• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.172-173
• /
• 2005

The electronic state of ZnO doped with Y was calculated using the density functional theory. In this study, the program used for the calculation on theoretical structures of ZnO and doped ZnO was Vienna Ab-initio Simulation Package (VASP), which is a sort of pseudo potential method. The detail of electronic structure was obtained by the descrite variational $X\alpha$ (DV-$X\alpha$) method, which is a sort of molecular orbital full potential method. The optimized crystal structures obtained by calculations were compared to the measured structure. The density of state and energy levels of dopant elements was shown and discussed in association with optical properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.379-379
• /
• 2010

Recent technical advances in OLEDs (organic light emitting devices) requires more and more the improvement in low operation voltage, long lifetime, and high luminance efficiency. Inverted top emission OLEDs (ITOLED) appeared to overcome these problems. This evolved to operate better luminance efficiency from conventional OLEDs. First, it has large open area so to be brighter than conventional OLEDs. Also easy integration is possible with Si-based driving circuits for active matrix OLED. But, a proper buffer layer for carrier injection is needed in order to get a good performance. The buffer layer protects underlying organic materials against destructive particles during the electrode deposition and improves their charge transport efficiency by reducing the charge injection barrier. Hexaazatriphenylene-hexacarbonitrile (HAT-CN), a discoid organic molecule, has been used successfully in tandem OLEDs due to its high workfunction more than 6.1 eV. And it has the lowest unoccupied molecular orbital (LUMO) level near to Fermi level. So it plays like a strong electron acceptor. In this experiment, we measured energy level alignment and hole current density on inverted OLED structures for hole injection. The normal film structure of Al/NPB/ITO showed bad characteristics while the HAT-CN insertion between Al and NPB greatly improved hole current density. The behavior can be explained by charge generation at the HAT-CN/NPB interface and gap state formation at Al/HAT-CN interface, respectively. This result indicates that a proper organic buffer layer can be successfully utilized to enhance hole injection efficiency even with low work function Al anode.

• 대한화학회지
• /
• 제36권4호
• /
• pp.477-484
• /
• 1992

Y123 초전도체 및 Y124 초전도체 결정 구조에서 사슬과 층에 존재하는 구리의 화학결합 및 전자 성질을 반경험적 분자 궤도론인 ASED-MO로 계산하여 VEP(valence electron population), DOS(density of state) 및 COOP(crystal orbital overlap population)로써 고찰하였다. 또한 구리 원자의 환경 효과를 알아보기 위하여 하전 덩어리 모델에 수소의 점전하가 있는 경우와 점전하가 없는 경우를 도입하였다. ASED-MO 계산 결과로 부터, Y123 초전도체 및 Y124 초전도체의 사슬에 존재하는 구리 원자는 전자 받게 역할을 하며, 층에 존재하는 구리 원자는 전자 주게 역할을 한다는 것을 알 수 있었다. 점전하가 없는 Y123 초전도체 및 Y124 초전도체의 사슬에 존재하는 구리의 산화 상태는 층에 존재하는 구리의 산화 상태보다도 더 크다. Y123 초전도체의 층에 존재하는 구리 원자의 산화 상태는 Y124 초전도체의 층에 존재하는 구리 원자의 산화 상태보다도 더 크다. 그리고 Y123 초전도체의 사슬과 층에 존재하는 구리 원자는 주위 환경에 크게 영향을 받지 않으며, Y124 초전도체의 사슬과 층에 존재하는 구리 원자의 경우 Y123 초전도체와 다르게 주위 환경에 크게 영향을 받는다는 것을 알 수 있었다. 또한 Cu1-O4, Cu2-O4의 전자분포와 결합성은 Y123 초전도체와 Y124 초전도체가 다르게 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3285-3292
• /
• 2012

The interaction of thiazole drug with (6,0) zigzag single-walled boron nitride nanotube of finite length in gas and solvent phases was studied by means of density functional theory (DFT) calculations. In both phases, the binding energy is negative and presenting characterizes an exothermic process. Also, the binding energy in solvent phase is more than that the gas phase. Binding energy corresponding to adsorption of thiazole on the BNNT model in the gas and solvent phases was calculated to be -0.34 and -0.56 eV, and about 0.04 and 0.06 electrons is transferred from the thiazole to the nanotube in the phases. The significantly changes in binding energies and energy gap values by the thiazole adsorption, shows the high sensitivity of the electronic properties of BNNT towards the adsorption of the thiazole molecule. Frontier molecular orbital theory (FMO) and structural analyses show that the low energy level of LUMO, electron density, and length of the surrounding bonds of adsorbing atoms help to the thiazole adsorption on the nanotube. Decrease in global hardness, energy gap and ionization potential is due to the adsorption of the thiazole, and consequently, in the both phases, stability of the thiazole-attached (6,0) BNNT model is decreased and its reactivity increased. Presence of polar solvent increases the electron donor of the thiazole and the electrophilicity of the complex. This study may provide new insight to the development of functionalized boron nitride nanotubes as drug delivery systems for virtual applications.

