• 제목/요약/키워드: Mold-Design

검색결과 1,177건 처리시간 0.031초

전처리 방법이 무청의 표면 미생물 변화에 미치는 영향 (Effects of Pre-treatment Method on the Surface Microbes of Radish (Raphanus sativus L.) leaves)

  • 구경형;이경아;김영림;이명기
    • 한국식품영양과학회지
    • /
    • 제35권5호
    • /
    • pp.649-654
    • /
    • 2006
  • 품종별 무청의 표면 미생물 분포와 중심합성계획과 반응 표면분석법을 이용하여 물세척, 마이크로웨이브처리 및 스팀처리를 독립변수로 두고, 이들 전처리 조건에 따른 표면미생물의 변화를 조사하였다. 그 결과 무청 품종에 관계없이 병원성 미생물인 Salmomella spp., Camphylobacter spp., Vibrio spp., Shigella spp., Staphylococcus spp., Enterococcus spp. 및 Pediococcus spp.는 전혀 검출되지 않았다. 그러나 총균수의 경우는 품종에 따라 약간의 차이는 있었는데, $3.90{\times}10^5{\sim}1.20{\times}10^7CFU/g$의 범위를 보였고, 대장균군은 $1.10{\times}10^2{\sim}2.00{\times}10^5CFU/g$, 효모/곰팡이는 $2.40{\times}10^3{\sim}3.55{\times}10^6CFU/g$을 보인 반면 젖산균은 검출되지 않은 시료도 있었다. 또 전처리 방법에 따른 무청의 잔존 미생물의 감균 효과가 가장 좋은 전처리 방법은 스팀처리 방법이었다. 원료 무청의 각각의 전처리 방법을 독립변수(independent variables)로 하고, 총균수, 젖산균수 및 효모/곰팡이균수를 종속변수(dependent variables)로 하여 회귀 분석한 결과 상관관계를 나타내는 $R^2$값이 각각 0.89, 0.87, 0.85로 상관성이 높았으며, 물세척 횟수에 의한 감균 효과는 제한적이므고 마이크로웨이브처리나 스팀처리를 병행하여야 효과적이었다.

R&E 융합적 사례: IoT 기반 무선 디바이스 성형연구 (Convergent Case Study of Research and Education: Internet of Things Based Wireless Device Forming Research)

  • 이정익
    • 한국융합학회논문지
    • /
    • 제6권4호
    • /
    • pp.1-7
    • /
    • 2015
  • 본 연구는 이과계통의 고교생들과 함께 연구한 연구(RESEARCH) 및 교육(EDUCATION)의 사례연구이다. 최근 발달한 사물인터넷(IoT)[9-15] 기반의 여러 가지 연구주제가 존재한다. 본 연구는 이들 중 이동형 통신기기중 가장 초보단계이면서도 학생들이 쉽게 접하고 제작방법을 따라 갈 수 있는 무선 호출기의 성형과정을 연구 주제로 정하였다. 우리는 이것을 페이저라고 한다. 오늘날 복잡하고 빅 데이터를 사용할 수 있는 대용량 스마트 이동형 통신기기[9-15]가 나와 있다. 그 이전 무선 호출기는 우리 삶에 이동 통신 수단의 첫 의미를 가르쳐 준 기기였다. 내부 구조도 비교적 간단하고 기능도 비교적 단순하여 이제 막 대학의 이공계에 관심을 가진 고교생들의 교육 사례로 적합하다고 생각된다. 본 연구는 사출성형 해석의 ONE CAVITY해석이라는 비교적 간단한 내용으로 무선호출기의 기구, 전자적인 내용을 모두 살펴볼 수 있다. 나아가 학생들에게 대량생산 및 공정자동화에 대한 융합교육의 의미도 일깨워 줄 수 있는 좋은 교육 사례로 평가된다.

유한요소법을 이용한 복합재료의 충격에 관한 해석 (Analysis on the Impact of Composite by Using FEM)

