• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.367-371
• /
• 2019

산업 현장에서 많이 사용하는 중공형 제품에 대한 성형은 가열과 냉각에 의해 회전 성형하게 된다. 제품에 대한 품질 향상을 위해 균일한 냉각이 필요하고, 생산성 향상을 위해 빠른 시간의 냉각이 요구된다. 본 논문에서는 팬에 의한 강제 냉각이 없는 경우와 팬에 의한 강제 냉각이 있는 경우로 크게 냉각 조건을 구분하였다. 또한, 팬에 의한 강제 냉각이 없는 경우에 대하여 성형기가 수평으로 정지해 있는 조건과 수직으로 정지한 조건으로 구분하였다. 그리고 팬에 의한 강제 냉각을 확인하기 위해 팬이 가동되지 않은 상태에서 성형기만 회전하는 조건과 하부의 팬만 작동하는 경우, 상단과 하단의 팬이 작동하는 조건으로 설정하였다. 이와 같이 성형기의 냉각의 결과를 여러 조건의 공기 냉각 조건에 대해 회전성형기의 표면 온도를 STAR-CCM+ 프로그램으로 해석한다. 총 5개의 조건에 대해 회전성형기의 온도 분포를 해석하였으며, 각 조건에서 냉각에 대한 성형기의 표면 온도 분포를 비교하였다. 5개의 Case 중 Case4가 900sec 후 약 35℃로 가장 낮았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.144.2-144.2
• /
• 2010

Bipolar plate는 고분자 전해질 연료전지(PEMFC)에서 핵심 부품 중의 하나이고, 전해질 막이나 촉매 등에 비해서는 상대적으로 쉽게 접근할 수 있기 때문에 많은 연구가 수행되고 있다. Bipolar plate를 제조하는 기술은 크게 금속을 프레스 가공하는 방법, graphite 판을 직접 밀링하는 방법 및 고분자/카본계의 press molding 법 등 3가지로 분류되며, 본 연구에서는 3번째 방법에 의해서 bipolar plate를 대량 생산하는 방법에 대해 연구하였다. 고분자 매트릭스는 에폭시계 수지를 사용하였고, 카본계 재료는 graphite 분말과 carbon nanotube를 사용하였다. 이들 재료들을 일정한 비율로 혼합한 후 differential scanning calorimetry(DSC)를 사용하여 열분석 하였고, 그 결과를 Kissinger equation에 대입하여 경화반응 속도론을 연구하였다. 또한, 경화된 에폭시/탄소 복합재료의 전기전도도, 유리전이온도, 표면에너지 특성 등을 분석하였다.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.154-163
• /
• 1997

Thermally-induced deformation in SMC(Sheet Molding Compound) products is analyzed using three dimensional finite element method. Planar fiber orientation, which causes the anisotropic material properties, is calculated through the flow analysis during the compression stage of the mold. Also curing process is analyzed to predict temperature profile which has significant effects on warpage of SMC products. Through the developed procedure, effects of various process conditions such as charge location, mold temperature, fiber contents, and fiber orientations on deformation of final products are studied. and processing strategies are proposed to reduce the warpage and the shrinkage.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.150-153
• /
• 2001

The present work concerns optimal design for the injection molding process of a deflection yoke (coil separator). The optimal design for the injection molding process is developed using design of experiments and finite element analysis. Two design of experiments approaches are applied such as: the design of experiment for mold design and the design the experiments for determination of process parameters. Finite element analyses have been carried out as a design of experiments for mold design: runner system and cooling channel. In order to determine optimal process experiments have been performed for various process conditions with the design of experiments scheduling.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.184-187
• /
• 2002

Compression molding was specifically developed for replacement of metal components with composites. As the mechanical properties of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding conditions. In this study, the effects of the fiber mat structure(NP: 5, 10, 25punches/$\textrm{cm}^2$) and the mold closure speed($\dot{\textrm{h}}$=0.1, 1, 10mm/min) on the viscosity of composites were discussed. The composites is treated as a Non-Newtonian power-law fluid. The parallel-plate plastometer is used and the viscosity is obtained from the relationship between the compression load and the thickness of the specimen.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.29-32
• /
• 2001

The objective of this work was to optimize processing parameters of hybrid thermoplastic composites in compression molding. The mechanical properties of the composites manufactured with various forming conditions were measured to characterize processing parameters. Polypropylene(PP) composites containing randomly oriented long carbon fiber and carbon black were used in this work. The composite materials contained 5%, 10%, 15%, and 20% carbon fiber and 5%, 10%, 15%, 20%, and 25% carbon black by weight. Compression molding was conducted at various mold temperatures. The temperature of the material in the mid-plain was monitored during the forming. Crystallinity was also measured by using XRD. The tensile modulus of the composites increase, with increasing the mold temperature. However, the impact strength of the composites decreases as mold temperature increases.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.84-91
• /
• 1997

In producing moldings by using an injection mold, several variables such as the metal mold and the condition of injection molding should be selected properly in order to obtain good quality of moldings. In this study, focussed are the mechanical properties of injection moldings, since many researches on injection have been focussed mainly on the molding quality, injection pressure, and bulk temperature but the properties of injection moldings have not been studied extensively. The mechanical properties of present injection moldings can be improved simply by changing the molding material and the injection conditon without changind the metal mold. To have the final products meet the specified molding quality and mechanical properties at the same time, the bulk temperature of injection, pressure variation, volumetric shrinkage, stress, and cooling should be analized by CAE(computer aided engineering) after injection mold design. In this paper, the effects of dischare condition on mechanical properties of injection moldings are studied by testing the moldings which are injected by varying injection conditions.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.66-72
• /
• 2007

A computer code was developed to simulate the filling stage of an injection/compression molding process using a finite element method. The constitutive equation was the compressible Leonov model and the PVT relationship was assumed to follow the Tait equation. The flow-induced birefringence was related to the calculated flow stresses through the linear stress-optical law. Simulations of a disk under different processing conditions, including variations of the compression stroke and compression speed, were performed to determine their effects on the flow-induced birefringence. Simulated pressure traces were also compared to those obtained in conventional injection molding and with experimental data from the literature.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.81-85
• /
• 2000

The surface gloss of the injection molded part is one of the most significant point for evaluation the quality of products appearance. The effects of molding condition on the gloss of HIPS(High Impact Poly Styrene) molded part were investigated in this work. The measurements of gloss on the surface of molded part were carried out with different melt temperature, mold temperature, injection pressure and holding pressure. We observed the result of HIPS gloss compared with our's previous ABS study. The more melt and mold temperature increased, the brighter the gloss increase. Holding and injection pressure had little effect on the gloss. The gloss was effected in order of melt temperature, mold temperature, injection pressure, holding pressure.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1348-1356
• /
• 2002

The present work concerns the optimal design for injection molding processes by using the design of experiments (DOE) and numerical analysis. The DOE approaches is planned to be able to consider two-way interaction, and have been applied progressively for both mold design and process design. Numerical analyses have been carried out as a design of experiments for mold parameters such as runner specifications and cooling channel configurations. In order to determine optimal process parameters, experiments have been performed for various process conditions with the DOE scheduling. As a result, the quality and productivity of the product have been improved, and the proposed approach can be successfully reflected on the industrial injection molding process of precision electronics parts.