• 대한화학회지
• /
• 제37권4호
• /
• pp.431-441
• /
• 1993

Acrylic acid, methacrylic acid, crotonic acid(A 그룹), 또는 3-butenoic acid 4-pentenoic acid(B group) 등이 배위된 bis(trimethylphosphine) 팔라듐(O) 착물에서 ${\pi}$-및 metallacycle의 안정한 구조와 반응성을 분자역학법과 확장분자궤도함수법으로 조사하였다. 올레핀의 HOMO 및 LUMO 계수가 큰 A 그룹 리간드는 ${\pi}$-착물이 안정화되고, LUMO 계수가 상대적으로 적은 B 그룹 리간드는 금속함유고리화합물이 안정하였으며, 특히, 3-butenoic acid에서는 6원고리 화합물보다 메틸기를 갖는 5원고리 화합물이 더 안정함을 알 수 있었다.

• 대한화학회지
• /
• 제53권3호
• /
• pp.266-271
• /
• 2009

고체 화합물 La7Os4C9 속에 있는 [Os4C9]21‑ 사슬의 전자구조와 화학결합을 extended Hückel 계산 결과에 의해서 논의하였다. 탄소 원자는 물론 (C2)2‑ 분자의 결합 특성은 비교적 큰 Os-C 상호작용을 나 타내었고 특히 (C2)2‑ 분자의 결합길이 증가는 Fermi level 바로 아래에 Os-C2(1 πg) 결합 밴드의 존재로 인 해서 반결합 1πg 오비탈에 부분적인 전자점유가 일어나기 때문인 것으로 해석된다.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1875-1880
• /
• 2010

A dicycle pyrazoline derivative, 1-phenyl-5-(p-fluorophenyl)-3,4-($\alpha$-p-fluoro-tolylenecyclohexano) pyrazoline, was synthesized and characterized by elemental analysis, IR, UV-vis, fluorescence spectra and X-ray single crystal diffraction. Density function theory (DFT) calculations were performed by using B3LYP method with 6-$311G^{**}$ basis set. The optimized geometry can well simulate the molecular structure. Vibrational frequencies were predicted, assigned and compared with the experimental values, which suggest that B3LYP/6-$311G^{**}$ method can well predict the IR spectra. Both the experimental electronic absorption spectra and the predicted ones by B3LYP/6-$311G^{**}$ method reveal three electron-transition bands, with the theoretical ones having some red shifts compared with the experimental data. Natural bond orbital analyses indicate that the absorption bands are mainly derived from the contribution of n $\rightarrow\pi^*$ and $\pi\rightarrow\pi^*$ transitions. Fluorescence spectra determination shows that the title compound can emit blue-light at about 478 nm. On the basis of vibrational analysis, the thermodynamic properties of title compound at different temperature have been calculated, revealing the correlations between $C^0_{p,m}$, $S^0_m$, $H^0_m$ and temperature.

• 대한화학회지
• /
• 제24권1호
• /
• pp.15-19
• /
• 1980

Glycinato 및 glycine ester 리간드의 전자구조와 반응성을 조사하기 위하여 CNDO/2와 EHT 분자궤도함수법을 적용하였다. 두자리 배위자로 작용하는 glycinato 리간드의 구조는 탄소에서 질소쪽으로 가는 결합이 ${\Delta}O_4C_3C_2$ 와 ${\Delta}O_3C_2N_1$ 평면에서 $105^{\circ}9'$의 dihedral angle을 가지는 Gly-I 구조가 Gly Ⅱ 구조보다 안정함을 알았으며, glycine ester 리간드에 대한 에너지 성분 분석 결과로서 alkyl가 치환에 따른 전자효과를 볼 수 있었다. CNDO/2 MO 계산으로 얻은 전자밀도 $q_N$값으로부터 리간드의 안정도 순위는 Glycinato>Gly-Et-Ester>Gly-i-Pr-ester>Gly-Me-ester 순으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.289-296
• /
• 2014

Here, we have studied the effect of water added electrolyte on the photovoltaic performance of dye-sensitized solar cells (DSSCs). It was found that open-circuit voltage ($V_{oc}$) increased and short-circuit current density ($j_{sc}$) decreased with the increase of the amount of added water in the electrolyte of the DSSCs. Electrochemical impedance spectroscopy (EIS) study showed that the electrolyte with added water shifted the dye loaded $TiO_2$ conduction band upward that eventually increased $V_{oc}$ of the cells. On the other hand, the upward shift of $TiO_2$ conduction band decreased the driving force for the electron injection from the lowest unoccupied molecular orbital (LUMO) of the dye molecules to the conduction band of $TiO_2$ that resulted in decreased $j_{sc}$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.645-645
• /
• 2013

Applying a first-principles computational approach combining density-functional theory and matrix Green's function calculations, we have studied the effects [2+2] cycloaddition olligormerization of fullerene $C_{60}$ chains on their junction charge transport properties. Analyzing first the microscopic mechanism of the switching realized in recent scanning tunneling microscope (STM) experiments, we found that, in agreement with experimental conclusions, the device characteristics are not significantly affected by the changes in electronic structure of $C_{60}$ chains. It is further predicted that the switching characteristics will sensitively depend on the STM tip metal species and the associated energy level bending direction in the $C_{60}-STM$ tip vacuum gap. Considering infinite $C_{60}$ chains, however, we confirm that unbound $C_{60}$ chains with strong orbital hybridizations and band formation should in principle induce a much higher conductance state. We demonstrate that a nanoelectromechanical approach in which the $C_{60}-STM$ tip distance is maintained at short distances can achieve a metal-independent and drastically improved switching performance based on the intrinsically better electronic connectivity in the bound $C_{60}$ chains.