  • 김성수;김영춘;홍순직;국정한;김세환;조재웅
    • 한국산학기술학회논문지
    • /
    • 제14권2호
    • /
    • pp.542-547
    • /
    • 2013
  • 본 연구에서는 알루미늄 폼 코어 복합재료의 기계적 성질을 시뮬레이션 해석을 통하여 고찰하였다. 시험편 모델에는 50J, 70J, 100J의 충격에너지를 가하였다. 50J, 70J 및 100J의 충격에너지에 대해서는 각각 3.4 ms, 3.2 ms 및 3.2 ms의 시점에서 최대하중이 발생하였다. 50J의 충격에너지를 가한 경우는 스트라이커가 복합재료의 상부 면재를 뚫고, 심재까지 손상을 입혔다. 그러나 하부 면재까지는 손상이 없이 그대로이었고 52 J의 에너지가 발생하였다. 70J의 충격에너지를 가한 경우는 스트라이커가 상부 면재를 관통한 후 하부 면재까지 손상을 주었고 65 J의 에너지가 발생하였다. 100J의 충격에너지를 가한 경우는 스트라이커가 면재와 심재를 완전히 관통하여 손상을 주었다. 스트라이커가 상부 면재를 관통하는 시점에서는 최대하중이 되고 그 후로는 하중이 급격히 감소하다가 하부 면재에 도달할 때에 다시 급격히 증가하고 있다가 감소하였고 95 J의 에너지가 발생하였다.

대형다짐시험 및 표준다짐시험을 이용한 파쇄암 성토재의 다짐특성 연구 (The Study of Compaction Characteristics of Cataclasite Fill Material using Large and Standard Compaction Tests)

  • 정재형;류상훈;최동엽;박광식;황성필
    • 지질공학
    • /
    • 제26권4호
    • /
    • pp.439-445
    • /
    • 2016
  • 신축되는 공항은 미래 항공수요를 선점하고 주변지역 공항들과의 경쟁에서 앞서나가기 위해, 고품질의 활주로를 건설하고자 체계적으로 활주로 하부지반 건설에 임하고 있다. 본 연구에서는 여객계류장 운영시 하부 연약지반의 잔류침하를 최소화 할 수 있도록 시공관리하기 위하여 기존의 표준다짐시험의 단점을 보완하는 연구를 하고자 하였으며, 직경 100 mm 이하의 성토 재료를 사용한 4개소 현장에서 성토재료를 채취하여 표준다짐시험(KS F 2312), 대형원형몰드 다짐시험, 물치환 현장밀도시험(ASTM D 5030)을 수행하였다. 현장밀도시험과 표준 실내다짐시험의 상관관계를 회귀분석 하면, 유의수준(P-value) 0.05에서 신뢰할 수 없는 값을 나타내었으며, 현장밀도시험과 대형 실내다짐시험의 회귀분석 결과 상관계수(R)가 0.8878로 상관관계가 높게 나타났다. 설계 및 시공에 사용되는 최대건조밀도를 평가할 때 성토재료의 최대치수를 고려하여 다짐시험방법이 선택되어야만 현장여건이 충실히 반영되어 전체적으로 균질한 품질의 시공이 이루어 질 수 있을 것으로 판단된다.

복합감각 기능증진 개념의 헬스케어 목욕시스템 개발 (Development of Healthcare Bathing System for Improving the Multisensory Functions)

  • 김형지;유미;진혜련;권대규
    • 감성과학
    • /
    • 제13권2호
    • /
    • pp.309-316
    • /
    • 2010
  • 본 연구에서는 단순 세정의 개념이 아닌 복합감각 증진 개념의 헬스케어 목욕 시스템을 개발하고자 한다. 헬스케어 감성욕조를 디자인하기 위해 우선 타입별 특성을 고찰하였다. 이를 기반으로 복합감각 자극용 전신 욕조를 개발하였고, 이 전신욕조는 감성자극용 전신욕조 월풀, 시청각 감각 자극 기능이 구비된 욕조 커버, 제어용 소형 PC, 터치패널, DMB 패널, 시각 감성 증진을 위한 칼라 가변형 LED 무드 시스템과 스피커로 구성되어 있다. 제작된 복합감각 증진 개념의 헬스케어 욕조시스템의 특성을 고찰하기 위해서 목욕을 하는 동안 인체 자율신경계에 미치는 영향을 분석하였다. 전반적으로 목욕 상태에서의 심박변이율은 실험 중 교감신경에 비해 부교감신경이 계속 증가하는 것으로 나타났고, 목욕을 시작한지 15분이 경과하면 교감신경이 증가하고 부교감신경이 감소하여, 피험자가 목욕을 한지 15분일 때 가장 편안한 상태를 느끼는 것을 알 수 있었다. 또한 목욕 실험 결과 전후의 혈압이 최고 16mmHg까지 떨어진 것으로 나타났으나 맥박은 증가하였다. 이것은 심장으로부터 혈액의 유출량이 많아져 혈류량이 증가하는 것으로 복합감각 증진용 헬스케어 욕조 시스템을 이용한 목욕이 혈액 순환에 긍정적인 영향을 보였다. 본 연구의 결과를 가지고 복합감각 기능증진 헬스케어 목욕시스템의 사용성과 사용자의 생리분석을 통한 기초결과를 통해서 사용자의 생리변화를 분석함으로써 제품의 사용성과 사용자의 생리적 변화 및 감성 간의 관계를 보다 더 명확하게 밝혀낼 수 있으리라 기대한다.

