• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.991-997
• /
• 2011

본 논문은 EPP 비드폼에 대한 증기실 조형공정의 기본 원리들과 과정들에 대해 다루고 있습니다. 증기실 조형은 EPP 기술을 위한 필수적인 공정입니다. 그러나 증기실 조형의 공정조건에 대해 연구가 거의 이루어져 있지 않습니다. EPP 폼의 특징들은 에너지흡수, 다양한 충격보호, 가벼운 무게, 구조상의 견고성과 내구성 등이다. 본 연구에서는 증기실 조형에서 증기압을 변화시켜 EPP 폼 제작을 위한 최적조건을 찾고자 노력하였으며, 무엇보다 증기조형 제품의 수축을 방지하기 위하여 EPP 폼 조형후 노내 가열을 수행하였다. 다른 노내 가열 온도들에서 시간에 따라 무게가 바뀌는 것을 관찰함으로써 폼수축의 메커니즘을 확인하는 것이 가능하였다. 인장시험과 SEM 해석을 수행하여 이들 실험결과들을 뒷받침할 수 있었고, 다른 증기압들에서 조형된 제품들에 대해 치수안정성을 조사하였다.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.771-777
• /
• 2014

자동차용 도어그립을 대상으로 하여 3 차원 엠보 패턴이 인쇄된 필름을 적용한 인서트성형을 구현하기 위하여 사출압축성형을 사용하였다. 진공금형을 제작하여 필름 열성형을 하였으며, 필름인서트성형을 위하여 사출압축금형을 개발하였다. 3 개의 압력센서를 설치하여 금형 캐비티압력을 측정하였으며, 다양한 압축스트로크와 토글속도에 대한 사출압축성형 실험을 수행하여, 공정조건이 캐비티 압력과 엠보 패턴의 높이에 미치는 영향을 고찰하였다. 압축스트로크 0.9mm와 느린 토글속도에서 엠보 패턴의 유지율이 높게 나타났다. 또한 엠보패턴이 최대 높이를 갖기 위한 공정조건은 캐비티 압력의 적분값이 최소가 되는 조건과 거의 동일하였다. 사출압축성형을 사용하여 엠보 패턴이 인쇄된 소프트한 촉감을 갖는 플라스틱 제품을 구현할 수 있다.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.7-13
• /
• 2015

The production processes were reviewed through the injection analysis of the shift lever as a core component of an auto lever installed in the automatic transmission of cars. The injection analysis was carried out for the shift lever and rod among the components in a shift lever module. The shift lever and rod are designed for injection molding with the insertion of a tube, a pin cable plate, and a steel rod for securing the strength of the product. The charging time, failure of injection molding, weld line, air trap, and deformation were reviewed according to this insert. Analyses on various gate positions were carried out for reviewing the cultivation and deformation of fiber around major components, such as the generation section of manipulation feeling and assembly section, so that optimal gate conditions might be reviewed and reflected in the mold design. Finally, we plan to compare the analysis results with the production of trial products.

• Design & Manufacturing
• /
• 제8권2호
• /
• pp.1-6
• /
• 2014

The narrow-pitched connectors are of interest for small-scale devices such as smart phones because of theirs caling. We conducted an injection molding analysis and a warp analysis for 0.3mm and 0.5mm pitch FPC connectors. We obtained a volumetric shrinkage of 4.344%, a clamping force of 0.2529 tonne, a maximum injection pressure of 76.3 MPa as optimized molding conditions for the 0.3mm pitch FPC connector. We found that, compared with the traditional injection molding technique, the injection molding for narrow-pitched connectors comes with distinct features like low clamping force, high injection molding pressure, and narrow gate size. Adding to the optimization analysis, the deflection of 0.5mm pitch FPC connector was analyzed as well. A maximum deflection of 0.053mm was calculated, which the actual deflection of 0.062mm was compared to. The results deduced a relative error of 17%. We conclude that the deflection analysis along with the optimization analysis can be used as an effective tool to predict the behavior of narrow-pitch connectors although the relative error may need to improve.

• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.202-210
• /
• 2011

The fabrication method of aspheric lens is changed from machining to press molding so as to improve the productivity. In the case of the press molding method, the temperature control of the molding die is most important, because the temperature of each molding die determines the quality of lens. But any practical method for direct measuring of the lens temperature and the die internal temperature is yet unknown. Besides, in the case of the press molding system in which the heating and pressing and cooing of a die is done at separate work stations, the lens productivity of the system for small lens is yet too low. The paper shows an improved structure of convective sequential system, the lens productivity of which is three times as many as the conventional convective system. To know the die internal temperature, numerical results are given using ANSYS. A new convective sequential system is developed and tested. Finally, the Taguchi method is applied in order to optimize the setting conditions of individual work station of the system.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.67-74
• /
• 2010

The fabrication method of aspheric lens is changed from machining to press molding so as to improve the productivity. In the case of the press molding method, the temperature control of the molding die is most impotent, because the temperature of each molding die determines the quality of lens. But any practical method for direct measuring of the lens temperature and the die internal temperature is yet unknown. Besides, in the case of the press molding system in which the heating and pressing and cooing of a die is done at one work station, the cycle time for the system is yet too long. The paper shows an improved structure of radiant sequential system in which the heating and pressing and cooing of dies is done at individual work station so as to cut down the cycle time. To know the die internal temperature, numerical results are given using ANSYS. An experimental radiant sequential system is developed and tested. Finally, the Taguchi method is applied in order to optimize the setting conditions of individual work station.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.60-65
• /
• 2001

To simulate the real molding conditions, the effects of phase change and compressibility of the resin were considered in the present investigation. A modified Cross model with either an Arrhenius-type or WLF-type functional form was used for modeling viscosity of the resin. A double-domain Tait equation of state was employed to describe the compressibility of the resin during molding. The energy balance equation including latent-heat dissipation fur semi-crystalline materials was solved in order to predict the solidified layer and temperature profile. Injection molding experiments were carried out using polypropylene(PP) in the present study. Based on the comparison between experiments and simulations, it was found out the predicted pressure distributions and melt front propagations were accurate. Thus it was concluded that the program developed in this study was proved to be useful in simulations of injection molding process.

• 반도체디스플레이기술학회지
• /
• 제2권1호
• /
• pp.7-9
• /
• 2003

In order to predict the moldability of an injection molded part, a simulation of filling is needed. Short shot is one of the most frequent troubles encountered during injection molding process. The adjustment of process conditions is the most economic way to troubleshoot the problematic short shot in cost and time since the mold doesn't need to be modified at all. But it is difficult to adjust the process conditions appropriately in no times since it requires an empirical knowledge of injection molding. In this paper, the intelligent CAE system synergistically combines fuzzy-neural network(FNN) for heuristic knowledge with CAE programs for analytical knowledge. To evaluate the intelligent algorithms, a cellular phone flip has been chosen as a finite element model and filling analyses have been performed with a commercial CAE software. As the results, the intelligent CAE system drastically reduces the troubleshooting time of short shot in comparison with the expert's conventional way which is similar to the golden section search algorithm.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.127-129
• /
• 2002

In order to predict the moldability of an injection molded part, a simulation of filling is needed. Short shot is one of the most frequent troubles encountered during injection molding process. The adjustment of process conditions is the most economic way to troubleshoot the problematic short shot in cost and time since the mold doesn't need to be modified at all. But it is difficult to adjust the process conditions appropriately in no times since it requires an empirical knowledge of injection molding. In this paper, the intelligent CAE system synergistically combines fuzzy-neural network(FNN) for heuristic knowledge with CAE programs for analytical knowledge. To evaluate the intelligent algorithms, a cellular phone flip has been chosen as a finite element model and filling analyses have been performed with a commercial CAE software. As the results, the intelligent CAE system drastically reduces the troubleshooting time of short shot in comparison with the expert's conventional way which is similar to the golden section search algorithm.

• 마이크로전자및패키징학회지
• /
• 제8권4호
• /
• pp.53-57
• /
• 2001

사출성형공정에서 미성형은 가장 빈번하게 발생하는 성형불량중의 하나이다. 이러한 미성형을 해결하기 위해 가상 경제적인 효율적인 방법은 공정조건을 개선하는 일이다. 그러나 대부분의 경우 사출 전문가의 오랜 기간 축적된 경험과 지식에 의존하기 때문에 여러 번의 시행착오을 겪어야 한다. 따라서 본 논문에서는 퍼지 알고리즘을 기반으로 하여 시스템에 적합한 공정조건을 찾는데 있어 시행착오를 줄이고, 또한 비전문가도 쉽게 적용학 수 있는 지능형 공정조건 생성 시스템을 제안하였다.