• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.855-864
• /
• 1998

The purposes of this study were to evaluate the cephalometric characteristics of Korean female patients with Class II division 2 malocclusion and to compare Korean females with Caucasian females who had same type of malocclusion. All of the samples had Class II division 2 malocclusion with deep overbite (more than 4mm) and full permanent dentition. These samples were divided into two groups according to the races: Group 1(N=16; Korean females; average age=18Y 2M) and Group 2 (N:20; Caucasian females; average age=14Y 2M). The pretreatment lateral cephalograms were measured, analyzed and compared by using 38 variables and independent t-test. And the results were as follows: 1. Although there were no differences in Overbite, SN to mandibular plane angle, Palatomandibular plane angle, and FMA between Group 1 and 2, the other vertical relation variables of maxilla and mandible (SN to palatal plane angle, SN to occlusal plane angle, ODI) of Group 1 showed more clockwise rotation tendency of occlusal plane and less hypodivergency tendency than those of Group 2. 2. There were no differences in mandibular body length and ramus height between Group 1 and 2 except small upper genial angle of Group 1. There was less counterclockwise rotation tendency of mandible in Group 1. 3. There were no statistical significant differences in UAFH/LAFH and PFH/AFH between Group 1 and 2. 4. Although there were no differences of overjet and anteroposterior position of mandible between Group 1 and 2, the position of maxilla of Group 1 was more retropositioned than that of Group 2. 5. Except the more protrusion of lower incisor to A-Pog of Group 1, there were no differences of inclination and distance of upper and lower incisors to basal plane between Group 1 and 2. 6. The distance from upper- first molar to palatal plane showed no difference between Group 1 and 2. But the distance from lower first molar to mandibular plane of Group 1 was greater than that of Group 2. So it may be partially related to the clockwise rotation of occlusal plane and the less counterclockwise rotation tendency of mandible of Group 1. 7. Group 1 had more protrusive upper and lower lips than Group 2.

• Imaging Science in Dentistry
• /
• v.33 no.2
• /
• pp.79-83
• /
• 2003

Purpose : To assess the relationship between the direction of the indicating rod of the radiographic stent for ideal prosthetic design and the actual possible path of implant fixture placement when residual ridge resorption is considered. Materials and Methods: The study materials consisted of 326 implant sites (male 214 cases and female 112 cases) from a total of 106 patients (male 65 patients and female 41 patients) who desired implant prostheses. Computed tomography of patients were taken and reformatted using ToothPix/sup (R)/ software. Bony defects, bony sclerosis, the change of the direction of indicating rod, and root proximity of the adjacent teeth were examined on the CT-derived images. Results: The rate of the irregular crestal cortex was relatively high on premolar and molar area of maxilla. Mandibular molar area showed relatively high rate of focal sclerosis on the area of implant fixture insertion. The position of the indicating rods were relatively acceptable on the molar areas of both jaws. However, the position of the indicating rods should be shifted to buccal side with lingual rotation of the apical end on maxillary anterior teeth and premolar area. Conclusion: Clinically determined rod direction and position of the indicating rod for implant placement was not always acceptable for insertion according to the reformatted CT images. The pre-operative treatment plan for implant should be determined carefully, considering the state of the alveolar bone using the reformatted CT images.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.151-162
• /
• 1993

The author installed $3.75mm\times10mm$ $Br{\aa}nrmark$ osseointegrated implants and $3.5mm\times8mm$ I.T.I. hollow screw implants(Benefit) as a free standing abutment to replace lower left and right molars of 44-year-old female patient. Form the foregoing procedure, the author obtained the following results. 1. Free-standing $Br{\aa}nrmark$ and I.T.I. Hollow screw implants(Benefit) could be used to replace molars effectively without reduction of adjacent natural teeth, 2. Rotation of occlusal gold screw of $Br{\aa}nrmark$ implants was observed under occlusal force. 3. Adjustment of height of I.T.I. abutments was necessary in the mandibular second molar because of the limited occlusal clearance. 4. Form the oral examination, patient comments, panoramic and periapical radiographs, there were no pain, gingival imflammation and mobility, but slight reduction of alveolar bone level was shown around both implant systems. 5. Patient comments were comfortable on both systems. but the patient complained about economic problem of $Br{\aa}nrmark$ system and long treatment treatment time of both systems.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.10 no.1
• /
• pp.8-15
• /
• 2001

