• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.121-127
• /
• 2010

In present work, sulfonated poly(arylene biphenyklsulfone ether) copolymers containing hydroquinone moiety were successfully synthesized using 4,4'-bis[(4-chlorophenyl)sulfonyl]-1,1'-biphenyl(BCPSBP), hydroquinone sulfonic acid potassium salt(sHQ), 4,4'-sulfonyldiphenol and evaluated their characteristics. Three kinds of polymer electrolyte membranes, PBPSEH-HQ00, PBPSEH-HQ10 and PBPSEH-HQ30 were prepared by using mole fraction of sulfonated hydroquinone(sHQ). The structure of the fabricated polymers was analyzed using NMR, IR and GPC. The Mw(weight-average molecular weights) of the polymers were in the range of 62,000-213,000 g $mol^{-1}$, and the molecular weight distribution (Mw/Mn) varied from 1.66-4.04. The thermal analysis of the copolymers was carried out by TGA and DSC. The temperature of Td5% and Td10% was decreased with the mole fraction of sHQ but Tg was increased with the mole fraction. The water uptake, IEC and ion conductivity were increased with increasing the ionic cluster of the polymers. The proton conductivity equal to 9.4 mS $cm^{-1}$ was measured for the PBPSEH-HQ30 membrane at $90^{\circ}C$ and 100% relative humidity. From the observed results it is clear that the prepared hydrocarbon membrane can be considered as suitable polymer electrolyte membrane for the application of PEMFC.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.2
• /
• pp.47-56
• /
• 1997

To examine of possibility protein recycling of shaving scraps contained chrome generated from manufacturing process of leather, the characteristics of hydrolyzed protein that differently treated with MgO as alkaline agent were investigated. In alkaline hydrolysis of saving scraps treated with MgO, MgO had to be treated over 5.0% to maintain over pH 8.0 that is insoluble of chrome. Under the condition of alkaline treated with MgO, the solubility of chrome is low with about 60%. The average molecular weight of hydrolyzed proteins from shaving scraps treated with MgO was about 80~100 KD. The amino acid contents of that were largely collagen proteins such as glycine, alanine and proline, and acidic amino acids such as aspartic acid and glutatamic acid. The contents of Mg, Ca and Na in hydrolyzed protein were too much as liquid fertilizer, and chrome contents was 30~40 ppm that largely decreased in comparing with raw materials (40,000~42,000 ppm).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.182-191
• /
• 2016

The purpose of this research was the optimization of protein hydrolysate production using a commercial enzyme bromelain 1200 derived from the leg of Yeonsan Ogae by response surface methodology. Yeonsan Ogae has long been known as supporting health and high efficacy treatment. In recent days, as the efficacy of functional peptides becomes more known, optimization of oligopeptide production and its characteristics from Ogae leg meat has been performed. Response surface methodology was performed for optimization of enzyme hydrolysis. The process was varied in pressure (30 to 100 MPa), time (1 to 3 h), and substrate concentration (10 to 30%). The degree of hydrolysis, amino acids, and molecular weight of products were analyzed. The optimum conditions were determined to be a pressure of 100 Mpa, time of 3 h, and substrate concentration of 20%. Under optimized conditions, degree of hydrolysis was 34.10%. The average molecular weight of protein hydrolysates was less than 1,000 Da. Major amino acids were leucine, lysine, alanine, glutamic acid, and phenylalanine.

• Journal of Korean Society on Water Environment
• /
• v.21 no.5
• /
• pp.484-489
• /
• 2005

In order to determine the removal rate of non-biodegradable substances and the change of their structural properties, this study was carried out by an ozone-treatment experiment on leachate collected from the landfill area of D City in Chung chung nam-do and examined the change of the chemical properties of non-biodegradable substances. The main elements of non-biodegradable substances in landfill leachate were benzene, toluene, trichloroethane, trichloroethylene, xylene, etc. and the concentration of toluene was 15.7 mg/L on the average, benzene 7.2 mg/L, trichloroethane 1.1 mg/L, trichloroethylene 0.75 mg/L and xylene 0.5 mg/L. When leachate was treated with ozone for 10 min, 30 min and 60 min, UV absorbance was reduced with the increase of reaction time, and the reduction rate was 38.6% at 60 min. TOC was removed by 13.2% at 60 min. The low reduction rate of TOC may be because TOC reacts indirectly with OH radical produced from reaction with ozone while UV absorbance usually relies on direct reaction between organic matters and ozone molecules. Color was removed by up to 97%, which suggests that ozonation is highly effective in removing coloring elements in leachate. Sixteen kinds of non-biodegradable compounds were found in the leachate and most of them had the characteristic of aromatic hydrocarbon. Among them dibutyl phthalate was identical with a substance included in the list of US EPA, which is classified as a mutagen that may cause the mutation of genes and disorders in chromosomes. In addition, 2,5-Cyclohexadiene-1,4-dione, 1,2-Benzenedicarboxylic acid and butyl octyl ester were found to be similar to substances listed by USEPA. According to the result of analyzing structural changes before and after ozonation using GC-MS, cyclic compounds and aromatic compounds were observed in the original water and aliphatic compounds were newly observed after ozonation. In addition, through ozonation, humic substances of high molecular weight were oxidized and decomposed and produced low-molecular compounds such as aldehyde, ketone and carboxyl acid and highly biodegradable aliphatic carbon, which suggests the bio-degradability of non-biodegradable substances.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.121-126
• /
• 2013

