• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.816-818
• /
• 2016

산업 4.0은 생산 설비 스스로 작업 방식을 결정하여야 한다. 하지만 중소기업에서는 여전히 이러한 작업 방식에 대한 준비가 미비한 수준이다. 본 논문에서는 생산 설비 스스로 작업을 진행할 수 있는 CPS 기반의 금형 수명 관리 시스템에 대한 연구를 진행하였다. 금형 수명 관리 시스템은 금형의 shot를 통해 금형의 수명을 관리하며, 이리한 금형 수명 정보는 사용자에게 클라우드를 통해 제공된다. 이를 통해 생산 품질을 향상시켜 열약한 중소기업의 경영활동에 직간접적인 기대 효과를 높일 수 있을 것이라 기대한다.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.179-184
• /
• 2013

An accident from machine work is often fatal to the worker. This accident is mostly preventable through perfect process jig. In case of this machine work, however, the disaster frequently occurred because of the design which is not considered the beginning of product design, post-process and mass process of production. As for sand casting method, this has the merits of the production; the product is easily produced by manual labor. On the other hand, this method has the demerits of a bigger dimensional error contrary to other mass process of production. When the sand casting product is in machine work, there are various problems such as unsafe fix and excessive cutting, product desorption and rapid life depreciation of equipment and tools. Considering the characteristics of sand casting method, it is accepted as difficulty to improve the problems. In this study, it suggests shell mold method for mold instead of the machine work after the sand casting of the circle shape container product. And the surface accomplishes the following average of surface roughness Ra$9.94{\mu}m$ of machine work with the casting of flask mold by shell mold method. In accordance with the simplification of processing process and reducing the average thickness variation by mass production of product with detailed appearance, it has a good influence on safety accident prevention caused by production and damaged product. It is confirmed that making higher degree of size precision of all machine work product is possible to increase the safety and productivity, reduce the processing process and improve environment.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.279-285
• /
• 2013

소형 복합재료 프로펠러를 제작하기 위한 기존의 알루미늄 몰드를 복합재료 몰드로 대체하기 위한 타당성 연구를 수행하였다. 소형 알루미늄 프로펠러의 세 날개는 복합재료 몰드를 만들기 위해 플러그로서 사용되었다. GRPG 복합재료 몰드와 프로펠러는 실내온도에서 압축과 진공법을 이용하여 불포화된 폴리에스테르 수지, Epovia 겔코트, 우븐과 매트 유리 섬유 등으로 만들어졌다. 표면의 경도와 거칠기, 압축과 흡입 몰드에 의한 강도와 변형은 실험에 의해 결정되었다. 결과는 ISO 484/2 규격과 몇몇의 알루미늄 합금과 비교되었다. 결과로부터 몰드의 변형은 날개 두께에 관한 공차를 만족하는 것을 알 수 있었다. GRPG 복합재료 몰드의 몇 가지 특징은 알루미늄 합금 몰드보다 좋았으며(표면의 매끈함, 중량, 작동 능력과 비용), 다른 몇 가지 특징들은 비슷하였다(분리 능력과 라이프 사이클). 결과적으로 복합재료 몰드는 소형 복합재료 선박 프로펠러를 만들기에 적합한 것을 알 수 있었다.

• 식물병연구
• /
• 제23권4호
• /
• pp.372-378
• /
• 2017

In this study, we identified the causative agent of post-harvest gray mold on broccoli that was stored on a farmers' cooperative in Pyeongchang, Gangwon Province, South Korea, in September 2016. The incidence of gray mold on broccoli was 10-30% after 3-5 weeks of storage at $3^{\circ}C$. Symptoms included brownish curd and gray-to-dark mycelia with abundant conidia on the infected broccoli curds. The fungus was isolated from infected fruit and cultured on potato dextrose agar. To identify the fungus, we examined the morphological characteristics and sequenced the rDNA of the fungus and confirmed its pathogenicity according to Koch's postulates. The results of the morphological examination, pathogenicity test, and sequencing of the 5.8S rDNA of the internal transcribed spacer regions (ITS1 and ITS4) and three nuclear protein-coding genes, G3PDH, HSP60, and RPB2, revealed that the causal agent of the post-harvest gray mold on broccoli was Botrytis cinerea. To our knowledge, this is the first report of post-harvest gray mold on broccoli in Korea.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1154-1159
• /
• 2006

