• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.647-649
• /
• 2000

• Korean Journal of Materials Research
• /
• v.25 no.10
• /
• pp.547-551
• /
• 2015

The present study prepared molybdenum trioxide ($MoO_3$), the most important intermediate of molybdenum metal, by using a fluidized bed reactor for the thermal decomposition of ammonium molybdate (AM) in the presence of an air flow. During the process of fluidizing the sample inside the reactor, the reaction time and temperature were optimized with a close analysis of the X-ray diffraction (XRD) data and with thermogravimetric analysis (TGA). In particular, the temperature level, at which the AM decomposition is completed, is very important as a primary operating parameter. The analysis of the XRD and TGA data showed that the AM decomposition is almost completed at ${\sim}350^{\circ}C$ with a reaction time of 30 min. A shorter reaction time of 10 min. required a higher reaction temperature of ${\sim}500^{\circ}C$ with the same air flow rate to complete the AM decomposition. A sharp rise in the decomposition efficiency at a temperature ranging between 320 and $350^{\circ}C$ indicated a threshold for the AM decomposition. The operating conditions determined in this study can be used for future scale-ups of the process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.114-119
• /
• 1998

Intensity and stability of the blue color of phospho-molybdate complex in P analysis are known to be influenced by the matrix, reducing regent and acidity of the extractants. Objective of this research was to compare the efficiency of the color-developing reagents for P concentrations in distilled water and extracts of Lancaster, Mehlich II, and Mehlich III methods. Efficiencies on which to base this study were evaluated by the optimum ranges of P, reproducibility of calibration curve and stability of the developed color. Color-developing reagents employed were ammonium molybdate-1,2,4- aminonaphtholsulfonic acid (ANS), ammonium molybdate-ascorbic acid-bismuth subcarbonate (AB), and ammonium molybdate-ascorbic acid-antimony potassium tartarate (AA). The ANS revealed the lowest sensitivity but the widest ranges for P concentrations in color development. On the other hand, the AA bore the narrowest color-developing ranges and its sensitivity was similar to AB. However, at P concentrations lower than $0.5mg\;L^{-1}$, AA was more sensitive than AB. Based on the data on the ranges of calibration curve, stability of color and reproducibility of analytical data. AA reagent was considered to be suitable for the determination of P in distilled water and AB reagent was practically recommendable for soil P analysis in extracts by Lancaster, Mehlich II, and Mehlich III procedures.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.53-63
• /
• 1992

M/BM -series catalysts, $MoO_3$ supported on ${\alpha}-Bi_2Mo_3O_{12}$ were also prepared by impregnation method. BM/M-series catalysts, ${\alpha}-Bi_2Mo_3O_{12}$ supported on $MoO_3$ were also prepared by coprecipitation. Structure and catalytic properties of the two phase catalysts were studied by means of using nitrogen adsorption, X-ray diffraction, and scanning electron microscopy. The reaction test for the selective oxidation of propylene to acrolein over Bi-molybdate catalysts was studied using a fixed-bed reactor system. In M/BM-series catalysts, $MoO_3$ was dispersed on ${\alpha}-Bi_2Mo_3O_{12}$, and the crystal structure of ${\alpha}-Bi_2Mo_3O_{12}$ remains unchanged by the presence of excess $MoO_3$. However the surface morphology and bulk structure of BM/M-series catalysts were altered probably because the precipitated $Bi(OH)_3$ reacted with $MoO_3$ during the calcination to form ${\alpha}-Bi_2Mo_3O_{12}$ phase. The results of propylene oxidation on both series catalysts showed that the reaction took place over the surface of ${\alpha}-Bi_2Mo_3O_{12}$ particle and the role of excess $MoO_3$ was to supply oxygen to ${\alpha}-Bi_2Mo_3O_{12}$. These increasing effects on activity were also observed in the mechanical mixtures of ${\alpha}-Bi_2Mo_3O_{12}$ and $MoO_3$.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.364-369
• /
• 2017