Background: Significance of HPV infection and genic mutation of APC and K-ras in rectal cancer has been investigated but not clarified. The objective of our study was to investigate these parameters in patients with rectal cancer to analyze correlations with biological behaviour, to determine relationships among the three, and also to demonstrate survival prognosis effects. Methods: From December 2007 to September 2008, 75 rectal cancer cases confirmed by histopathology in the Tumor Hospital of Xinjiang Medical University were enrolled. The control group consisted of normal rectal mucous membrane taken simultaneously, a least 10 cm distant from the carcinoma fringe. HPV DNA, the MCR of APC and exon-1 of K-ras were detected by PCR and PCR-SSCP. All results were analyzed in relation to clinical pathological material, using chi-square and correlation analysis via SPSS.13 and Fisher's Exact Probability via STATA. 9.0. All 75 patients were followed up for survival analysis using Kaplan-Meier and Log-rank tests. Results: 55 out of 75 cases demonstrated gene HPV L1 while it was notdetected in normal rectal mucosa tissue. HPV infection was correlated with age and lymphatic metastasis (P<0.05) but not other characteristics, such as ethnicity, tumor size, histological type, tumor type, Duke's stage and infiltration depth. Some 43 cases exhibited APC genic mutation (57.3%) and 34 K-ras genic mutation (45.3%). APC genic mutation was correlated with gender(P<0.05), but not age, histological type, infiltration depth, lymphatic metastasis and Duke's stage. In 55 cases of rectal cancer with HPV infection, there were 31 cases with genic mutation of APC (56.4%) and 24 with genic mutation of K-ras (43.6%). For the 20 cases of rectal cancer with non-HPV infection, the figures were 12 cases (60%) and 10 (50.0%), respectively, with no significant relation. Survival analysis showed no statistical significance for K-ras genic mutation, APC genic mutation or HPV infection (P>0.05). However, the survival time of the patients with HPV infection was a little shorter than in cases without HPV infection. Conclusions: Our results suggest that HPV infection might be an important factor to bring about malignant phenotype of rectal cancer and influence prognosis. Genic mutation of APC and K-ras might be common early molecular events of rectal cancer, but without prognostic effects on medium-term or early stage patients with rectal cancer.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.579-588
• /
• 2016

The aim of this study was to investigate and development collagen peptide materials from skate skin. Protein and fat content of collagen peptide showed about 95% and 0.1%, respectively. Average molecular weight of collagen peptide was measured as 1,015. In the analysis of amino acid, glycine and hydroxy proline content in collagen peptide was 19.32% and 16.25%, respectively, showing a typical characteristics of the collagen peptide. In obese db/db mice ingested 500 mg/day of collagen peptide for 18 days, the amounts of food and water intake were decreased considerably, contents of triglyceride, total cholesterol were decreased significantly in white adipose tissue of db/db mice. The final yield of collagen peptide was 17.23% in the optimized process for mass production. These results indicate that collagen peptide from skate skin may serve as candidates of fat reduction in adipose tissue and could be used as functional food and cosmetic ingredients.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.10-24
• /
• 2013

The state-of-arts of multiscale simulation (MSS) in science and engineering is briefly presented and MSS for process development (PD-MSS) is proposed to effectively apply the MSS to the process development. The four-level PD-MSS is composed of PLS (process-level simulation), FLS (fluid-level simulation), mFLS (microfluid-level simulation) and MLS (molecular-level simulation). Characteristics and methods of each level, as well as connectivity between the four levels are described. For example in PD-MSS, absorption column, fluidized-bed reactor, and adsorption process are introduced. For successful MSS, it is necessary to understand the multiscale nature in chemical engineering problems, to develop models representing physical phenomena at each scale and between scales, to develop softwares implementing mathematical models on computer, and to have strong computing facilities. MSS should be performed within acceptable accuracy of simulation results, available computation capacity, and reasonable efficiency of calculation. Macroscopic and microscopic scale simulations have been developed relatively well but mesoscale simulation shows a bottleneck in MSS. Therefore, advances on mesoscale models and simulation tools are required to accurately and reliably predict physical phenomena. PD-MSS will find its way into a sustainable technology being able to shorten the duration and to reduce the cost for process development.

