• 한국표면공학회지
• /
• 제52권1호
• /
• pp.43-51
• /
• 2019

The environmental pollution which is global warming and abnormal climate is caused by increasing population and activated economics. To reduce environmental pollution, we have being efforts into reducing $CO_2$ emission and use of energy, resources. Especially, for the sake of light weight and fuel efficiency of automotive industry, many countries have defined the restrict environmental regulation which stipulate high magnitude of reducing $CO_2$ emission. In this study, we have predicted the problem of Mu-cell injection molding through the finite element analysis as a function of temperature controlled by Joule heating or in terms of mold temperature. From the result of finite element analysis, we have determined the optimized process and made the injection mold included electric current heating system with Mu-cell manufacturing. Lastly, we analyzed the surface characteristics of the injection products with mold temperature.

• 동력기계공학회지
• /
• 제16권5호
• /
• pp.70-75
• /
• 2012

In mechanical industries, forging is one of the basic process. But comparing the other developed industries, forging industries can not reach at the level of that development. In forging industries, the quality of the products totally depends on the skills of workers and also the precision of the equipments. Particularly because the open die forging industry is unable to deviate from the past method of production and all works are manually progressed, the operator is always exposed to the danger. In the regard some additional device has been made especially. Thus, in this research, by using the forklift as the means for the manipulation of the development object system, it tries to be comprised the process automation. After than it is fitted with the forklift for safe and easy handling of jobs and products during open die forging process. First of all, development system mold has been assembled to the system, after than it is assembled with forklift. This development system has been applied for handling of large scale products more than 300kg, and the satisfactory result with uniform quality of the products have been achieved due to this mechanical setup.

• 한국주조공학회지
• /
• 제40권2호
• /
• pp.25-33
• /
• 2020

The effects of mold variable and main alloying element on the mechanical properties of ductile cast iron poured into shell stack mold were investigated. The strength and hardness of with the smaller cross-section of the diameter of 6.25mm were higher than those of 12.50mm. On the other hand, the elongation of the former was lower than that of the latter. The strength and hardness of the specimens obtained from the center layer in the 5-story stack mold were the lowest and those for other specimens were increased with increased distance from the center. The elongation of those were the highest of all. The strength and hardness of the specimens obtained from the center layer were decreased the elongation was increased with the increased number of layers. The strength and hardness were increased and the elongation was decreased roughly with the increased amounts of reaidual magnesium and carbon content added, respectively. The strength and hardness were increased and the elongation was decreased roughly with the increased amounts of silicon content added to 2.45wt% and rather decreased with that to 2.85wt%. The effect of silicon content showed the opposite tendency to those of residual magnesium and carbon content.

• 산업경영시스템학회지
• /
• 제30권4호
• /
• pp.85-95
• /
• 2007

Single PPM Quality Innovation activity made a great contribution to strengthening the quality competitiveness and the international competitiveness for the domestic small and medium enterprises. But it doesn't work to companies that deal with the particular products for the difficulties during the promotion and the business management. Then, SQ-Mark, which is currently adopted to domestic automobile companies, was benchmarked and studied for its accessibility and solutions. Quality Innovation activity in the particular industry is requested to conduct the confirmation and the inspection in deeper level caused by the specialty of product itself, product engineering manufacturing processes. This study improved 6 steps of the Single PPM activity so that the Single PPM Quality Innovation activity is progressed well for the Mold industry especially among the particular industries. It shows the improvement to the management of the delivery schedule, which has been problematic, if adopted to the relating industries based on this study, it is anticipated to help the corporate operation much.

• 한국수산과학회지
• /
• 제48권5호
• /
• pp.604-613
• /
• 2015

The objective of this study was to estimate the food quality of commercial boiled-dried Pacific herring Clupea pallasi as a substitute for boiled-dried anchovy. Standards for controlling quality of boiled-dried Pacific herring were suggested based on international (US FDA and CODEX) and domestic (Korean FDA, Standards on Quality of Seafood and Seafood Products, KS) standards for boiled-dried anchovy. The standards included requirements for moisture [less than 30% (less than 35 in very tiny sizes)], water activity (less than 0.85), salinity (less than 10%), water-phase salt (less than 20%), acid-insoluble ash (less than 1.5%), yeast and mold (fewer than 1.0×10³ CFU/g), and different size and breakage (less than 5%). Based on the standards suggested, commercial boiled-dried Pacific herring passed nine levels (all levels) in water activity, acid-insoluble ash, mold and yeast concentrations; seven levels (L-1, 2, 3, 4, M-1, 2, S) in water-phase salt, and three levels (L-1, 3, 4) in the ratio of different size and breakage categories. These results suggest that the quality of commercial boiled-dried Pacific herring is similar to that of commercial boiled-dried anchovy.