Double molybdate $NaGd_{1-x}(MoO_4)_2:Ho^{3+}/Yb^{3+}$ phosphors with proper doping concentrations of $Ho^{3+}$ and $Yb^{3+}$ ($x=Ho^{3+}+Yb^{3+}$, $Ho^{3+}=0$ and 0.05, and $Yb^{3+}=0$, 0.35, 0.40, 0.45, and 0.50) were successfully synthesized using the microwave sol-gel method. Well-crystallized particles formed after heat-treatment at $800^{\circ}C$ for 16 h showed fine and homogeneous morphologies with particle sizes of $1{\sim}3{\mu}m$. The spectroscopic properties were examined using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the upconversion doped samples exhibited strong yellow emissions, from the combination of strong emission bands at 545 nm and 655 nm in the green and red spectral regions, respectively. The strong 545 nm emission band in the green region corresponded to the $^5S_2/^5F_4{\rightarrow}^5I_8$ transition in the $Ho^{3+}$ ions, while the strong 655 nm band in the red region appeared because of the $^5F_5{\rightarrow}^5I_8$ transition in the $Ho^{3+}$ ions. The pump power dependence and the Commission Internationale de L'Eclairage chromaticity of the upconversion emission intensity were evaluated in detail.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.36-44
• /
• 2003

The present work relates to the recovery of dissolved Mo from spent mandrel dissolving acid solution by injecting ammonia gas. In order to optimize the process parameters for high yield and high purity of recovered Mo products, a bench scale and a pilot scale experiments were carried out. As a result, more than 99.5% of Mo in spent acid was recovered in the form of ammonium molybdate(4MoO$_3$.$2NH_3$.$H_2$O). The purity of Mo products recovered was higher than 99.5%. In addition, the mother liquor, residual solution after precipitation and filtration of ammonium molybdate solid particles, could be utilized as fertilizers.

• Korean Journal of Materials Research
• /
• v.16 no.6
• /
• pp.386-393
• /
• 2006

Increasing environmental concerns require to solve the problem produced due to the use of heavy metals in coating formulations. Therefore, it is necessary to develop new coating strategy employing inherently conducting polymers such as polyaniline. Polyaniline is a conductive polymer that is synthesized by oxidation polymerization, and the electrochemical and chemical polymerization are possible for the oxidation of aniline. Electrochemical oxidation polymerization produces a fine surface and although voltage control is more convenient, it require electrolytic cells, and elaborate thin film can be acquired with the polymerization. Polyaniline films were electro-polymerized on cold rolled sheets using the galvanostat mode in the oxalic acidaniline-sodium molybdate electrolyte. The structure and properties of polyaniline film were studied using Potentiostat/Galvanostat 263A, FE-SEM,, AFM, SST, Colorimetry. A high corrosion resistance of polyaniline film was observed with an increase of corrosion potential by $500{\sim}600$ mV for the substrate covered with polyaniline.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.323-328
• /
• 2002

The model of the shortest chemical bonds is applied for the classification of acentric simple and binary Mo(VI) and W(VI) oxides. It is shown that on the plane of the shortest chemical bonds the compounds are located into the rosette of three intersected ellipses. The correlation between the optical nonlinearity and combination of the bond lengths is discussed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.67.1-67
• /
• 1998

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.54-61
• /
• 1984

The species and equilibrium of molybdate and tungstate have been investigated from the elution behaviors of those in various concentrations of nitric acid and the UV spectra obtained at the various Z values. In higher concentrations than 0.05M nitric acid, the nitarte complex species of $MoO_2(NO_3)_2$ seems to form from the $MoO_2^{2+}$ ions formed by the following equation: $Mo_8O_{26}^{4-} + 20H^+$ ${\rightleftharpoons}$ $8MoO_2^{2+}$ + $10H_2O$. In the case of tungstate, the elution behaviors of tungstate in nitric acid medium are similar to those of perchloric acid, so we think the equilibrium of tungstate existed in perchloric acid could be also existed in nitric acid. These elution behaviors of tungstate are compared with the UV spectra obtained at the various Z values.