• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.263-270
• /
• 2019

Palm oil mill effluent (POME) is the largest pollutant discharged into the rivers of Malaysia. Thus UF membrane study was conducted to investigate the effect of pressure and stirring speed on performance of POME treatment and fouling of membrane. Two types of membrane polyethersulfone (PES) and regenerated cellulose (RC) with molecular weight cut-off (MWCO) 5 and 10 kDa were used in this study. Results showed that, as pressure increased, fouling increased however permeate quality improved, the best pressure was 1.0 bar, where the fouling was not too high and produce good permeate quality. As stirring speed increased, fouling reduced and permeate quality improved, however, when stirring speed increased from 600 rpm to 800 rpm, there was no significant improvement on the permeate quality. Therefore, the best condition was at 1.0 bar and 600 rpm. PES membrane with MWCO 5 kDa showed the best permeate quality, even fouling slightly higher than RC membrane. The permeate quality obtained were analyzed in term of dissolved solid, turbidity, suspended solid, biological oxygen demand ($BOD_5$) and chemical oxygen demand (COD) were 538 mg/L, 1.02 NTU, < 25 mg/L, 27.7 mg/L and 62.8 mg/L, respectively with dominant type of fouling is cake resistance. Thus, it can be concluded water reuse standard was successfully achieved in terms of $BOD_5$ and suspended solid.

• Journal of Animal Science and Technology
• /
• 제63권5호
• /
• pp.1182-1193
• /
• 2021

The aims of this study were to develop a milk protein-based probiotic delivery system using a modified rennet-induced gelation method and to determine how the skim milk powder concentration level and pH, which can affect the rennet-induced intra- and inter-molecular association of milk proteins, affect the physicochemical properties of the probiotic delivery systems, such as the particle size, size distribution, encapsulation efficiency, and viability of probiotics in simulated gastrointestinal tract. To prepare a milk protein-based delivery system, skim milk powder was used as a source of milk proteins with various concentration levels from 3 to 10% (w/w) and rennet was added to skim milk solutions followed by adjustment of pH from 5.4 or 6.2. Lactobacillus rhamnosus GG was used as a probiotic culture. In confocal laser scanning microscopic images, globular particles with a size ranging from 10 ㎛ to 20 ㎛ were observed, indicating that milk protein-based probiotic delivery systems were successfully created. When the skim milk powder concentration was increased from 3 to 10% (w/w), the size of the delivery system was significantly (p < 0.05) increased from 27.5 to 44.4 ㎛, while a significant (p < 0.05) increase in size from 26.3 to 34.5 ㎛ was observed as the pH was increased from 5.4 to 6.4. An increase in skim milk powder concentration level and a decrease in pH led to a significant (p < 0.05) increase in the encapsulation efficiency of probiotics. The viability of probiotics in a simulated stomach condition was increased when probiotics were encapsulated in milk protein-based delivery systems. An increase in the skim milk powder concentration and a decrease in pH resulted in an increase in the viability of probiotics in simulated stomach conditions. It was concluded that the protein content by modulating skim milk powder concentration level and pH were the key manufacturing variables affecting the physicochemical properties of milk protein-based probiotic delivery systems.

• Journal of Microbiology and Biotechnology
• /
• 제32권9호
• /
• pp.1146-1153
• /
• 2022

Many probiotic species have been used as a fermentation starter for manufacturing functional food materials. We have isolated Bifidobacterium animalis subsp. lactis LDTM 8102 from the feces of infants as a novel strain for fermentation. While Glycine max has been known to display various bioactivities including anti-oxidant, anti-skin aging, and anti-cancer effects, the immune-modulatory effect of Glycine max has not been reported. In the current study, we have discovered that the extract of Glycine max fermented with B. animalis subsp. lactis LDTM 8102 (GFB 8102), could exert immuno-modulatory properties. GFB 8102 treatment increased the production of immune-stimulatory cytokines in RAW264.7 macrophages without any noticeable cytotoxicity. Analysis of the molecular mechanism revealed that GFB 8102 could upregulate MAPK2K and MAPK signaling pathways including ERK, p38, and JNK. GFB 8102 also increased the proliferation rate of splenocytes isolated from mice. In an animal study, administration of GFB 8102 partially recovered cyclophosphamide-mediated reduction in thymus and spleen weight. Moreover, splenocytes from the GFB 8102-treated group exhibited increased TNF-α, IL-6, and IL-1β production. Based on these findings, GFB 8102 could be a promising functional food material for enhancing immune function.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.148-154
• /
• 2022

