700^{\circ}C$ to $900^{\circ}C$. We found that the reaction ratio of molybdenum oxide increased with an increasing temperature and also increased with an increasing reaction time, but hydrogen gas did not influence the reduction ratio of molybdenum oxide. We examined molybdenum powders fabricated by ball milling for two hours, using with X-ray diffraction (XRD) and a scanning electron microscopy (SEM).

• Journal of environmental and Sanitary engineering
• /
• v.18 no.2
• /
• pp.60-66
• /
• 2003

This study was carried out to elucidate the preventive mechanism of molybdenum on lead-induced neuropathy, An animal model of lead neuropathy was induced by feeding diet containing lead to Sprague-Dawley rat for three weeks. Four weeks aged Sprague-Dawley rats were divided into four groups : normal control group, 10ppm-lead treated group, 1mg/kg-molybdenum treated group, 10ppm-lead and 1mg/kg-molybdenum treated group. The parameters on neuropathy were examined by measuring concentration of myo-inositol and myo-inosito uptake in sciatic nerve. In the lead-treated rats, myo-inositol concentration and myo-inositol uptake rate were reduced by from 54% to 33% respectively. This deficit results from that myo-inositol uptake system which is carrier mediated and sodium-potassium dependent was inhibited by the lead treatment. However, the molybdenum administration significantly eliminated the impairment and maintained myo-inositol concentration to about 82% of normal level. These results suggest that lead-induced neurotoxicity was significantly reduced by administration of molybdenum and the mechanism might be partly normalization of myo-inositol uptake system in sciatic nerve.

• The Research Journal of the Costume Culture
• /
• v.30 no.1
• /
• pp.88-101
• /
• 2022

Molybdenum is used in electrical contacts, industrial motors, and transportation materials due to its remarkable ability to resist heat and corrosion. It is also used to flame coat other metals. This study investigated, the thermal characteristics of the molybdenum sputtered material, such as electrical conductivity, and stealth effects on infrared thermal imaging cameras. To this end, molybdenum sputtered samples were prepared by varying the density of the base sample and the type of base materials used. Thereafter, the produced samples were evaluated for their surface state, electrical conductivity, electromagnetic field characteristics, thermal characteristics, stealth effect on infrared thermal imaging cameras, and moisture characteristics. As a result of infrared thermal imaging, the molybdenum layer was directed towards the outside air, and when the sample was a film, it demonstrated a greater stealth effect than the fabric. When the molybdenum layer was directed to the outside air, all of the molybdenum sputtering-treated samples exhibited a lower surface temperature than the "untreated sample." In addition, as a result of confirming electrical properties following the molybdenum sputtering treatment, it was determined that the film exhibited better electrical conductivity than the fabric. All samples that were subjected to molybdenum sputtering exhibited significantly reduced electromagnetic and IR transmission. As a result, the stealth effect on infrared thermal imaging cameras is considered to be a better way of interpreting heat transfer than infrared transmission. These results are expected to have future applications in high-performance smartwear, military uniforms, and medical wear.