The mold transformers have been widely used in underground substations of large building and have some advantages when compared with oil-transformer. Those advantages are low fire risk, environmental compatibility, compact size and high reliability. The mold transformer is generally known to have cooling duct between low voltage and high voltage coil. To achieve better compact structure and low loss, mold transformers made by one body molding method has been developed. Nevertheless, such kinds of transformer need better cooling method because heat radiation between each winding is still of problem. The life of transformer is significantly dependent on the thermal behavior in windings. Many designers have calculated temperature distribution in transformers and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, the temperature distribution analysis of 100 kVA pole mold transformer for power distribution were investigated by FEM program and the thermal analysis results were compared with temperature rise test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.125-129
• /
• 2004

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss, but it needs some cooling method because heat radiation between each winding is difficult. The life of transformer is significantly dependent on the thermal behavior in windings. Many transformer designers have calculated temperature distribution and hot spot point by FEM(finite element method) to analyze winding temperature rise. In this paper, the temperature distribution and thermal stress analysis of 100kVA pole cast resin transformer for power distribution are investigated by FEM program.

• The Plant Pathology Journal
• /
• 제18권1호
• /
• pp.36-42
• /
• 2002

Resistance of perilla varieties to Botrytis cinerea LVF12 was evaluated, while antagonistic bacteria were selected and tested for their efficacy towards biological control of gray mold rot caused by B. cinerea. Among 11 perilla varieties tested for disease resistance, Milyang variety showed some degree of resistance, while the rest of varieties showed no resistance. Among 250 bacterial isolates collected from perilla loaves and rhizosphere of perilla plants, six isolates showed high levels of inhibitory effect on mycelial growth and conidial germination of B. cinerea in in vitro test. Using the pot test in growth chambers these isolates showed high levels of disease suppression, with Nl isolate showing 95.3% of control value and N4 isolate showing 90.8% of control value. Further test was performed to evaluate the two isolates ability for disease prevention and/or disease therapy, and results showed almost 100% of control vague. Isolates Nl and N4 were identified as Bacillus licheniformis and 5. megatepium, respectively, according to Bergey's manual, API 20E and 50CHB test kit, and Transmission electron microscope.

• Design & Manufacturing
• /
• 제8권1호
• /
• pp.35-39
• /
• 2014

Window roller housings are durable because high-quality source materials such as stainless steel is used in making them. After a series of precise structure analysis, their design is optimized. They are subject to repetitive driving tests of more 100,000 times, durability tests, impact resistance tests, corrosion tests and others. For a long time, gaps often occur in press molded products owing to serious squareness deformation and flatness deformation of them. Severe burrs in press molded products require frequent grinding, which leads to short life cycle and rough or unreliable movement of assembled roller housing, which, in turn, causes product defects. This study focuses on developing measures to resolve existing defects and to improve lifespan of dies by designing and making a window roller shearing die.

• 식물병연구
• /
• 제22권2호
• /
• pp.107-110
• /
• 2016

In October 2014, an occurrence of gray mold was observed on young fruits of sponge gourd (Luffa cylindrica) in Sachunmun, Gangneung, South Korea. Symptoms included abundant mycelia growth with gray conidia on young fruits and finally rotting the fruits. The fungus was isolated from symptomatic fruits and its pathogenicity was confirmed. Based on the morphological features and sequence analysis of ITS-5.8S rDNA, G3PDH, HSP60, and RPB2 genes, the pathogen was identified as Botrytis cinerea Pers. This is the first report of gray mold caused by B. cinerea on L. cylindrica in Korea.

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.78-82
• /
• 2008

Plastic gears are more and more widely used in many industrial machine elements. Plastic gear has higher properties such as light weight, wear resistance, and vibration absorbing ability than metallic gears. But, in case of using an inaccurate plastic gear, its tooth breakage happen and fatigue life is shortened due to increase of applying load and temperature rising on the tooth flank. Inaccuracy of plastic gears such as pitch circle roundness and tooth profile generates vibration and noise. In this study, an internal plastic gears which is molded by a new injection mold structure are developed. The new mold structure is called the HR3P(hot runner type 3plate mold) that has an improved runner system in order to have good filling balance. As a result from this study, an internal gear with very accurate roundness was developed by using design of experiment.