• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.1-13
• /
• 2007

The rheological properties of an ink relate to its performance on the press and to the printing quality. So it is necessary to analyze the relationship between printability and the rheological properties of ink. Transfer rate of ink is one of the important factor deciding print quality. And it is concerned with rheological properties of ink. Thus, in this study, according to the molecular weight of rosin modified phenolic resin the rheological properties of ink were measured by rotational rheometer and then transfer equation of ink, density and gloss were measured in order to examine the printability of ink.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.53-56
• /
• 2003

The properties of YBCO thick film coated on Ag wire with YBCO powder is deeply affected by cracking on its surface which was deposited in organic solution by electrophoretic method. YBCO superconducting thick films were prepared on Ag wire$({\Psi}0.8mm)$ by electrophoresis in acetone with added PEG (Poly-Ethylene Glycol, 3% in Acetone), 1ml for being crack-free. The surface properties of YBCO superconducting wire was evidently improved with adding PEG. Added PEG which molecular weight is 600, 1000, 3400 was affected with variation of deposition voltages to the surface properties of samples. As a result, with adding PEG (its molecular weight is 3400), YBCO superconducting wire was better on its surface properties.

• Elastomers and Composites
• /
• 제34권2호
• /
• pp.121-127
• /
• 1999

스티렌-부타디엔 고무(styrene-butadiene rubber :SBR)의 가공성과 기계적 물성을 조절하는 방안의 일환으로, 고분자량 SBR(high molecular weight SBR : HM-SBR)과 저분자량 SBR (low molecular weight SBR : LM-SBR)의 혼합물의 특성을 조사하였다. HM-SBR/LM-SBR의 LM-SBR 함량이 증가함에 따라 경화전 혼합물의 Mooney 점도와 경화에 따른 토오크 증가치는 감소하고 가황 후 혼합물들의 Shore A 경도와 반발탄성율은 감소를 보였다. 또한 LM-SBR 함량의 증가에 따라 혼합물들의 가황 후 유리전이온도는 일정하지만 고무상태에서 tan ${\delta}$는 증가를 보였다. LM-SBR 함량에 따른 가황 전 혼합물들의 Mooney 점도 감소는 LM-SBR의 가소화 효과와 분자량 분포 증가에 기인하는 것으로 해석하였다. 가황 HM-SBR/LM-SBR 혼합물의 기계적 물성 변화는 고무 혼합물의 가교밀도 감소에 기인하는 것으로 판단되었다.

• Composites Research
• /
• 제32권3호
• /
• pp.163-169
• /
• 2019

본 연구에서 우리는 자유 라디칼 중합에 기반한 열가소성 고분자의 동적 분자동역학 중합 알고리즘을 이용하여 95%의 변환률을 갖는 PMMA의 고분자 모델을 구성하였다. 본 알고리즘에서는 계산 수행에 필요한 시간을 줄이기 위해 PCFF 포텐셜 함수의 결합 항들 TraPPE-UA 포텐셜 함수의 비결합 항을 조합한 united-atom level의 coarse-grained 포텐셜 함수를 도입하였다. 자유 라디칼 중합 시뮬레이션을 통해 생성된 각 사슬을 분석하여 고분자의 분자량 분포와 평균 분자량을 계산하였고, 고분자의 분자량은 초기 상태에 존재하는 개시제 라디칼의 수를 이용하여 조절하였으며, 유리전이온도, 기계적 물성에 미치는 분자량의 효과에 대해 연구되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.9-12
• /
• 2005

본 연구에서는 셀룰로오즈 유도체로 사용되어지는 cellulose acetate butyate (CAB), cellulose acetate propionate (CAP), nitrocellilose (GC-519)의 분자량에 의한 유변학적 특성의 영향을 분석하기 위하여 각각의 셀룰로오즈 유도체를 Gel Permeartion Chromatography (GPC)를 이용하여 각각의 분자량을 측정하였다. GPC를 이용하여 셀룰로오즈 유도체의 중량평균분자량 (Mw)과 수평균분자량 (Mn)을 측정하였다. 각각의 셀룰로오즈 유도체에 가소제인 di-n-propyl adipate (DNPA)를 첨가한 뒤 아세톤에 녹여 레오미터를 이용하여 $0^{\circ}C$에서 가소제가 포함된 셀룰로오즈 유도체의 유변학적 특성을 측정하였다.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.112-118
• /
• 2004