• Composites Research
• /
• 제12권2호
• /
• pp.70-81
• /
• 1999

고분자 복합재료 제조공정인 수지이동성형(RTM) 공정은 최근 들어서 고성능 재료를 필요로 하는 항공산업분야에서 관심의 대상이 되고 있다. 본 연구에서는 유한요소/관할부피 기법을 도입한 수치모사를 통해서 수지이동 성형공정에서의 금형충전단계를 해석하였다. 섬유직조망의 투과계수를 정량적으로 측정하고, 또한 수치모사에 이용된 프로그램을 검증하기 위하여 유동가시화 실험을 수행하였다. 실험에 사용된 강화섬유와 수지물질로는 여러 가지 형태의 섬유직조망과 실리콘 기름을 선택하였다. 수치모사와 유동가시화 실험을 병행함으로써 섬유직조망의 구조, 금형의 구조, 금형삽입체가 금형충전단계에서의 수지 유동선단의 형태에 미치는 영향을 살펴보았다. 모델링에 의해 예측된 유동선단은유동가시화 실험을 통해 관찰된 결과와 잘 일치한 것으로 나타났으나, 금형내 불균일한 섬유부피분율로 인해 섬유조직망의 투과계수가 전 영역에서 일정한 값을 가지지 못하기 때문에 약간의 차이를 보여주었다. 원형의 구조물이 금형내에 삽입되어 있는 경우, 월드라인의 위치를 예측된 유동선단으로부터 정성적으로 추정할 수 있었다.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.32-38
• /
• 2010

Laser material processing technology is adopted in several industry as alternative process which could overcome weakness and problems of present adopted process, especially semiconductor and display industry. In semiconductor industry, laser photo lithography is doing at front-end level, and cutting, drilling, and marking technology for both wafer and EMC mold package is adopted. Laser cleaning and de-flashing are new rising technology. There are 3 kinds of main display industry which use laser technology - TFT LCD, AMOLED, Touch screen. Laser glass cutting, laser marking, laser direct patterning, laser annealing, laser repairing, laser frit sealing are major application in display industry.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.61-71
• /
• 2006

Environment-friendly shock-absorbing (cushioning) materials were made using a vacuum forming method from waste wood collected from local mountains in Korea. The waste wood was pulped by thermomechanical pulping. The TMP cushions showed superior shock-absorbing properties with lower elastic moduli compared to EPS(Expanded Polystyrene) and pulp mold. Even though the TMP cushions made using at different suction times had many free voids in their inner fiber structures, their apparent densities were a little higher than EPS and much lower than pulp mold. The addition of cationic starch improved elastic modulus of the TMP cushions without increasing the apparent density, which was different from surface sizing with starch. The porosity of the TMP cushions was a little greater than EPS and much less than pulp mold. Finally, the TMP cushions have great potential to endure external impacts occurring during goods distribution.

• 산업경영시스템학회지
• /
• 제42권1호
• /
• pp.1-7
• /
• 2019

In the modern industrial period, the introduction of mass production was most important progress in civilization. Die-casting process is one of main methods for mass production in the modern industry. The aluminum die-casting in the mold filling process is very complicated where flow momentum is the high velocity of the liquid metal. Actually, it is almost impossible in complex parts exactly to figure the mold filling performance out with the experimental knowledge. The aluminum die-castings are important processes in the automotive industry to produce the lightweight automobile bodies. Due to this condition, the simulation is going to be more critical role in the design procedure. Simulation can give the best solution of a casting system and also enhance the casting quality. The cost and time savings of the casting layout design are the most advantage of Computer Aided Engineering (CAE). Generally, the relations of casting conditions such as injection system, gate system, and cooling system should be considered when designing the casting layout. Due to the various relative matters of the above conditions, product defects such as defect extent and location are significantly difference. In this research by using the simulation software (AnyCasting), CAE simulation was conducted with three layout designs to find out the best alternative for the casting layout design of an automotive Oil Pan_BJ3E. In order to apply the simulation results into the production die-casting mold, they were analyzed and compared carefully. Internal porosities which are caused by air entrapments during the filling process were predicted and also the results of three models were compared with the modifications of the gate system and overflows. Internal porosities which are occurred during the solidification process are predicted with the solidification analysis. And also the results of the modified gate system are compared.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.82-87
• /
• 2019

Recently, plastic materials have become more diversified, and the development of materials with excellent mechanical properties and plasticity has enabled wider application, miniaturization, and refinement of injection molded products. As a result, the utilization of these products in household goods, electronics, automotive parts, and aircraft parts is increasing in almost all industries. Injection molded parts are often used externally on finished commercial products. This means that the injection mold industry is very important to the value of these products. For this reason, the industry is performing research on the precision and efficiency of the injection molding process. In this study, we investigated the applicability of the core in core cooling method to the problem of product deformation due to temperature variation in existing injection mold designs. We also characterized the cooling performance of an injection mold when using this cooling method.