• Biomedical Science Letters
• /
• v.26 no.3
• /
• pp.230-237
• /
• 2020

Staphylococcus aureus (S. aureus) is known as a bacterium that can cause skin infections, respiratory system infections, and sinusitis; however, it can exist as a normal flora rather than a pathogen. Recently, methicillin-resistant S. aureus (MRSA) infections have emerged in the community as a new variant of community-associated (CA)-MRSA. In the present study, S. aureus and MRSA were isolated and cultured by collecting samples from facilities and environments where students and educational personnel have multiple contacts on university campuses; specifically, the nostrils and hands of college students were tested from July to September of 2019. The molecular properties of the isolated MRSA were analyzed, and the one MRSA strain was isolated from the university campuses. One MRSA that was isolated and cultured on campus was the mec complex group A and staphylococcal cassette chromosome (SCC) mec type II, which is a characteristic of healthcare-associated (HA)-MRSA, and SCCmec type V, which is a characteristic of CA-MRSA. This result was similar to other studies wherein the SCCmec type II was detected in SCCmec typing analysis in CA-MRSA. To confirm whether there is a new variant of CA-MRSA in the Republic of Korea, additional follow-up studies on the analysis of virulence factors of MRSA are needed by additionally separating CA-MRSA from the body parts of university students and educational personnel.

• BMB Reports
• /
• v.40 no.3
• /
• pp.315-324
• /
• 2007

The novel $\alpha$-amylase purified from locally isolated strain, Bacillus sp. KR-8104, (KRA) (Enzyme Microb Technol; 2005; 36: 666-671) is active in a wide range of pH. The enzyme maximum activity is at pH 4.0 and it retains 90% of activity at pH 3.5. The irreversible thermoinactivation patterns of KRA and the enzyme activity are not changed in the presence and absence of $Ca^{2+}$ and EDTA. Therefore, KRA acts as a $Ca^{2+}$-independent enzyme. Based on circular dichroism (CD) data from thermal unfolding of the enzyme recorded at 222 nm, addition of $Ca^{2+}$ and EDTA similar to its irreversible thermoinactivation, does not influence the thermal denaturation of the enzyme and its Tm. The amino acid sequence of KRA was obtained from the nucleotide sequencing of PCR products of encoding gene. The deduced amino acid sequence of the enzyme revealed a very high sequence homology to Bacillus amyloliquefaciens (BAA) (85% identity, 90% similarity) and Bacillus licheniformis $\alpha$-amylases (BLA) (81% identity, 88% similarity). To elucidate and understand these characteristics of the $\alpha$-amylase, a model of 3D structure of KRA was constructed using the crystal structure of the mutant of BLA as the platform and refined with a molecular dynamics (MD) simulation program. Interestingly enough, there is only one amino acid substitution for KRA in comparison with BLA and BAA in the region involved in the calcium-binding sites. On the other hand, there are many amino acid differences between BLA and KRA at the interface of A and B domains and around the metal triad and active site area. These alterations could have a role in stabilizing the native structure of the loop in the active site cleft and maintenance and stabilization of the putative metal triad-binding site. The amino acid differences at the active site cleft and around the catalytic residues might affect their pKa values and consequently shift its pH profile. In addition, the intrinsic fluorescence intensity of the enzyme at 350 nm does not show considerable change at pH 3.5-7.0.

• Korean journal of food and cookery science
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1988

The physicochemical properties and gel-forming properties of corn & red bean crude starches were investigated. The results were as follows: 1. The shape of corn crude starch granule was polygonal and the mean value of minor axis and major axis were $11.5\mu\textrm{m}$ and $14.9\mu\textrm{m}$, respectively. In the meantime, the shape of red bean crude starch granule was oval and the mean value of minor axis and major axis were $22.3\mu\textrm{m}$ and $31.4\mu\textrm{m}$. 2. Amylose content of corn and red bean refined starch were 16.52 and 43.61% respectively. 3. Blue value of corn and red bean crude starch were 0.099 and 0.842, respectively. 4. Amylose of corn had molecular weight of 107,000 and degree of polymerization of 660. Amylopectin had degree of branching of 6.9 per 100 glucose units and glucose units of 14.6 persegment of amylopectin. Amylose of red bean had molecular weight of 118,000 and amylopectin had degree of branching of 5.2. 5. Water binding capacities of corn and red bean starch were 238.5 and 284.8. 6. Both swelling powers of corn and red bean starch were increased rapidly from $70^{\circ}C$ to $90^{\circ}C$. 7, Gelatinization of corn and red bean were 75.6 and $61.8^{\circ}C$. 8. Brabender hot-paste viscosities of corn at 6% and 8% showed the similar amylogrm patterns with peak viscosity. And red bean had no peak viscosity. 9. The difference of sensory characteristics for ‘Mook’ and kidney bean & red bean starch gels was significant.