  • PDF

Isosterism을 이용한 새로운 1,3-thiazoline 유도체의 디자인 및 신규 2,4-diimino-1,3-thiazolidine 유도체의 살균 활성 (Design of new 1,3-thiazoline derivatives by isosterism and antifungal activity of new 2,4-diimino-1,3-thiazolidines)

  • 한호규;남기달;임철수;마혜덕;김진철;조광연
    • 농약과학회지
    • /
    • 제7권1호
    • /
    • pp.51-57
    • /
    • 2003
  • 신농약 개발을 목적으로 isosterism 이론을 근거로 하여 선도화합물인 2-imino-1,3-thiazoline 의 분자 수정을 통하여 분자내에 1,3-thiazoline과 urea기가 포함된 새로운 화합물 4를 디자인하였다. N-Alkylthiourea 5와 bromoacetonitrile을 에탄올 용액 중에서 반응시켜 위치 선택적으로 생성된 2,4-diimino-1,3-thiazolidine 브롬산 염 6을 isocyanate 유도체와 반응하여 화합물 4의 tautomer인 화합물 8을 얻었다. 합성된 화합물 13종을 대표적인 6종의 식물병원균, 벼 도열병, 벼 잎집무늬마름병, 오이 잿빛곰팡이병, 토마토 역병, 밀 붉은녹병, 보리 흰가루병 등에 대한 in vivo 항균력 시험을 하였다. 합성된 화합물 8의 벼 도열병원균에 대한 항균력은 2-phenylimino-1,3-thiazoline 1과 비교할 때 매우 낮았으며, 일부 화합물에서 밀붉은녹병에 대한 미약한 항균력을 나타냈다.

Sn 및 Cu를 첨가한 치과 주조용 Co-Cr-Mo계 합금제조 및 용해과정 분석 (Manufactures of dental casting Co-Cr-Mo based alloys in addition to Sn, Cu and analysis of infrared thermal image for melting process of its alloys)

  • 강후원;박영식;황인;이창호;허용;원용관
    • 대한치과기공학회지
    • /
    • 제36권3호
    • /
    • pp.141-147
    • /
    • 2014
  • Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.

한국의 과채류 재배 스마트 온실 실태: 온실 환경 및 병해충 관리 (Present Status of Smart Greenhouses Growing Fruit Vegetables in Korea: Focusing Management of Environmental Conditions and Pests in Greenhouses)

  • 박영균;백성훈;임재성;김민중;이준호
    • 한국응용곤충학회지
    • /
    • 제59권1호
    • /
    • pp.55-64
    • /
    • 2020
  • 스마트 온실은 주로 파프리카, 토마토, 딸기와 같은 과채류 작물을 대상으로 보급되었다. 스마트 온실의 보급량은 지속적으로 증가하고 있지만, 그 실태에 대한 조사는 부족하다. 그러므로, 이번 연구를 통해 한국의 스마트 온실의 시설 규모, 재배작물, 재배방법, 발생 병해충과 실사용자의 평가를 중심으로 한 현 실태를 파악하고자 하였다. 스마트 온실의 리스트는 각 권역별 현장지원센터로부터 제공받았으며, 모든 조사는 농가를 직접 방문하여 수행되었다. 조사된 스마트 온실 농가의 약 50%가 3,300 ㎡~6,600 ㎡ 사이의 규모로 운영하고 있었다. 조사된 농가 중 97.1%가 화학적 방법을 이용해 병해충을 방제하고 있었다. 조사된 농가에서 응답한 주요 식물병은 흰가루병과 잿빛곰팡이병으로 각각 54.4%, 33.8% 비율로 주로 문제가 되는 식물병이라고 응답하였다. 모든 토마토 농가에서 가루이류가 가장 문제가 되는 해충이라고 응답하였다. 그러나, 파프리카 농가의 76.5%, 70.6%가 총채벌레류와 진딧물류를 가장 문제가 된다고 응답하였다. 스마트 온실에 대한 사용자의 만족도는 10점 만점에 평균 7.5점이었다. 이 결과는 한국의 현재 스마트 온실을 관리하고 미래 스마트 온실을 설계하는 계획을 세우는 데 도움이 될 것이라 생각된다.