The Class III malocclusion classified in two types of Skeletal Class III and Pseudo Class III. In the case of the maxillary deficiency, the protraction H-G(facemask) with Bonded RPE can be used. For children with A-P and vertical maxillary deficiency, the preferred treatment is to move the maxilla into a more anterior and inferior position, which also increases its size as bone is added at the posterior and superior sutures. Successful forward repositioning of the maxilla can be accomplished before age 8. To resist tooth movement as much as possible, the maxillary teeth should be splinted together as a single unit. The maxillary appliance must have hooks for attachment to the facemask that are located in the canine-primary molar area above the occlusal plane. The facemask usually worn until a positive overjet of 2-5mm is achieved interincisally. Occipital chin cup is successful in those patients who can bring their incisors close to an edge-to-edge position when in centric relation. This treatment is particularly useful in patients who begin treatment with a short lower anterior facial height, as this type of treatment can lead to an increase in lower anterior facial height. If the pull of the chin cup is directed below the condyle, the force of the appliance may lead to a downward and backward rotation of the mandible.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.7-22
• /
• 1985

The purpose of this study was to analyze the stress distribution and the displacement in the maxillary complex after the application of the reverse headgear. The direction of force was parallel to the occlusal plane. Orthopedic force,300gm, was applied to the maxilla of the dry human skull in a forward direction. The stress distribution and the displacement within the maxillary Complex was analyzed by a 3-dimensional finite element method. The results were as follows: 1. The stress distribution at the molar region was greater than that at the anterior. 2. The stress distribution at the lateral side of the premaxilla was greater than that at the middle aide, especially high stress was noted at the canine eminence. 9. Compressive stress was noted only at the frontozygomatic suture of the zygomatic arch. 4. A forward, upward, and sideward displacement was noted at the entire nodal points of the zygomaticomaxillary suture portion. A displacement with a slight rotation was observed on the transverse palatine suture. 5. The maximum stress was observed at the lateral side of the maxillary tuberosity area, and generally the forward and downward displacement was noted at all this area.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.2
• /
• pp.303-314
• /
• 1993

The purpose of this study was to find out the prevalence of dental anomalies in 600 normal persons (male:363, female:237) at age 14 to 39 years, through history taking, oral examination, and radiographic observations of subjects. The obtained results were as follows: 1. The prevalences of individual dental anomalies were as follows; Congenitally missing teeth 7%; supernumerary teeth 1.33%; ectopic eruption; 8.50%, transposition;0.33% rotation; 23.67%, microdontia;11.16%(peg lateralis;5.33%, third molar;5.83%), prolonged retention of deciduous teeth;1.33%, crowding 49.83%, and spacing;15.17%. 2. Alterations in numbers of teeth : The most frequently missing teeth were mandibular lateral incisors, followed by mandibular second premolars and maxillary second premolars. In numbers of congenitally missing teeth per person, 52.38% had one missing tooth and 30.95% had two missing teeth. In supernumerary teeth, there was higher rate in male than in female. Most supernumerary teeth were mesiodens of median area in maxilla and the eruption pattern of that teeth generally was unerupted state. 3. In transposition, exchange of position of teeth involved the canine and first premolar. 4. Congenital missing rate of permanent successors in prolonged retention of deciduous teeth was 69.23%. 5. Crowing and spacing had respectively higher rate in mandible and in maxilla.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.394-407
• /
• 2004

The Purpose of this study was to evaluate the effect of the lower third molar on treatment time and distal en masse movement of the lower dentition in Giass III malocclusions. Thirty subjects (9 males and 27 females) were selected, all of whom were diagnosed as Glass III malocclusion and treated by fixed appliances without premolar and/or molar extraction. They were divided into three groups Group 1 consisted of 12 subjects. whose lower third molars were not extracted during the whole orthodontic treatment. Group 2 consisted of 8 subjects. whose lower third molars were extracted after WEAW application and before removal of the orthodontic appliances. Group 3 consisted of 10 subjects whose lower third molars were extracted before MEAW application. For each subject. overall treatment time and duration of MEAW application were determined. In addition. pre-treatment and post-treatment lateral cephalometric radiographs were analyzed. All data were Processed statistically with ANOVA, and the conclusions were as follows: There was no significant difference among the groups in overall treatment time However, duration of MEAW application was longer in Group 2 than in Group 1 or Group 3. The overjet that was established after orthodontic treatment was largest in Group 3, in which the lower third molars were extracted befor MEAW application. After orthodontic treatment, IMPA decreased in Group 3. but increased in Group 1 and Group 2. There was no significant difference among the three groups in the translation of lower second molars However the tipping movement of lower second molars was significantly different, highest in Group 2 and lowest in Group 1 Therefore. it is thought to be better for the orthodontic treatment of Class III malocclusions to extract the lower third molars before MEAW application. In Group 2, the mandibular plane angle was decreased as a result of forward rotation of the mandible This skeletal change was thought to bring about the difficulty of treatment.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.521-534
• /
• 1999

