• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.391-397
• /
• 2017

최근의 DIC (Digital Image Correlation) 기술은 인장 시험 중 동적 변형을 측정하는 데 사용되고 있다. 표준 인장 시험 방법은 진응력 - 진변형 곡선을 계산하기 위해 두 표점 거리 간 측정된 평균 변위를 사용한다. 따라서, 진응력 곡선은 균일 연신 구간, 즉 네킹 변형 시작점까지만 유효하다. 반면에, DIC를 사용한다면, 전체 측정 영역에서 국부 변형을 측정할 수 있기 때문에 변형률 및 변형률 속도의 유효한 범위가 인장 시편이 파단될 때까지 확장될 수 있다. 이러한 장점 때문에 연구 및 산업 분야에서 많은 광학 3D 측정 시스템이 도입되고 사용되었지만 기존의 3D 측정 시스템은 측정하기에 너무 비싸고 시간이 많이 소요된다. 또한 장비 크기로 인해 휴대가 불편한 단점이 존재한다. 본 논문에서는 기존의 스마트 폰을 이용한 2D DIC 측정 방법과 수치 해석 기법을 사용하여 2D 측정 영상 데이터의 오차를 개선한 2D 영상 보정 방법을 수행 하였다. 2D DIC 수정 제안 된 방법의 결과는 3D 측정 장비의 정확도에 비해 더 높은 정확도를 보였다. 결론적으로, 제안 된 2D DIC 및 보정 방법이 정확하고 신속한 측정 결과를 제공한다는 것이 입증되었다.

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.429-439
• /
• 2015

This study develops a new brassiere for new silver women. A new brassiere design was developed for the silver generation based on apreliminary survey; subsequently, a wire and no-wire type of brassier were developed after a second fitting evaluation. The results were as follows. First, in terms of brassiere design, the cup shape was designed as mold type full cup, shoulder straps were designed as camisole type with cups, bias tape was designed for body correction in the side line and mash tape was designed for easy movement below the cups. On the other side ofthe cup shape was a pocketdesigned on a support pad forthe wire type and a support panel to serve as a wire in the no-wire type brassiere. Second, brassiere patterns were designed by referencing the educational H pattern. Thetotal length was elongated by 5cmto reduce pressure when wearing a brassiere and the height of the front center increased by 8cm for the stability of the front center of the brassiere. In addition, the side line was moved back by 3cm and the width of the brassiere wings was designed widely at 10.5cm. Third, a wearing test was conducted for the wire type and the no-wire type brassiere with comparison products, using a 7-point Likert scale. Appearance results and movement tests for the wire and no-wire type showed a higher score than comparison products.

• Restorative Dentistry and Endodontics
• /
• 제45권2호
• /
• pp.13.1-13.10
• /
• 2020

Objective: The aim of this study was to evaluate the influence of different modeling agents on the surface microhardness (Vickers hardness number; VHN), roughness (Ra), and color change (ΔE) of a nano-hybrid composite with or without exposure to discoloration by coffee. Materials and Methods: Sixty-four cylinder-shaped nano-hybrid composite specimens were prepared using a Teflon mold. The specimens' surfaces were prepared according to the following groups: group 1, no modeling agent; group 2, Modeling Liquid; group 3, a universal adhesive (G-Premio Bond); and group 4, the first step of a 2-step self-adhesive system (OptiBond XTR). Specimens were randomly allocated into 2 groups (n = 8) according to the storage medium (distilled water or coffee). VHN, Ra, and ΔE were measured at 24 hours, 1 week, and 6 weeks. The Kruskal-Wallis test followed by the Bonferroni correction for pairwise comparisons was used for statistical analysis (α = 0.05). Results: Storage time did not influence the VHN of the nano-hybrid composite in any group (p > 0.05). OptiBond XTR Primer application affected the VHN negatively in all investigated storage medium and time conditions (p < 0.05). Modeling Liquid application yielded improved Ra values for the specimens stored in coffee at each time point (p < 0.05). Modeling Liquid application was associated with the lowest ΔE values in all investigated storage medium and time conditions (p < 0.05). Conclusion: Different types of modeling agents could affect the surface properties and discoloration of nano-hybrid composites.