주조기와 매몰재의 성분변화에 따른 티타늄의 주조성에 관한 연구 (THE EFFECT OF CASTING MACHINE AND INVESTMENT ON THE CASTABILITY OF TITANIUM ALLOY)

  • 정다운;양홍서
    • 대한치과보철학회지
    • /
    • 제44권5호
    • /
    • pp.654-664
    • /
    • 2006
  • Statement of problem: There has been a eat interest in the use of titanium for fixed and removable prostheses in recent because of its excellent biocompatibility. However, the melting temperature and chemical reactivity of titanium necessities casting system different from those used in conventional casting. The current titanium casting systems are based on an electric-arc design for melting the metal in an argon atmosphere and its exclusive investment. Despite the new development in Ti casting system, inadequate mold filling and internal porosity are frequently observed casting defects. Purpose : The purposes of this study were to compare the castibility and reaction layer of the casting titanium under the two casting machines and their investment condition. Material and method: coping and machine-milled titanium coping according to the casting methods and the marginal configurations. The total 28 specimens were used, and these are divided into 4 groups according to 2 casting machines and 2 investments. The castings were analyzed using x-ray microanalysis and microhardness testing. The reaction layer between margin of titanium casting and the investments was observed and analyzed with scanning electron microscope. Result: 1. Castabiliy of casting titanium specimen was best in the group of centrifugal casting machine and Selevest $CB^{\circledR}$ and good that of Selevest CB and pressure differential casting machine, Rematitan plus and centrifugal casting machine, Rematitan plus and pressure differential casting machine in order. 2. There was no significanct correlation in titanium castability in respect of casting machine. However ANOVA indicated that Selevest $CB^{\circledR}$ groups had significantly better castability than Rematitan $plus^{\circledR}$ groups.(p<0.05) 3. There was a significant microhardness difference between centrifugal casting machine groups and pressure differential groups.(p<0.05) Titanium castings in centifugal groups had significantly harder than those in pressure differential groups. 4. The addition of zirconia decreased interfacial reactivity. Conclusion: above result revealed that of the castability of titanium casting specimens had little correlation in casting machines and was better in magnesia-based investment contained ZrO2 groups. However in order to practice casting titanium in clininic, its castability should be improved, also there should be more research on factor of castability so that long-span prothesis and removable partial denture metla frame may be casted completly.

종이 의상에 관한 연구 - 수제지를 중심으로 - (A Study on the Paper Clothing -on the basis of handmade paper-)

  • 이주실;김정혜
    • 복식
    • /
    • 제44권
    • /
    • pp.181-199
    • /
    • 1999
  • The industry of modern clothing has deviated from the overflow of commercialism and the standardization and nowadays is going toward pursuing art, creativity, and high added value. This trend brings the return of the natural materials from the synthetic textiles and increases the value of old and handmade fabrics. Finally, the handmade-paper, which is a natural material, comes to be reconsidered as a new material for the clothing. Therefore, as the natural materials and the manufacture of handmade clothing are rising again, the qualitative improvement and globalization of clothing industry should be first realized through the developments of creative and various clothing materials and new expressing techniques. The above investigation and study have been synthesized and analyzed as follows: First, through the study on the origin of the paper clothing, its historical background and the process of its development, we've learned these two facts following : the paper clothing of the East in the past mostly had practiced meanings. On the other hand, in the West it had meanings which were raised the artist's emotions and beauty-consciousness to the artistic level by the various kinds of expressing methods. Second, handmade-paper was manufactured by the embedding method, which mixed mulberry pulp, gauze, corn, hair, sisal, silk and so on. It was found that handmade-paper had the affluent and proper texture as the clothing material and was be able to control the clarity through the variation of thickness. It was also confirmed that the creative and original texture with hand-worked molding beauty was obtained by the use of handmade-paper. Third, when the handmade-paper is used, the molding beauty of plane, relievo, and solid can be freely pursued, and various and effective molding conformation can be constructed by the effect of superposition and repetition. Also, because the maximum discretion from the various optional manufacturing methods is allowed, the molding beauty can be maximized when the clothes are manufactured with handmade-paper. Fourth, the gauze with strong drape was combined to overcome the stiffness and the tearing of the paper. As a result, the durability and the wearability of the paper were strengthened and thus the thus the applications as the clothing material were enlarged. In conclusion, in order to enhance the value, creativity, practicality, and artistic sense of the design for modern clothing, the clothes made of handmade-paper should be more studied. Moreover, for the generalization of paper clothes, the studies on the development of practical paper with paper with water resistance, post-treatment after dyeing, flexibility, and durability should be done. I really hope that this study will be the motive to provoke the possibility of handmade-paper as new clothing material in not only practical sense but also artistic sense.

  • PDF