As the 4th industrial age approaches, the demand for semiconductors is increasing enough to be used in all electronic devices. At the same time, semiconductor technology is also developing day by day, leading to ultraprecision and low power consumption. Semiconductors that keep getting smaller generate heat because the energy density increases, and the generated heat changes the shape of the semiconductor package, so it is important to manage. The temperature change is not only self-heating of the semiconductor package, but also heat generated by external damage. If the package is deformed, it is necessary to manage it because functional problems and performance degradation such as damage occur. The package burn in test in the post-process of semiconductor production is a process that tests the durability and function of the package in a high-temperature environment, and heat dissipation performance can be evaluated. In this paper, we intend to review a new material formulation that can improve the performance of the adapter, which is one of the parts of the test socket used in the burn-in test. It was confirmed what characteristics the basic base showed when polyamide, a high-molecular material, and alumina, which had high thermal conductivity, were mixed for each magnification. In this study, functional evaluation was also carried out by injecting an adapter, a part of the test socket, at the same time as the specimen was manufactured. Verification of stiffness such as tensile strength and flexural strength by mixing ratio, performance evaluation such as thermal conductivity, and manufacturing of a dummy device also confirmed warpage. As a result, it was confirmed that the thermal stability was excellent. Through this study, it is thought that it can be used as basic data for the development of materials for burn-in sockets in the future.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.608-637
• /
• 2023

The initial motivation in colloid science and engineering was driven by the fact that colloids can serve as excellent models to study atomic and molecular behavior at the mesoscale or microscale. The thermal behaviors of actual atoms and molecules are similar to those of colloids at the mesoscale or microscale, with the primary distinction being the slower dynamics of the latter. While atoms and molecules are challenging to observe directly in situ, colloidal motions can be easily monitored in situ using simple and versatile optical microscopic imaging. This foundational approach in colloid research persisted until the 1980s, and began to be extensively implemented in optics and photonics research in the 1990s. This shift in research direction was brought by an interplay of several factors. In 1987, Yablonovitch and John modernized the concept of photonic crystals (initially conceptualized by Lord Rayleigh in 1887). Around this time, mesoscale dielectric colloids, which were predominantly in a suspended state, began to be self-assembled into three-dimensional (3D) crystals. For photonic crystals operating at optical frequencies (visible to near-infrared), mesoscale crystal units are needed. At that time, no manufacturing process could achieve this, except through colloidal self-assembly. This convergence of the thirst for advances in optics and photonics and the interest in the expanding field of colloids led to a significant shift in the research paradigm of colloids. Initially limited to polymers and ceramics, colloidal elements subsequently expanded to include semiconductors, metals, and DNA after the year 2000. As a result, the application of colloids extended beyond dielectric-based photonic crystals to encompass plasmonics, metamaterials, and metasurfaces, shaping the present field of colloidal optics and photonics. In this review we aim to introduce the research trajectory of colloidal optics and photonics over the past three decades; To elucidate the utility of colloids in photonic crystals, plasmonics, and metamaterials; And to present the challenges that must be overcome and potential research prospects for the future.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.222-229
• /
• 2024

As the operating condition for the penetrating missile has been more advanced, the survivability of main charge has been strongly required when the warhead impacts the target. Lots of efforts to desensitize explosives such as the development of insensitive molecular explosives or optimizing plastic-bonded explosives(PBX) systems has been made to enhance the survivability of main charge. However, these efforts face their limits as the weapon system require higher performance. Herein, we suggest a new strategy to secure the survivability of main charge. We applied structurally supportable aluminum honeycomb(HC) structure to cast PBX. The aluminum HC structure reinforces the mechanical strength of cast PBX and helps it to withstand external pressure without the reaction like detonation. In this study, impact resistance character, shock sensitivity and internal blast performance of PBXs reinforced with HC structure were investigated according to the application of aluminum HC structure. The newly suggested aluminum HC structure applied to cast PBX was proved to be a promising manufacturing method available for high-tech weapon systems.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2197-2204
• /
• 2000