The purpose of this study was to find the difference of stress distribution on canine altered by the application point of preangulated T-loop spring. For this study, the finite element models of upper left canine, upper left second premolar and upper left first molar were made. Also, the finite element models of $0.017{\times}0.025$ inch preangulated, preactivated T-loop spring and $0.018{\times}0.025$ inch stainless steel wire were made. Three types of T-loop spring were made . the middle of activated T-loop is positioned in accordance with the middle position of distance of bracket position of both the canine and first molar, 2mm anterior, 2mm posterior. We compared the forces and the distribution of stress that were generated by the difference of position of T-loop spring. The results were as follows. 1. All of the 3 types of T-loop spring showed the similar retraction forces. 2. All showed the similar amount & pattern of stress distribution. 3. The centers of rotation of canine in 3 types of T-loop spring were same and were positioned between C and D plane. 4. The canine showed the intrusive force by 2mm anterior positioned T-loop spring, but the extrusive force by 2mm posterior positioned T-loop suing. Neverthless, because of the small amount of the forces, the effect of vertical force was not significant.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.644-648
• /
• 2005

Supernumerary tooth was resulted from excessive proliferation of dental lamina and associated with familial tendency and a congenital syndrome such as Cleidocranial dysostosis or Gardner's syndrome. Incidence reports identify a range of $0.3{\sim}0.8%$ in primary dentition, $1.0{\sim}3.5%$ in permanent dentition with males being affected twice as frequently as females, maxilla nine times as frequently as mandible. The most common supernumerary tooth is the mesiodens, which located between the maxillary central incisors, and the next common site is the fourth molar and lateral incisors. Supernumerary teeth are uncommon in the mandible, but premolars are the most common supernumerary teeth and occurrence is very rare in the incisor region of the mandible and the incidence is 2%. We need a early diagnosis and appropriate treatment plan because of possiblilty of diastema and eruption failure displacement, rotation of the associated permanent teeth, root resorption and dentigerous cyst with presence of the supernumerary teeth. In this two case, one supernumerary tooth located in the mandibular incisor region, the other supernumerary tooth located in premolar region. We could get normal alignment of mandibular dentition by extraction and orthodontic treatment.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.25-38
• /
• 2001

The purpose of this study was to compare the force, the displacement and the stress distribution on the maxillary first molars altered by the application of various asymmetric head-gear. For this study, the finite element models of unilateral Cl II maxillary dental arch was made. Also, the finite element models of asymmetric face-bow was made. Three types of asymmetric face-bow were made : each of the right side 15mm, 25mm and 35mm shorter than the left side. We compared the forces, the displacement and the distribution of stress that were generated by application of various asymmetric head-gear, The results were as follows. 1. The total forces that both maxillary first molars received were similar in all groups. But the forces that mesially positioned tooth received were increased as the length of the outer-bow shortened, and the forces that normally positioned tooth received were decreased as the length of the outer-bow shortened. 2. In lateral force comparison, the buccal forces that normally positioned tooth received were increased as the length of the outer-bow shortened, and the buccal fortes that mesially positioned tooth received were decreased as the length of the outer-bow shortened. Though the net lateral force moved to the buccal side of normally positioned tooth as the length of the outer-bow shortened, both maxillary first molars received the buccal force. That showed 'Avchiai Expansion Effect' 3. The distal forces, the extrusion forces and the magnitudes of the crown distal tipping that mesially positioned tooth received were increased as the length of the outer-bow shortened, and the forces that normally positioned tooth received were decreased as the length of the outer-bow was shortened. 4. The magnitude of the distal-in rotation that normally positioned tooth received were increased as the length of the outer-bow was shortened. But, mesially positioned tooth show two different results. For the outer-bow 15mm shortened, mesially positioned tooth showed the distal-in rotation, hut for the outer-bow 25mm and 35mn shortened, mesially positioned tooth showed the distal-out rotation. Thus, the turning point exists between 15mm and 25mm. 5. This study of the initial stress distribution of the periodontal ligament at slightly inferior of the furcation area revealed that the compressive stress in the distobuccal root of the normally positioned tooth moved from the palatal side to the distal side and the buccal side successively as the length of the outer-bow shortened. 6. This study of the initial stress distribution of the periodontal ligament at slightly inferior of the furcation area revealed that the magnitudes of stress were altered but the total stress distributions were not altered in the mesiobuccal root and the palatal root of normally positioned tooth, and also three roots of mesially positioned tooth as the length of the outer-bow shortened.