With the goal of enhancing the creep resistance of ultra-high molecular weight polyethylene (UHMWPE), we performed gamma irradiation and post-irradiation annealing at a low temperature, and investigated the crystalline structures and mechanical properties of the samples. Electron spin resonance spectra reveal that most of the residual radicals are stabilized by annealing at 100$^{\circ}C$ for 72 h under vacuum. Both the melting temperature and crystallinity increase after increasing the dose and by post-irradiation annealing. When irradiated with the same dose, the quenched sample having a higher amorphous fraction exhibits a lower swell ratio than does the slow-cooled sample. The measured tensile properties correlate well to the crystalline structure of the irradiated and annealed samples. For enhancing creep resistance, high crystallinity appears to be more critical than a high degree of crosslinking.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.13-18
• /
• 2005

PLA/LPCL/HPCL blend fibers composed of poly (lactic acid) (PLA), low molecular weight poly ($\varepsilon$-caprolactone) (LPCL), and high molecular weight poly ($\varepsilon$-caprolactone) (HPCL) were prepared by melt blending and spinning for bioab­sorbable filament sutures. The effects of blending time and blend composition on the X-ray diffraction patterns and tensile properties of PLA/LPCL/HPCL blend fibers were characterized by WAXD and UTM. In addition, the effect of in vitro degra­dation on the weight loss and tensile properties of the blend fibers hydrolyzed during immersion in a phosphate buffer solu­tion at pH 7.4 and 37$^{\circ}C$ for 1-8 weeks was investigated. The peak intensities of PLA/LPCL/HPCL blend fibers in X-ray diffraction patterns decreased with an increase of blending time and LPCL contents in the blend fibers. The weight loss of PLA/LPCL/HPCL blend fibers increased with an increase of blending time, LPCL contents, and hydrolysis time while the tensile strength and modulus of the blend fibers decreased. The tensile strength and modulus of the blend fibers were also found to be increased with an increase of HPCL contents in the blend fibers. The optimum conditions to prepare PLA/LPCL/HPCL blend fibers for bioabsorbable sutures are LPCL contents of $5 wt\%, HPCL contents of $35 wt\%, and blending time of 30 min. The strength retention of the PLA/LPCL/HPCL blend fiber prepared under optimum conditions was about $93.5\% even at hydrolysis time of 2 weeks.

• 폴리머
• /
• 제24권4호
• /
• pp.469-476
• /
• 2000

아크릴 공중합체와 점착부여제와의 상용성을 점착제의 물성에 영향을 주었다. 특히 높은 분자량과 좁은 분자량 분포를 가진 아크릴 공중합체가 혼합된 점착제는 상용계에 한해서만 점착 부여제의 함량증가에 따른 체계적인 물성 향상을 보였으며 이들 두 성분간의 상용성을 확인하는 것은 점착제의 물성에 매우 중요하다는 것을 알게 되었다.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.1-16
• /
• 2011

In these days, according to increased environmental regulations, to reduce the VOC content in paints and inks efforts are now in progress. A lot of research have progressed hydrocarbon solvents substitute with vegetable oil or ester in the printing ink but it is restricted to use vegetable oil in the inks because of high molecular weight and viscosity. Oil ester currently developed for printing inks still have some drawbacks, but overall the printability and print quality when using ester than hydrocarbon solvents are showing good results. Thus, in this paper, I studied about the properties variation of the varnish and inks according to vegetable ester, after I reacted vegetable ester using the vegetable fatty acid and ethyl alcohol, butyl alcohol. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.

• 한국식품영양과학회지
• /
• 제26권6호
• /
• pp.1102-1108
• /
• 1997

Proteins and polysaccharides confer distinct functional properties in food systems. This research was attempted to improve emulsion properties of casein by protein-polysaccharide conjugation, in which alginates with various molecular weights were employed as polysaccharide sources. Casein-alginate mixtures were conjugated by the amino-carbonyl or Maillard reaction at 6$0^{\circ}C$ and 79% relative humidity. The resulting casein-alginate conjugates were tested for their emulsion activity and emulsion stabilizing properties. In general, the emulsion stability of casein-alginate mixture greatly increased due to the amino-carbonyl reaction between casein and alginates, whose magnitude depended on the molecular weight of alginate, weight ratio of casein to alginate and incubation time. It was also found that thermal stability and pH stability were markedly improved by the casein-alginate conjugation.