리그닌은 펄프나 제지공장에서 나무의 화학적 처리를 하는 과정에서 생성되는 주요한 부산물이다. 이런 리그닌은 난분해성 물질로서 제지폐수의 생물학적 처리에 어려움을 초래하며, 특히 함량이 높을 경우 혐기성 소화에서 억제(inhibition) 물질로 작용하는 것으로 알려져 있다. 본 연구에서는 회분실험을 통하여 혐기성 소화에서 온도와 혐기성 소화 슬러지의 양에 따른 고분자 활엽수 리그닌(lignosulfonate, MW $\geq$ 20,000)의 영향을 관찰하였다. 고분자 활엽수 리그닌은 혐기성 소화 초기에는 메탄생성에 강한 억제작용을 하였으나 일정한 시간이 지난 후에는 이런 억제작용은 사라지고 메탄생성이 정상적으로 이루어졌다. 즉, 고분자 활엽수 리그닌은 aceticlastic methanogen에 대해 bacteriocidal 작용보다는 bacteriostatic 물질로서 작용하였다. 리그닌이 첨가되지 않은 대조군의 경우에는 메탄생성이 10일간 이루어지는데 반하여 1.3%, 2.6%와 3.9%의 리그닌이 첨가된 경우에는 같은 양의 메탄올 생성하는데 각각 14.5일, 17.8일 과 21.1일이 소요되었다. 2.6%의 리그닌을 첨가한 경우 초기 8일간은 $30^{\circ}C$ 조건에서의 메탄생성속도가 가장 컸으나 12일째부터 $40^{\circ}C$에서의 메탄생성속도가 급속히 증가하여 14일 후에는 총 메탄생성량이 $30^{\circ}C$를 초과하였다. 그러나 $50^{\circ}C$에서는 줄곧 메탄생성이 거의 이루어지지 않았다. 즉, aceticlastic methanogen에 대한 리그닌의 억제작용을 중온 (mesophilic)보다 고온(thermophilic)에서 더 컸다. 리그닌에 의한 이런 억제작용은 또 리그닌의 양(L)과 초기 혐기성 소화슬러지의 농도(AnS)의 비와 중요한 관계가 있었다. L/AnS의 비가 작으면 작을수록 이런 억제작용은 감소되는 것으로 나타났다. 그리고 본 실험에서 고분자 활엽수 리그닌의 분해와 탈색은 이루어지지 않았다.

• 농업과학연구
• /
• 제25권1호
• /
• pp.52-67
• /
• 1998

본 연구는 포유동물의 젖에 함유되어 있는 lactoferrin(LF)의 생리적 특성을 밝혀 기능성 식품 특히 항균작용을 이용한 식품제조업에의 이용을 위한 기초자료를 얻고자 실시하였다. 따라서 젖소의 초유로부터 lactoferrin을 분리 정제하여, 소화부위에 따른 lactoferrin의 항균활성을 분석하고자 pepsin, trypsin 및 chymotrypsin으로 분해하여 lactoferrin의 항균력을 측정하고, gel-filtration으로 분리 정제된 각각의 fraction별로 단백질을 정량하여 Escherichia coli와 Staphylococcus aureus에 접종하여 항균효과를 지니는 각 효소별 fraction의 분자량과 peptide fragment를 검토하였다. 1. 젖소의 초유로부터 분리 정제된 lactoferrin(LF)을 단백질 분해 효소인 pepsin, trypsin 및 chymotrypsin으로 분해한 결과 bovine lactoferrin은 SDS-PAGE를 수행하여 band를 확인할 수 있었다. pepsin으로 분해된 lactoferrin은 분자량 14KDa까지에서도 band를 확인할 수가 없었으며, trypsin과 chymotrypsin으로 분해한 lactoferrin은 분해되지 않은 lactoferrin이 존재함을 나타내고, 33KDa에서도 band를 확인할 수 있었다. 2. Sephadex G-50 column을 사용하여 bovine lactoferrin를 효과적으로 정제하였다. Sephadex G-50 column chromatography를 수행 한 결과 bovine lactoferrin은 Tris-HCl사이에서 용출되었으며, pepsin, trypsin 및 chymotrypsin으로 분해한 lactoferrin은 각각 2, 3, 2 개의 peak를 보였고, HPLC 분석결과 첫번째 peak는 주로 분해되지 않은 lactoferrin 수용체가 존재하는 것으로 확인되었으며, trypsin과 chymotrypsin처리에서 항균효과도 유사점을 관찰할 수 있었다. 3. 효소처리한 lactoferrin의 항균효과를 알아보기 위하여 Escherichia coli와 Staphylococcus aureus를 접종하여 항균활성을 비교하였다. 그 결과 각 효소에 대하여 pepsin으로 처리한 lactoferrin을 접종한 시험구가 대조구에 비하여 낮은 생장율을 보여 현저한 항균활성을 지님을 알 수 있었다. 그리고 trypsin과 chymotrysin에 의한 분해물도 미생물 배양 8시간까지는 효소 처리전 bovine lactoferrin보다는 항균활성을 나타냄을 알 수 있었다. 4. Sephadex G-50 column을 사용하여 분리 정제된 bovine lactoferrin fraction별로 SDS-PAGE를 실시한 결과 lactoferrin fraction의 경우는 chromatography 수행 결과와 비교하여, pepsin과 chymotrypsin 분해물은 저분자량임을 알 수 있었고, trypsin에 의한 lactoferrin만이 단일 band를 보임으로서 단백질 분해의 특징을 볼 수 있었다.

• Elastomers and Composites
• /
• 제49권1호
• /
• pp.43-52
• /
• 2014

브롬화 이소부틸 이소프렌 (BIIR) 고무의 점착성에 미치는 나노점토(Cloisite 20A)의 영향을 조사하였다. 고무내 나노점토의 분산성은 SEM, TEM, XRD으로 분석하였다. 나노점토 충전 및 미충전 고무의 열적안정성은 TGA로 분석하였으며, 충전고무에서 열적안정성을 보였다. 또한 나노점토를 첨가하면 보강효과에 의해 고무의 강도가 증가하였다. 나노점토 첨가로 계면간 분자확산 정도는 감소할 것으로 판단되었지만, 본 연구에서 관찰된 분자확산에 의해 형성된 계면의 두께는 분자사슬간 엄킴현상을 유발하는데 충분하여 계면점착력이 증가하는 것으로 나타났다. 계면점착력 증가현상은 일정한 이상 (8 phr)의 나노점토가 첨가되었을 때 나타났다. 나노점토 첨가에 따른 표면특성의 변화를 조사하기 위해 접촉각 측정을 하였는데 큰 변화는 관찰되지 않았다.

• Molecular & Cellular Toxicology
• /
• 제2권2호
• /
• pp.134-140
• /
• 2006

Because shipyard workers are involved with various manufacturing process in shipyard industry, and they are exposed to many kinds of hazardous materials. Especially, painting workers were exposed polycyclic aromatic hydrocarbons (PAH). This study was conducted to assess the exposure status of PAH based on job-exposure matrix. We investigated the effect of genetic polymorphism of xenobiotic metabolism enzymes involved in PAH metabolism on levels of urinary metabolite. A total of 93 shipbuilding workers were recruited in this study. Questionnaire variables were age, sex, use of personal protective equipment, smoking, drinking, and work duration. The urinary metabolite was collected in the afternoon and corrected by urinary creatinine concentration. The genotypes of CYP1A1, CYP2E1, GSTM1, GSTT1 and UGT1A6 were investigated by using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) methods with DNA extracted from venous blood. Urinary 1-OHP levels were significantly higher in direct exposured group (spray and touch-up) than indirect exposed group. Urinary 1-OHP, concentration of the high exposure with wild type of UGT1A6 was significantlyhigher than that of the high exposure with other UGT1A6 genotype. In multiple regression analysis of urinary 1-OHP, the regression coefficient of job grade was statistically significant (p<0.05) and UGT1A6 was not significant but a trend (p<0.1). The grade of exposure affected urinary PAH concentration was statistically significant. But genetic polymorphism of xenobiotics metabolism enzymes was not statistically significant. Further investigation of genetic polymorphism with large sample size is needed.